Additive Manufacturing - Articles - Scientific Research Publishing

Improved Transfer Process for the Fully Additive Manufacturing of a Conductive Layer-Stacked Polymeric Cantilever (Articles)

Shusuke Kanazawa, Yasuyuki Kusaka, Noritaka Yamamoto, Hirobumi Ushijima

Materials Sciences and Applications Vol.10 No.1，January 14, 2019

DOI: 10.4236/msa.2019.101005 743 Downloads 1,430 Views Citations
This article belongs to the Special Issue on Material Processing
Additive Manufacturing of SiC Ceramics with Complicated Shapes Using the FDM Type 3D-Printer (Articles)

Hisaya Masuda, Yoshio Ohta, Mikito Kitayama

Journal of Materials Science and Chemical Engineering Vol.7 No.2，February 26, 2019

DOI: 10.4236/msce.2019.72001 2,523 Downloads 4,607 Views Citations
Application and Development of 3D Printing in Medical Field (Articles)

Sun Chunhua, Shang Guangqing

Modern Mechanical Engineering Vol.10 No.3，August 10, 2020

DOI: 10.4236/mme.2020.103003 1,871 Downloads 8,967 Views Citations
Research Progress of Additive Manufacturing Technology in Energetic Material Field at Home and Abroad (Articles)

Runpeng Jiang

Journal of Materials Science and Chemical Engineering Vol.12 No.3，March 29, 2024

DOI: 10.4236/msce.2024.123005 188 Downloads 656 Views Citations
Design Consideration for Additive Manufacturing: Fused Deposition Modelling (Articles)

Ala’aldin Alafaghani, Ala Qattawi, Muhammad Ali Ablat

Open Journal of Applied Sciences Vol.7 No.6，June 29, 2017

DOI: 10.4236/ojapps.2017.76024 3,928 Downloads 10,486 Views Citations
Effect of 3D Printing Technology on 3C Product Manufacturing (Articles)

Guangqing Shang, Chunhua Sun

World Journal of Engineering and Technology Vol.8 No.4，November 9, 2020

DOI: 10.4236/wjet.2020.84051 911 Downloads 4,918 Views Citations
Additive Manufacturing: The Most Promising Technology to Alter the Supply Chain and Logistics (Articles)

Mohsen Attaran

Journal of Service Science and Management Vol.10 No.3，May 4, 2017

DOI: 10.4236/jssm.2017.103017 9,678 Downloads 17,457 Views Citations
This article belongs to the Special Issue on Supply Chain Management
A Design Modification Approach to Utilize the Benefits of Metal Additive Manufacturing Adoption (Articles)

Jun Hao Tan, Wee Koon Woon, Wai Leong Eugene Wong

Journal of Materials Science and Chemical Engineering Vol.4 No.7，July 25, 2016

DOI: 10.4236/msce.2016.47008 2,119 Downloads 4,146 Views Citations
Influence of Bed Temperature on Heat Shrinkage Shape Error in FDM Additive Manufacturing of the ABS-Engineering Plastic (Articles)

Young-Hyu Choi, Cheol-Min Kim, Hwan-Seock Jeong, Jeong-Ho Youn

World Journal of Engineering and Technology Vol.4 No.3D，October 20, 2016

DOI: 10.4236/wjet.2016.43D022 2,856 Downloads 7,008 Views Citations
The Impact of 3D Printing Technology to the Nigerian Manufacturing GDP (Articles)

Vincent A. Balogun, Omonigho B. Otanocha, Akii O. Ibhadode

Modern Mechanical Engineering Vol.8 No.2，May 15, 2018

DOI: 10.4236/mme.2018.82010 1,923 Downloads 5,343 Views Citations
Development of Laser Fusion Printing Machine for Ceramic Teeth Crown (Articles)

Risheng Zhang, Jialin Yang, Zhiqun Wu, Xiaohui Tang, Wei Yu, Shaoxing Ma, Fang Ji

J. of Minerals and Materials Characterization and Eng. Vol.6 No.4，July 11, 2018

DOI: 10.4236/jmmce.2018.64033 1,457 Downloads 2,717 Views Citations
Laser Polishing of Laser Powder Bed Fusion AlSi10Mg Parts—Influence of Initial Surface Roughness on Achievable Surface Quality (Articles)

Markus Hofele, Andre Roth, Jochen Schanz, David K. Harrison, Anjali K. M. De Silva, Harald Riegel

Materials Sciences and Applications Vol.12 No.1，January 20, 2021

DOI: 10.4236/msa.2021.121002 738 Downloads 2,587 Views Citations
This article belongs to the Special Issue on Material Surface Engineering
On Application of Metal Additive Manufacturing (Articles)

Chunhua Sun, Guangqing Shang

World Journal of Engineering and Technology Vol.9 No.1，February 26, 2021

DOI: 10.4236/wjet.2021.91014 1,161 Downloads 3,497 Views Citations
Additively Manufactured Ti-6Al4V before and after Hot Isostatic Pressing (Articles)

Brad Baker, Keegan Wisdom

World Journal of Engineering and Technology Vol.9 No.2，May 8, 2021

DOI: 10.4236/wjet.2021.92019 1,109 Downloads 2,285 Views Citations
A Scientific Review on Various Pellet Extruders Used in 3D Printing FDM Processes (Articles)

Yousuf Pasha Shaik, Jens Schuster, Aarif Shaik

Open Access Library Journal Vol.8 No.8，July 29, 2021

DOI: 10.4236/oalib.1107698 1,294 Downloads 11,643 Views Citations
Effect of Laser Cladding Processing Parameters on Nitinol’s Clad Dimensions, Microstructure, and Hardness (Articles)

Engy M. Zain, Ahmed Farid Youssef, Ahmad El Sabbagh, Sisa Pityana, Mohamed A. Taha

Materials Sciences and Applications Vol.12 No.12，December 24, 2021

DOI: 10.4236/msa.2021.1212040 273 Downloads 1,001 Views Citations
Quantitative Simulation Study of Metal Additive Manufacturing by Kinetic Monte Carlo (Articles)

Kepeng Ouyang, Youdi Kuang

Journal of Applied Mathematics and Physics Vol.10 No.5，May 18, 2022

DOI: 10.4236/jamp.2022.105110 233 Downloads 965 Views Citations
Effect of Acetone Vapor Smoothing Process on Surface Finish and Geometric Accuracy of Fused Deposition Modeling ABS Parts (Articles)

Viviane Pestano, Mariana Pohlmann, Fabio Pinto da Silva

Journal of Materials Science and Chemical Engineering Vol.10 No.10，October 24, 2022

DOI: 10.4236/msce.2022.1010001 204 Downloads 1,148 Views Citations
Characterization and Modeling of Mechanical Properties of Additively Manufactured Coconut Fiber-Reinforced Polypropylene Composites (Articles)

George Mosi, Bernard W. Ikua, Samuel K. Kabini, James W. Mwangi

Advances in Materials Physics and Chemistry Vol.14 No.6，June 21, 2024

DOI: 10.4236/ampc.2024.146008 121 Downloads 742 Views Citations
High Temperature Mechanical Properties of Additive Manufacturing CoCr F75 Alloy (Articles)

Daniel Moreno, Yohanan Nachmana, Matan Zakai, Omer Hollander, Ishai Alon, Elinor Itzhak, Moshe Shapira

J. of Minerals and Materials Characterization and Eng. Vol.13 No.2，February 28, 2025

DOI: 10.4236/jmmce.2025.132003 50 Downloads 177 Views Citations

<12 3 ...>

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies