[1]
|
Influence of Friction Stir Processing on the Friction, Wear and Corrosion Mechanisms of Solid-State Additively Manufactured 316L Duplex Stainless Steel
|
|
Tribology …,
2023 |
|
|
[2]
|
Laser Powder Bed Fusion Additive Manufacturing of a Low-Modulus Ti–35Nb–7Zr–5Ta Alloy for Orthopedic Applications
|
|
ACS …,
2022 |
|
|
[3]
|
Effect of laser shock peening on ratcheting strain accumulation, fatigue life and bulk texture evolution in HSLA steel
|
|
International Journal of …,
2022 |
|
|
[4]
|
Evaluation of Applied Stress on Atmospheric Corrosion and Pitting Characteristics in 304L Stainless Steel
|
|
…,
2022 |
|
|
[5]
|
Doping and stress induced failure of Ti (Al/Pt) N films on Ti6Al4V plate in a simulated PEMFC environment
|
|
Surface and Coatings …,
2022 |
|
|
[6]
|
Pitting corrosion in 316L stainless steel fabricated by laser powder bed fusion additive manufacturing: a review and perspective
|
|
Britain… - JOM,
2022 |
|
|
[7]
|
Effects of Grain Boundary Angles on Initial Deformation of 304 Austenitic Stainless Steel under Nanoindentation: A Molecular Dynamics Simulation
|
|
Crystals,
2022 |
|
|
[8]
|
Dissimilar Welding of Inconel Alloys With Austenitic Stainless-Steel: A Review
|
|
Journal of …,
2022 |
|
|
[9]
|
Study of the effect of SLM energy density on residual stress and microstructure of porous bone scaffolds in cubic structures
|
|
International Journal for Simulation and …,
2022 |
|
|
[10]
|
Boundary dynamics in 3D printed samples
|
|
2022 |
|
|
[11]
|
Tradeoff between the ion exchange-induced residual stress and ion transport in solid electrolytes
|
|
Chemistry of Materials,
2022 |
|
|
[12]
|
Residual stress impact on corrosion behaviour of hot and cold worked 2205 duplex stainless steel: A study by X-ray diffraction analysis
|
|
Engineering Failure …,
2022 |
|
|
[13]
|
Study on Pitting Corrosion Behavior and Semi in-situ Pitting Corrosion Growth Model of 304L SS With Elastic Stress in NaCl Corrosion Environment
|
|
Corrosion …,
2022 |
|
|
[14]
|
Pitting corrosion behavior of friction-surfaced 17-4PH stainless steel coatings with and without subsequent heat treatment
|
|
Corrosion …,
2021 |
|
|
[15]
|
Stress/strain effects on electrochemical activity: Metallurgical/mechanical/interactions and surface reactivity
|
|
Mechanical and Electro-Chemical Interactions Under …,
2021 |
|
|
[16]
|
1.3 Correlation Between Process Parameters and Properties of Use: Example of Corrosion
|
|
Célérier, B Puga - Ametis,
2021 |
|
|
[17]
|
aAGH—University of Science and Technology, Faculty of Foundry Engineering, Krakow, Poland, bLaboratoire Interdisciplinaire Carnot de Bourgogne (ICB), UMR …
|
|
… to Modelling for Building a Relevant …,
2021 |
|
|
[18]
|
레이저 및 초음파 피닝한 STS316L 의 침지 특성
|
|
대한기계학회 춘추학술 …,
2021 |
|
|
[19]
|
Effect of Repainting Process on Atmospheric Corrosion Behavior of Perforated Panel
|
|
Materials Sciences and …,
2021 |
|
|
[20]
|
Initiation of stress corrosion cracking in cold-drawn prestressing steel in Hardened cement mortar exposed to chlorides
|
|
Corrosion,
2021 |
|
|
[21]
|
On the effect of build orientation and residual stress on the corrosion of 316L stainless steel prepared by selective laser melting
|
|
2021 |
|
|
[22]
|
On the Interaction between Uniaxial Stress Loading and the Corrosion Behavior of the ISO 5832-1 Surgical Stainless Steel
|
|
2021 |
|
|
[23]
|
Corrosion of Additively Manufactured Stainless Steels—Process, Structure, Performance: A Review
|
|
2021 |
|
|
[24]
|
Improvement of the corrosion behavior of AISI 304L stainless steel by deep rolling treatment under cryogenic cooling
|
|
2021 |
|
|
[25]
|
Corrosion Performance of Additively Manufactured Alloys and Hot Corrosion
|
|
2021 |
|
|
[26]
|
Effect of Sub-Zero Treatments and Tempering on Corrosion Behaviour of Vanadis 6 Tool Steel
|
|
2021 |
|
|
[27]
|
Pitting resistance of 316 stainless steel after laser shock peening: Determinants of microstructural and mechanical modifications
|
|
2021 |
|
|
[28]
|
Shot peening effects on fatigue life, corrosion behavior and surface roughness of low carbon alloy steel
|
|
2021 |
|
|
[29]
|
Effect of high‐density current electropulsing on corrosion cracking of titanium aluminide intermetallic
|
|
2021 |
|
|
[30]
|
The Influence of Cryogenic Machining on Surface Integrity and Functional Performance of Titanium Alloys for Biomedical and Aerospace Applications
|
|
2020 |
