Author(s)

Sepideh Hosseinzadeh, Mofid Gorji-Bandpy, Ghasem Javadi Rad, Mojtaba Keshavarz

Department of Mechanical Engineering, Babol Universityof Tecjnology, Babol, Iran.
Iran Heavy Diesel Engine Mfg Co (DESA), Amol, Iran.

At high altitudes, power of an internal combustion engine reduces due to air density reduction. In turbocharged diesel engine this issue affects the performance of the compressor and can result in unstable operation of the turbocharger if the power is not decreased by engine actuator. Mainly for testing the effects of altitude in the test room, air throttle valve and combustion air handling unit were used to reduce the suction air pressure. Easier and cheaper solution to consider effect of altitude on engine performance is to mask part of the air filter to reduce the suction pressure. In this paper, pressure drop against 0%, 26%, 52%, 66% and 74% of air filter hole’s masking for different mass flow rates has been studied by computational fluid dynamics. The analysis output mass flow rate-pressure diagram for the air filter, will be used as input data in the GT-Power software which is a one-dimensional computational fluid dynamics software and the effect of masking on altitude and performance at different revolutions per minute of the engine is investigated. Also, an experimental and computational fluid dynamics study was carried out to predict altitude against different proportions of air filter hole’s masking at 1000 rpm. The predicted results are validated by comparing with those of experimental data. A good agreement between the predicted and experimental values ensures the accuracy of the numerical predictions with the present work.

Heavy-Duty Engine, Pressure Drop, Altitude, Mass Flow Rate

S. Hosseinzadeh, M. Gorji-Bandpy, G. Rad and M. Keshavarz, "Experimental and Numerical Study of Impact of Air Filter Holes Masking on Altitude at Heavy-Duty Diesel Engine," Modern Mechanical Engineering, Vol. 2 No. 4, 2012, pp. 157-166. doi: 10.4236/mme.2012.24021.