Optimization Tool - Articles - Scientific Research Publishing

Optimal Design and Control of a Torque Motor for Machine Tools (Articles)

Yee-Pien YANG, Shih-Chin YANG, Jieng-Jang LIU

Journal of Electromagnetic Analysis and Applications Vol.1 No.4, December 31, 2009

DOI: 10.4236/jemaa.2009.14033 10,810 Downloads 19,097 Views Citations
Tool Temperature and Process Modeling of Friction Stir Welding (Articles)

Takashi Nakamura, Toshiyuki Obikawa, Eitaro Yukutake, Satoru Ueda, Itaru Nishizaki

Modern Mechanical Engineering Vol.8 No.1, February 28, 2018

DOI: 10.4236/mme.2018.81006 1,791 Downloads 5,241 Views Citations
This article belongs to the Special Issue on Friction Stir Welding
Development of a Tool Cost Optimization Model for Stochastic Demand of Machined Products (Articles)

Francisco G. Pantoja, Victor Songmene, Jean-Pierre Kenné, Oluwole A. Olufayo, Michael Ayomoh

Applied Mathematics Vol.9 No.12, December 28, 2018

DOI: 10.4236/am.2018.912091 1,503 Downloads 3,984 Views Citations
Optimization and Process Design Tools for Estimation of Weekly Exposure to Air Pollution Integrating Travel Patterns during Pregnancy (Articles)

Valentin Simoncic, Mario Pozzar, Christophe Enaux, Severine Deguen, Wahida Kihal-Talantikite

Open Journal of Statistics Vol.12 No.3, June 30, 2022

DOI: 10.4236/ojs.2022.123026 251 Downloads 1,048 Views Citations
Intelligent Tool Management Strategies for Automated Manufacturing Systems (Articles)

D. Ganeshwar Rao, C. Patvardhan, Ranjit Singh

Intelligent Control and Automation Vol.2 No.4, November 3, 2011

DOI: 10.4236/ica.2011.24046 6,616 Downloads 10,676 Views Citations
Design of Bibliographic Data Management Tool for Small Book Corners (Articles)

Yuhan Cai

Open Access Library Journal Vol.10 No.12, December 29, 2023

DOI: 10.4236/oalib.1110989 70 Downloads 457 Views Citations
Influence of Deep Cryogenic Treatment (DCT) on Thermo Mechanical Performance of AISI H13 Tool Steel (Articles)

Valmik Bhawar, Shreyans Khot, Prakash Kattire, Mohan Mehta, Rajkumar Singh

Journal of Materials Science and Chemical Engineering Vol.5 No.1, January 16, 2017

DOI: 10.4236/msce.2017.51013 4,216 Downloads 6,508 Views Citations
New Ways to Address Competition Challenges in Digital Markets: Reflections and Enlightenment of the EU’s Proposal for a New Competition Tool (Articles)

Qichao Dong

Beijing Law Review Vol.14 No.3, September 21, 2023

DOI: 10.4236/blr.2023.143075 284 Downloads 1,113 Views Citations
Simulation-Based Analysis and Intuitive Visualization of the Cutting Edge Load in Micromilling of Hardened Steel (Articles)

Petra Kersting, Dirk Biermann, Eugen Krebs

Engineering Vol.4 No.9, September 28, 2012

DOI: 10.4236/eng.2012.49068 5,295 Downloads 7,842 Views Citations
An Automatic Cross-System File Generation System for Biological Network Visualization Tools (Articles)

Tianhan Zhang, Xun Lu

Applied Mathematics Vol.5 No.19, November 12, 2014

DOI: 10.4236/am.2014.519296 3,711 Downloads 4,758 Views Citations
This article belongs to the Special Issue on Mathematical Biology
Development and Validation Analysis of Redeemer’s University Alexithymia Scale (RUNAS) (Articles)

Ibukunoluwa Busayo Bello, Ebenezer Olutope Akinnawo, Bede Chinonye Akpunne, Abayomi Olubanjo Olusa

Psychology Vol.13 No.3, March 31, 2022

DOI: 10.4236/psych.2022.133031 344 Downloads 1,366 Views Citations
Implementing a Patient Acuity Tool to Address Fair Nursing Assignments (Articles)

Tonny Mao

Open Journal of Nursing Vol.15 No.8, August 14, 2025

DOI: 10.4236/ojn.2025.158043 146 Downloads 1,270 Views Citations
EVA as Superior Performance Measurement Tool (Articles)

Abdullah Al Mamun, Harry Entebang, Shazali Abu Mansor

Modern Economy Vol.3 No.3, May 22, 2012

DOI: 10.4236/me.2012.33041 16,706 Downloads 27,712 Views Citations
Structural Design via Genetic Optimization (Articles)

David Webb, Wissam Alobaidi, Eric Sandgren

Modern Mechanical Engineering Vol.7 No.3, August 31, 2017

DOI: 10.4236/mme.2017.73006 1,737 Downloads 4,236 Views Citations
The body mass index (BMI) as a public health tool to predict metabolic syndrome (Articles)

Miguel Murguía-Romero, Rafael Jiménez-Flores, Rafael Villalobos-Molina, María Isabel Mendoza-Ramos, Julia Reyes-Reali, Santiago C. Sigrist-Flores, Adolfo René Méndez-Cruz

Open Journal of Preventive Medicine Vol.2 No.1, February 24, 2012

DOI: 10.4236/ojpm.2012.21009 8,884 Downloads 16,885 Views Citations
Development of a simple tool for diagnosis and initial approach to hypertension and pre-hypertension in children and youth (Articles)

Silviu Grisaru, Kay Watson-Jarvis, Catherine M. McKenna, Josephine Ho, Joyce R. Harder, Rebecca A. Trussell

Open Journal of Pediatrics Vol.2 No.2, June 19, 2012

DOI: 10.4236/ojped.2012.22018 5,778 Downloads 10,741 Views Citations
Study of Electroslag Remelted and Nitrogen Containing High Speed Tool Steel M41 (Articles)

S. A. El Badry, Hossam Halfa, A. Ahmed, A. G. Moustafa

Journal of Minerals and Materials Characterization and Engineering Vol.9 No.1, January 20, 2010

DOI: 10.4236/jmmce.2010.91001 5,429 Downloads 7,075 Views Citations
Ion and Gas Nitriding Applied to Steel Tool for Hot Work X38CrMoV5 Nitriding Type: Impact on the Wear Resistance (Articles)

S. Ben Slima

Materials Sciences and Applications Vol.3 No.9, September 27, 2012

DOI: 10.4236/msa.2012.39093 6,013 Downloads 8,900 Views Citations
Photovoltaic Prickle Pear Harvesting Tool (Articles)

Federico Hahn

Natural Resources Vol.4 No.3, July 1, 2013

DOI: 10.4236/nr.2013.43033 4,047 Downloads 6,062 Views Citations
Application of Response Surfaces in Evaluating Tool Performance in Metalcutting (Articles)

Michael R. Delozier

Applied Mathematics Vol.4 No.9, September 20, 2013

DOI: 10.4236/am.2013.49180 3,995 Downloads 6,318 Views Citations

First <12 3 ...>Last

	customer@scirp.org
	+86 18163351462 (WhatsApp)
	1655362766
	SCIRP WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies