Power Management Integrated Circuit with 90Plus Efficiency Used in AC/DC Converter ()
Abstract
Recently, resonant AC/DC converter has been accepted by the industry. However, the efficiency will be decreased at light load. So, a novel topology with critical controlling mode combined with resonant ones is proposed in this paper. The new topology can correspond to a 90 plus percent of power converting. So，a novel topology of an state of-art integrated circuit, which can be used as power management circuit, has been designed based on the above new topology. A simulator which is specific suitable for the power controller has been founded in this work and it has been used for the simulation of the novel architecture and the proposed integrated circuit.
Share and Cite:
Y. JIANG, "Power Management Integrated Circuit with 90Plus Efficiency Used in AC/DC Converter,"
Energy and Power Engineering, Vol. 1 No. 2, 2009, pp. 100-109. doi:
10.4236/epe.2009.12016.
Conflicts of Interest
The authors declare no conflicts of interest.
References
|
[1]
|
R. D. Middlebrook and S. Cuk, “A general unified approach to modeling switching converter power stages [J],” IEEE PESC, Vol. 21, No. 1, pp. 18–34, 2005.
|
|
[2]
|
Y. F. Jiang and M. X. Xie, “Micro-nano electron devices [M],” Chemical Industry Press, Beijing, 2005.
|
|
[3]
|
R. Keller, “Closed loop testing and computer analysis aid design of control systems [J],” Electronic Design, Vol. 22, No. 12, pp. 132–138, 1978.
|
|
[4]
|
V. Vorperian, “Simplified analysis of PWM converters using the model of the PWM switch, Parts I (CCM) and II (DCM) [J],” Transactions on Aerospace and Electronics Systems, Vol. 26, No. 3, pp. 21–48, 1990.
|
|
[5]
|
S. Sandler, “SMPS simulations with SPICE3 [M],” Mc- Graw, 1990.
|
|
[6]
|
S. Ben-Yaakov, “Average simulation of PWM converters by direct implementation of behavioral relationships [C],” IEEE Applied Power Electronics Conference (APEC’93), pp. 510–516, 1993.
|