has been cited by the following article(s):
[1]
|
Comparison of Specific Wear Rates of Austenitic and Super Austenitic Stainless Steels at High Temperatures
|
|
Zanco Journal of Pure and …,
2022 |
|
|
[2]
|
Experimental Investigation And Modeling Specific Wear Rate Of AISI 304 Using Response Surface Methodology
|
|
Webology (ISSN: 1735-188X),
2022 |
|
|
[3]
|
Microstructural charactistics of plasma sprayed NiCrBSi coatings and their wear and corrosion behaviors
|
|
2021 |
|
|
[4]
|
Developing partially oxidized NiCr coatings using the combined flame spray and plasma spray process for improved wear behaviour at high temperature
|
|
2021 |
|
|
[5]
|
Densification behaviour and the effect of heat treatment on microstructure, and mechanical properties of sintered nickel-based alloys
|
|
2019 |
|
|
[6]
|
Oxidation Effects on wear Resistance of SS-304 and SS-316 Austenitic Stainless Steels
|
|
International Journal of Innovative Technology and Exploring Engineering,
2019 |
|
|
[7]
|
TiN and TiCN Coated Stainless Steel 316 Ultrosonic Cavitation Probe for High Temperature Application
|
|
Silicon,
2018 |
|
|
[8]
|
Improvement of the abrasive wear resistance of pump shaft (AISI 316L stainless steel) by salt bath nitriding
|
|
2017 |
|
|
[9]
|
Effect of sintering parameters on densification, corrosion and wear behaviour of Ni-50Fe alloy prepared by spark plasma sintering
|
|
Journal of Alloys and Compounds,
2016 |
|
|
[10]
|
Thermal Spray Coatings for Blast Furnace Tuyere Application
|
|
Journal of Thermal Spray Technology,
2015 |
|
|
[11]
|
Dry sliding wear behaviour of in situ Al–TiB2 composites
|
|
Materials & Design (1980-2015),
2013 |
|
|
[12]
|
Dry sliding wear behaviour of in situ Al–TiB 2 composites
|
|
Materials & Design,
2013 |
|
|
[13]
|
基于铸辗复合成形的42CrMo 钢环件摩擦磨损性能的试验研究
|
|
热加工工艺,
2013 |
|
|
[14]
|
Differentiation of Specific Wear Rates of AISI 304 Austenitic and AISI 2205 Duplex Stainless Steels at Room and High Temperatures
|
|
|
|
|
[1]
|
Mn-Fe Prussian blue analogue as low-cost robust cathode for non-aqueous Zn-ion batteries
Materials Today Communications,
2023
DOI:10.1016/j.mtcomm.2022.105231
|
|
|
[2]
|
Mn-Fe Prussian blue analogue as low-cost robust cathode for non-aqueous Zn-ion batteries
Materials Today Communications,
2023
DOI:10.1016/j.mtcomm.2022.105231
|
|
|
[3]
|
Effect of Strain Hardening on Wear and Corrosion Resistance of 316L Austenitic Stainless Steel
Journal of Materials Engineering and Performance,
2023
DOI:10.1007/s11665-023-08535-8
|
|
|
[4]
|
Mn-Fe Prussian blue analogue as low-cost robust cathode for non-aqueous Zn-ion batteries
Materials Today Communications,
2023
DOI:10.1016/j.mtcomm.2022.105231
|
|
|
[5]
|
Microstructural Charactistics of Plasma Sprayed NiCrBSi Coatings and Their Wear and Corrosion Behaviors
Coatings,
2021
DOI:10.3390/coatings11020170
|
|
|