Author(s)

Ossama E. Gouda¹, Sohair F. Mahmoud², Ahmed A. El-Gendy³, Ahmed S. Haiba²

¹Electrical Department, Faculty of Engineering, Cairo University, Giza, Egypt.
²High Voltage Metrology Lab, National Institute of Standards (NIS), Giza, Egypt.
³Nanotechnology and Nanometrology Lab, National Institute of Standards (NIS), Giza, Egypt.

Polymer nanocomposites have been used for various important industrial applications. The preparation of high density polyethylene composed with Na-montmorillonite nanofiller using melt compounding method for different concentrations of clay-nanofiller of 0%, 2%, 6%, 10%, and 15% has been successfully done. The morphology of the obtained samples was optimized and characterized by scanning electron microscope showing the formation of the polymer nanocomposites. The thermal stability and dielectric properties were measured for the prepared samples. Thermal gravimetric analysis results show that thermal stability in polymer nanocomposites is more than that in the base polymer. It has been shown that the polymer nanocomposites exhibit some very different dielectric characteristics when compared to the base polymer. The dielectric breakdown strength is enhanced by the addition of clay-nanofiller. The dielectric constant (εr) and dissipation factor (Tan δ) have been studied in the frequency range 200 Hz to 2 MHz at room temperature indicating that enhancements have been occurred in εr and Tan δ by the addition of clay-nanofiller in the polymer material when compared with the pure material.

Polymer Nanocomposites, High Density Polyethylene, Dielectric Breakdown, Dielectric Constant, Dissipation Factor

Gouda, O. , Mahmoud, S. , El-Gendy, A. and Haiba, A. (2014) Improving the Dielectric Properties of High Density Polyethylene by Incorporating Clay-Nanofiller. World Journal of Engineering and Technology, 2, 289-297. doi: 10.4236/wjet.2014.24030.