|
|
[31]
|
The relative influence of surface metallurgy and self-magnetization induced by different manufacturing processes on surface integrity of CoCr alloy using PCM
|
|
2020 |
|
|
[32]
|
The metastable pitting corrosion of 2205 duplex stainless steel under bending deformation
|
|
2020 |
|
|
[33]
|
Influence of combined laser heat treatment and ultrasonic impact treatment on microstructure and corrosion behavior of AISI 1045 steel
|
|
2020 |
|
|
[34]
|
A Complex Evaluation of the State of the Surface Layer of Austenitic Stainless Steel after Abrasive Impact
|
|
2020 |
|
|
[35]
|
Enhancement of Mechanical Properties and Corrosion Resistance of HVOF-Sprayed NiCrBSi Coatings Through Mechanical Attrition Treatment (SMAT)
|
|
2020 |
|
|
[36]
|
Effect of Build Height on the Properties of Large Format Stainless Steel 316L Fabricated via Directed Energy Deposition
|
|
2020 |
|
|
[37]
|
Comparison between cryogenic coolants effect on tool wear and surface integrity in finishing turning of Inconel 718
|
|
2020 |
|
|
[38]
|
Effects of U‐Bending on Pitting Corrosion of 304L Stainless Steel
|
|
2020 |
|
|
[39]
|
Corrosion performance of additively manufactured stainless steel parts: A review
|
|
2020 |
|
|
[40]
|
Metastable pitting behaviour of austenite stainless steel under compressive residual stress
|
|
2019 |
|
|
[41]
|
UTJECAJ HLAÐENJA HLADNIM KOMPRIMIRANIM ZRAKOM NA KOROZIJSKU OTPORNOST PRI OBRADI DIJELOVA OD
|
|
DOCTORAL DISSERTATION,
2019 |
|
|
[42]
|
Spindle speed in friction surfacing of 316L stainless steel–How it affects the microstructure, hardness and pitting corrosion resistance
|
|
2019 |
|
|
[43]
|
Optimization of USSP duration for enhanced corrosion resistance of AA7075
|
|
Ultrasonics,
2019 |
|
|
[44]
|
On the impact of deep rolling at different temperatures on the near surface microstructure and residual stress state of steel AISI 304
|
|
2019 |
|
|
[45]
|
Accelerated biodegradation and improved mechanical performance of pure iron through surface grain refinement
|
|
2019 |
|
|
[46]
|
Macro and Micro Scale Corrosion of 316L Stainless Steel: A Case Study of a Hole Plate
|
|
2019 |
|
|
[47]
|
The Effect of the Static Load in the UNSM Process on the Corrosion Properties of Alloy 600
|
|
2019 |
|
|
[48]
|
Pitting Corrosion in AISI 304 Rolled Stainless Steel Welding at Different Deformation Levels
|
|
2019 |
|
|
[49]
|
Strengthened forced convection–A novel method for improving the pitting corrosion resistance of friction-surfaced stainless steel coating
|
|
2019 |
|
|
[50]
|
Effect of Tensile Stress on the Passivity Breakdown and Repassivation of AISI 304 Stainless Steel: A Scanning Kelvin Probe and Scanning Electrochemical …
|
|
2019 |
|
|
[51]
|
Improving surface integrity and corrosion resistance of additive manufactured Ti6Al4V alloy by cryogenic machining
|
|
2019 |
|
|
[52]
|
Effect of Strain on General and Localized Corrosion Behavior of Steels
|
|
2019 |
|
|
[53]
|
Corrosion behavior of surface induced by wire EDM on 316L stainless steel: an experimental investigation
|
|
2019 |
|
|
[54]
|
Potential Studies of Waterjet Cavitation Peening on Surface Treatment, Fatigue and Residual Stress
|
|
2019 |
|
|
[55]
|
Effect of the Amplitude in Ultrasonic Nano-crystalline Surface Modification on the Corrosion Properties of Alloy 600
|
|
2019 |
|
|
[56]
|
Electrochemical studies on the effect of residual stress on the corrosion of 316L manufactured by selective laser melting
|
|
2019 |
|
|
[57]
|
Utjecaj hlađenja hladnim komprimiranim zrakom na korozijsku otpornost pri obradi dijelova od nehrađajućeg čelika
|
|
2019 |
|
|
[58]
|
Electrochemical Approach on the Corrosion During the Cavitation of Additive Manufactured Commercially Pure Titanium
|
|
2018 |
|
|
[59]
|
Effect of ultrasonic shot peening on microstructure, low cycle fatigue and corrosion behaviour of AA7075 aluminium alloy
|
|
2018 |
|
|
[60]
|
Investigation of the passivation process of plastically deformed 316L stainless steel using the high frequency capacitance obtained by EIS
|
|
Precision Radiation Oncology,
2018 |
|
|
[61]
|
Influence of the cold working induced martensite on the electrochemical behavior of AISI 304 stainless steel surfaces
|
|
Journal of Materials Research and Technology,
2018 |
|
|
[62]
|
Microstructures and Salt Spray Corrosion Behaviour of a Laser Thermal Sprayed Al Coating on a S355 Steel Substrate.
|
|
Lasers in Engineering (Old City Publishing),
2018 |
|
|
[63]
|
Effects of laser remelting on microstructures and immersion corrosion performance of arc sprayed Al coating in 3.5% NaCl solution
|
|
Optics & Laser Technology,
2018 |
|
|
[64]
|
Atomic Layer-Deposited TiO2 Coatings on NiTi Surface
|
|
Journal of Materials Engineering and Performance,
2018 |
|
|
[65]
|
Study on the evolution of residual stress in successive machining process
|
|
The International Journal of Advanced Manufacturing Technology,
2018 |
|
|
[66]
|
Electrochemical behavior of AISI316L stainless steel parts produced by laser-based powder bed fusion process and the effect of post annealing process
|
|
Additive Manufacturing,
2018 |
|
|
[67]
|
Failure analysis of AISI 321 stainless steel welded pipes in solar thermal power plants
|
|
Engineering Failure Analysis,
2018 |
|
|
[68]
|
Fabrication of stainless steel 316L/TiB2 composite coating via friction surfacing
|
|
Surface and Coatings Technology,
2018 |
|
|
[69]
|
An Investigation of Surface Corrosion Behavior of Inconel 718 after Robotic Belt Grinding
|
|
2018 |
|
|
[70]
|
적층가공 방식으로 제조된 CP-Ti 의 캐비테이션중 부식에 대한 전기화학적 접근
|
|
2018 |
|
|
[71]
|
Effect of Cold-work on Repassivation and Corrosion Behaviors of Carbon Steels A569
|
|
2017 |
|
|
[72]
|
Effect of friction stir processing on the corrosion behavior of pure Mg
|
|
Protection of Metals and Physical Chemistry of Surfaces,
2017 |
|
|
[73]
|
Laser shock peening enhanced corrosion properties in a nickel based Inconel 600 superalloy
|
|
Journal of Alloys and Compounds,
2017 |
|
|
[74]
|
Effect of pulsed magnetic treatment on the corrosion of titanium
|
|
Journal of Reproductive and Infant Psychology,
2017 |
|
|
[75]
|
Effect of laser peening on electrochemical properties of titanium stabilized 321 steel
|
|
Materials Chemistry and Physics,
2017 |
|
|
[76]
|
Influence of the machining cooling strategies on the dental tribocorrosion behaviour of wrought and additive manufactured Ti6Al4V
|
|
Biotribology,
2017 |
|
|
[77]
|
On the enhanced corrosion resistance of a selective laser melted austenitic stainless steel
|
|
Scripta Materialia,
2017 |
|
|
[78]
|
Effect of Ultrasonic Nano-Crystal Surface Modification (UNSM) on the Passivation Behavior of Aged 316L Stainless Steel
|
|
Materials,
2017 |
|
|
[79]
|
Fretting Corrosion Behavior of Additive Manufactured and Cryogenic‐Machined Ti6Al4V for Biomedical Applications
|
|
Advanced Engineering Materials,
2016 |
|
|
[80]
|
Using Cavitation Peening to Improve the Fatigue Life of Titanium Alloy Ti-6Al-4V Manufactured by Electron Beam Melting
|
|
Materials Sciences and Applications,
2016 |
|
|
[81]
|
Influence of Laser Peening on Phase Transformation and Corrosion Resistance of AISI 321 steel
|
|
Journal of Materials Engineering and Performance,
2016 |
|
|
[82]
|
Intergranular Corrosion Mechanism of Slightly-sensitized and UNSM-treated 316L Stainless Steel
|
|
2016 |
|
|
[83]
|
A Facile Method to Modify the Characteristics and Corrosion Behavior of 304 Stainless Steel by Surface Nanostructuring toward Biomedical Applications
|
|
ACS applied materials & interfaces,
2015 |
|
|
[84]
|
Intergranular corrosion of 316L stainless steel by aging and UNSM (ultrasonic nano-crystal surface modification) treatment
|
|
2015 |
|
|
[85]
|
시효열처리 및 UNSM 처리에 따른 316L 스테인리스강의 입계부식거동
|
|
Corrosion Science and Technology,
2015 |
|
|
[86]
|
시효열처리및 UNSM 처리에 따른 316L 스테인리스강의 입계부식거동
|
|
2015 |
|
|
[87]
|
Improved corrosion and cavitation erosion resistance of laser-based powder bed fusion produced Ti-6Al-4V alloy by pulsed magnetic field treatment
|
|
|
|
|