Department of Mechanical Engineering, Rajarambapu Institute of Technology, Islampur, India - Articles

Design Optimization of Cam & Follower Mechanism of an Internal Combustion Engine for Improving the Engine Efficiency (Articles)

Mahesh R. Mali, Prabhakar D. Maskar, Shravan H. Gawande, Jay S. Bagi

Modern Mechanical Engineering Vol.2 No.3，August 31, 2012

DOI: 10.4236/mme.2012.23014 16,827 Downloads 30,003 Views Citations
Simulation of Runoff and Sediment Yield for a Kaneri Watershed Using SWAT Model (Articles)

Vidula A. Swami, Sushama S. Kulkarni

Journal of Geoscience and Environment Protection Vol.4 No.1，December 25, 2015

DOI: 10.4236/gep.2016.41001 4,373 Downloads 6,433 Views Citations
Influence of Boron Fiber Powder and Graphite Reinforcements on Physical and Mechanical Properties of Aluminum 2024 Alloy Fabricated by Stir Casting (Articles)

H. S. Kumaraswamy, Vinjamuri Bharat, T. Krishna Rao

J. of Minerals and Materials Characterization and Eng. Vol.7 No.3，April 19, 2019

DOI: 10.4236/jmmce.2019.73008 971 Downloads 2,100 Views Citations
Influence of Water Ageing on Mechanical Properties of CaCO₃ Filler Filled Epoxy Resin and Sansevieria/Carbon Fiber Reinforced Composites (Articles)

Naveed Anjum, Bheemappa Suresha, Somanahally Lingaiah Ajit Prasad

Open Journal of Composite Materials Vol.9 No.1，January 18, 2019

DOI: 10.4236/ojcm.2019.91001 1,317 Downloads 2,924 Views Citations
Comparative Residual Stress Analysis in Welded Joints Using Both Experimental and Numerical Techniques (Articles)

Rajshekhar B. Aloor, Ramakrishna H V, Nagabhushana Musalammagri

J. of Minerals and Materials Characterization and Eng. Vol.7 No.4，June 20, 2019

DOI: 10.4236/jmmce.2019.74011 1,021 Downloads 2,054 Views Citations
Modeling a Controller for an Articulated Robotic Arm (Articles)

Rajeev Agrawal, Koushik Kabiraj, Ravi Singh

Intelligent Control and Automation Vol.3 No.3，August 30, 2012

DOI: 10.4236/ica.2012.33023 16,453 Downloads 21,815 Views Citations
Energy Parameter Correlation of Failure Life Data between Cyclic Ball Indentation and Low Cycle Fatigue (Articles)

Aneesh Bangia, Raghu V. Prakash

Open Journal of Metal Vol.2 No.1，March 30, 2012

DOI: 10.4236/ojmetal.2012.21005 4,557 Downloads 9,660 Views Citations
Machinability Study of Al-5Cu-TiB₂ In-situ Metal Matrix Composites Fabricated by Flux-assisted Synthesis (Articles)

A. Mahamani

J. of Minerals and Materials Characterization and Eng. Vol.10 No.13，November 1, 2011

DOI: 10.4236/jmmce.2011.1013097 3,965 Downloads 6,285 Views Citations
Effect of Micro Size Cenosphere Particles Reinforcement on Tribological Characteristics of Vinylester Composites under Dry Sliding Conditions (Articles)

Santram Chauhan, Sunil Thakur

J. of Minerals and Materials Characterization and Eng. Vol.11 No.10，October 31, 2012

DOI: 10.4236/jmmce.2012.1110092 7,428 Downloads 9,923 Views Citations
Finite Element Modeling of Stress Strain Curve and Micro Stress and Micro Strain Distributions of Titanium Alloys— A Review (Articles)

Gangi Setti Srinivasu, Narasimha Rao Raja

J. of Minerals and Materials Characterization and Eng. Vol.11 No.10，October 31, 2012

DOI: 10.4236/jmmce.2012.1110094 7,217 Downloads 10,028 Views Citations
Study of various molar crown designs and their assessment (Articles)

Rashmi Uddanwadiker

Journal of Biomedical Science and Engineering Vol.5 No.11，November 26, 2012

DOI: 10.4236/jbise.2012.511077 3,954 Downloads 5,919 Views Citations
Fabrication and Characterizations of Mechanical Properties of Al-4.5%Cu/10TiC Composite by In-situ Method (Articles)

Anand Kumar, Manas Mohan Mahapatra, Pradeep Kumar Jha

J. of Minerals and Materials Characterization and Eng. Vol.11 No.11，November 30, 2012

DOI: 10.4236/jmmce.2012.1111113 7,266 Downloads 10,505 Views Citations
Influence of Reinforcement Type on Microstructure, Hardness, and Tensile Properties of an Aluminum Alloy Metal Matrix Composite (Articles)

Belete Sirahbizu Yigezu, Manas Mohan Mahapatra, Pradeep Kumar Jha

J. of Minerals and Materials Characterization and Eng. Vol.1 No.4，July 4, 2013

DOI: 10.4236/jmmce.2013.14022 7,722 Downloads 12,296 Views Citations
Application of AHP/EVAMIX Method for Decision Making in the Industrial Environment (Articles)

Veera P. Darji, Ravipudi V. Rao

American Journal of Operations Research Vol.3 No.6，November 19, 2013

DOI: 10.4236/ajor.2013.36053 7,085 Downloads 12,250 Views Citations
A Study on Microhardness, Microstructure and Wear Properties of Plasma Transferred Arc Hardfaced Structural Steel with Titanium Carbide (Articles)

Balamurugan Sivaramakrishnan, Murugan Nadarajan

J. of Minerals and Materials Characterization and Eng. Vol.2 No.3，April 30, 2014

DOI: 10.4236/jmmce.2014.23020 3,553 Downloads 4,902 Views Citations
Computational Study on Effect of Variation of Pitch-Chord on Secondary Losses in Rectilinear Turbine Cascade (Articles)

Pulijala Shravya

Engineering Vol.7 No.11，November 11, 2015

DOI: 10.4236/eng.2015.711064 4,427 Downloads 5,364 Views Citations
Effect of Nozzle Shaped Triangular Longitudinal Fins on Heat Transfer (Articles)

Pulijala Shravya

Engineering Vol.8 No.12，December 5, 2016

DOI: 10.4236/eng.2016.812075 1,554 Downloads 3,214 Views Citations
Scanning Electron Microscopy (SEM) Analysis and Hardness of Diffusion Bonded Titanium-Titanium and Titanium-Copper Plates with Static Force and without Interlayers (Articles)

Joel Hemanth

Open Journal of Composite Materials Vol.7 No.2，April 30, 2017

DOI: 10.4236/ojcm.2017.72007 1,419 Downloads 3,427 Views Citations
Thermal Load Reduction with Green Building Envelope (Articles)

Dilawar Husain, Sarvesh Shukla, Vivek Kumar Umrao, Ravi Prakash

Open Journal of Energy Efficiency Vol.6 No.3，September 25, 2017

DOI: 10.4236/ojee.2017.63009 1,700 Downloads 5,045 Views Citations
Development and Characterization of Carbon Nanotube Reinforced Aluminium-6061 Metal Matrix Composites (Articles)

Preethi. K, Raju T.N, Shivappa H.A

J. of Minerals and Materials Characterization and Eng. Vol.9 No.3，May 27, 2021

DOI: 10.4236/jmmce.2021.93020 381 Downloads 1,947 Views Citations

<12 3 ...>

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies