Top Cited Articles
(858 articles with 24823 citations as of July 2024)

• Development of Aluminium Based Silicon Carbide Particulate Metal Matrix Composite, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.6, 2009
• Manoj Singla, D. Deepak Dwivedi, Lakhvir Singh, Vikas Chawla
• Citations: 663 (Details)

• Automated Scanning Electron Microscope Based Mineral Liberation Analysis An Introduction to JKMRC/FEI Mineral Liberation Analyser, Journal of Minerals and Materials Characterization and Engineering, Vol.2 No.1, 2003
• Ying Gu
• Citations: 583 (Details)

• Carbon Nanotube Based Composites- A Review, Journal of Minerals and Materials Characterization and Engineering, Vol.4 No.1, 2005
• Rupesh Khare, Suryasarathi Bose
• Citations: 568 (Details)

• Studies on Al6061-SiC and Al7075-Al₂O₃ Metal Matrix Composites, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.1, 2010
• G. B. Veeresh Kumar, C. S. P. Rao, N. Selvaraj, M. S. Bhagyashekar
• Citations: 522 (Details)

• Mechanical and Tribological Behavior of Particulate Reinforced Aluminum Metal Matrix Composites – a review, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.1, 2011
• G. B. Veeresh Kumar, C. S. P. Rao, N. Selvaraj
• Citations: 501 (Details)

• Characterizing and Modeling Mechanical Properties of Nanocomposites-Review and Evaluation, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.4, 2010
• Hurang Hu, Landon Onyebueke, Ayo Abatan
• Citations: 333 (Details)

• A Comparative Study on the Microstructures and Mechanical Properties of Al 6061 Alloy and the MMC Al 6061/TiB₂/12_p, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.1, 2010
• T.V. Christy, N. Murugan, S. Kumar
• Citations: 294 (Details)

• A Review on Mechanical Properties of Natural Fiber Reinforced Hybrid Polymer Composites, Journal of Minerals and Materials Characterization and Engineering, Vol.3 No.5, 2015
• K. P. Ashik, Ramesh S. Sharma
• Citations: 264 (Details)

• Mechanical Properties of Epoxy Resin – Fly Ash Composite, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.3, 2010
• Manoj Singla, Vikas Chawla
• Citations: 254 (Details)

• Tribological Behaviour of Aluminium/Alumina/Graphite Hybrid Metal Matrix Composite Using Taguchi’s Techniques, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.5, 2011
• N. Radhika, R. Subramanian, S. Venkat Prasat
• Citations: 254 (Details)

• Synthesis and Characterization of Hydroxyapatite Powder by Sol-Gel Method for Biomedical Application, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.8, 2011
• Khelendra Agrawal, Gurbhinder Singh, Devendra Puri, Satya Prakash
• Citations: 225 (Details)

• Carbon Nanotube Reinforced Ceramic Matrix Composites- A Review, Journal of Minerals and Materials Characterization and Engineering, Vol.7 No.4, 2008
• Subhranshu Sekhar Samal, Smrutisikha Bal
• Citations: 210 (Details)

• The Role of Fillers on Friction and Slide Wear Characteristics in Glass-Epoxy Composite Systems, Journal of Minerals and Materials Characterization and Engineering, Vol.5 No.1, 2006
• B. Suresha, G. Chandramohan, J. N. Prakash, V. Balusamy, K. Sankaranarayanasamy
• Citations: 209 (Details)

• Studies on Processing and Characterization of Hydroxyapatite Biomaterials from Different Bio Wastes, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.1, 2012
• Sudip Mondal, Biswanath Mondal, Apurba Dey, Sudit S. Mukhopadhyay
• Citations: 195 (Details)

• Assessing Mechanical Properties of Natural Fibre Reinforced Composites for Engineering Applications, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.8, 2012
• O. D. Samuel, S. Agbo, T. A. Adekanye
• Citations: 193 (Details)

• Potential Utilization of Solid Waste (Bagasse Ash), Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.1, 2010
• V. S. Aigbodion, S. B. Hassan, T. Ause, G.B. Nyior
• Citations: 188 (Details)

• Synthesis of Hydroxyapatite Bio-Ceramic Powder by Hydrothermal Method, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.8, 2010
• P. Hui, S.L. Meena, Gurbhinder Singh, R.D. Agarawal, Satya Prakash
• Citations: 182 (Details)

• Study of Mechanical Behaviour of Coconut Shell Reinforced Polymer Matrix Composite, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.8, 2012
• Agunsoye J. Olumuyiwa, Talabi S. Isaac, Sanni O. Samuel
• Citations: 182 (Details)

• MRR Improvement in Sinking Electrical Discharge Machining: A Review, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.8, 2010
• Kuldeep Ojha, R. K. Garg, K. K. Singh
• Citations: 181 (Details)

• Effect of Filler Materials on Dry Sliding Wear Behavior of Polymer Matrix Composites – A Taguchi Approach, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.5, 2009
• S. Basavarajappa, K.V. Arun, J. Paulo Davim
• Citations: 180 (Details)

• Effect of Heat Treatment on Mechanical Properties and Microstructure of NST 37-2 Steel, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.3, 2011
• D. A. Fadare, T. G. Fadara, O. Y. Akanbi
• Citations: 177 (Details)

• Corrosion Behavior of Alumina Reinforced Aluminium (6063) Metal Matrix Composites, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.12, 2011
• K. K. Alaneme, M. O. Bodunrin
• Citations: 176 (Details)

• Strength Characterization of E-glass Fiber Reinforced Epoxy Composites with Filler Materials, Journal of Minerals and Materials Characterization and Engineering, Vol.1 No.6, 2013
• K. Devendra, T. Rangaswamy
• Citations: 176 (Details)

• Experimental Methods of Determining Fracture Toughness of Fiber Reinforced Polymer Composites under Various Loading Conditions, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.13, 2011
• M.S. Sham Prasad, C.S. Venkatesha, T. Jayaraju
• Citations: 175 (Details)

• Review to EDM by Using Water and Powder-Mixed Dielectric Fluid, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.2, 2011
• Sharanjit Singh, Arvind Bhardwaj
• Citations: 174 (Details)

• Study of Wear Properties of Al-SiC Composites, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.10, 2009
• Manoj Singla, Lakhvir Singh, Vikas Chawla
• Citations: 172 (Details)

• Influence of Reinforcement Type on Microstructure, Hardness, and Tensile Properties of an Aluminum Alloy Metal Matrix Composite, Journal of Minerals and Materials Characterization and Engineering, Vol.1 No.4, 2013
• Belete Sirahbizu Yigezu, Manas Mohan Mahapatra, Pradeep Kumar Jha
• Citations: 154 (Details)

• Effect Of Flyash On The Mechanical, Thermal, Dielectric,Rheological And Morphological Properties Of Filled Nylon 6, Journal of Minerals and Materials Characterization and Engineering, Vol.3 No.2, 2004
• Suryasarathi Bose, P.A. Mahanwar
• Citations: 151 (Details)

• Studies on Mechanical Properties of Jute/E-Glass Fiber Reinforced Epoxy Hybrid Composites, Journal of Minerals and Materials Characterization and Engineering, Vol.4 No.1, 2016
• M. R. Sanjay, B. Yogesha
• Citations: 151 (Details)

• Safety and Risk Associated with Nanoparticles - A Review, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.5, 2010
• Vinita Vishwakarma, Subhranshu Sekhar Samal, N. Manoharan
• Citations: 144 (Details)

• Development of Aluminium Based Hybrid Metal Matrix Composites for Heavy Duty Applications, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.14, 2011
• M. Asif, K. Chandra, P.S. Misra
• Citations: 144 (Details)

• Recovery of Metals from Aluminum Dross and Saltcake, Journal of Minerals and Materials Characterization and Engineering, Vol.5 No.1, 2006
• J.Y. Hwang, X. Huang, Z. Xu
• Citations: 143 (Details)

• A Review on Detonation Gun Sprayed Coatings, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.3, 2012
• Lakhwinder Singh, Vikas Chawla, J.S. Grewal
• Citations: 140 (Details)

• Review of Green Polymer Nanocomposites, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.4, 2012
• Samson O. Adeosun, G. I. Lawal, Sambo A. Balogun, Emmanuel I. Akpan
• Citations: 138 (Details)

• Effect of Particulate Reinforcements on the Mechanical Properties of Al6061-WC and Al6061-Gr MMCs, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.12, 2011
• A. R. K. Swamy, A. Ramesha, G.B. Veeresh Kumar, J. N. Prakash
• Citations: 138 (Details)

• Characterisation and Corrosion-Erosion Behaviour of Carbide based Thermal Spray Coatings, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.6, 2012
• Sukhpal Singh Chatha, Hazoor S. Sidhu, Buta S. Sidhu
• Citations: 131 (Details)

• Synthesis and Characterization of Hydroxyapatite Powder by Eggshell, Journal of Minerals and Materials Characterization and Engineering, Vol.4 No.2, 2016
• Himanshu Khandelwal, Satya Prakash
• Citations: 120 (Details)

• Studies on Effects of Welding Parameters on the Mechanical Properties of Welded Low-Carbon Steel, Journal of Minerals and Materials Characterization and Engineering, Vol.3 No.3, 2015
• M. A. Bodude, I. Momohjimoh
• Citations: 115 (Details)

• Investigating the Effect of Chemical Treatment on the Constituents and Tensile Properties of Sisal Fibre, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.6, 2010
• I.O. Oladele, J.A. Omotoyinbo, J.O.T. Adewara
• Citations: 114 (Details)

• Mechanical Properties of Fly Ash Filled High Density Polyethylene, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.3, 2010
• Iftekhar Ahmad, Prakash A. Mahanwar
• Citations: 109 (Details)

• Effect of Heat Treatment Processes on the Mechanical Properties of Medium Carbon Steel, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.2, 2012
• T. Senthilkumar, T. K. Ajiboye
• Citations: 108 (Details)

• Sensitisation Study of Normalized 316L Stainless Steel, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.1, 2010
• P. Atanda, A. Fatudimu, O. Oluwole
• Citations: 106 (Details)

• EDM Studies on Aluminum Alloy-Silicon Carbide Composites Developed by Vortex Technique and Pressure Die Casting, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.1, 2010
• M. Kathiresan, T. Sornakumar
• Citations: 103 (Details)

• Review of Agro Waste Plastic Composites Production, Journal of Minerals and Materials Characterization and Engineering, Vol.1 No.5, 2013
• Hammajam Alhaji Abba, Ismarrubie Zahari Nur, Sapuan Mohd Salit
• Citations: 103 (Details)

• Effect of Hydrochloric Acid on the Structural of Sodic-Bentonite Clay, Journal of Minerals and Materials Characterization and Engineering, Vol.2 No.5, 2014
• Samira Bendou, Moussa Amrani
• Citations: 103 (Details)

• Kinetics of TL Glow Peak of Limestone from Patharia of CG Basin (India), Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.12, 2010
• Vikas Dubey, Suryanarayana N.S., Jagjeet Kaur
• Citations: 101 (Details)

• Novel Ultrasonic Dispersion of Carbon Nanotubes, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.3, 2010
• G.T. Caneba, C. Dutta, V. Agrawal, M. Rao
• Citations: 100 (Details)

• Effect of Particle Size of Filler on Properties of Nylon-6, Journal of Minerals and Materials Characterization and Engineering, Vol.3 No.1, 2004
• Suryasarathi Bose, P.A. Mahanwar
• Citations: 99 (Details)

• Unburned Carbon from Fly Ash for Mercury Adsorption: I. Separation and Characterization of Unburned Carbon, Journal of Minerals and Materials Characterization and Engineering, Vol.1 No.1, 2002
• J. Y. Hwang, X. Sun, Z. Li
• Citations: 98 (Details)

• Characterization of In-Plane Mechanical Properties of Laminated Hybrid Composites, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.2, 2010
• K. G. Satish, B. Siddeswarappa, K. Mohamed Kaleemulla
• Citations: 98 (Details)

• Effect of Fly Ash Content on Friction and Dry Sliding Wear Behavior of Glass Fiber Reinforced Polymer Composites - A Taguchi Approach, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.4, 2010
• S.R. Chauhan, Anoop Kumar, I. Singh, Prashant Kumar
• Citations: 98 (Details)

• Surface and Physicochemical Characterization of Phosphates Vivianite, Fe₂(PO₄)₃ and Hydroxyapatite, Ca₅(PO₄)₃OH, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.8, 2009
• D. Luna-Zaragoza, E. T. Romero-Guzmán, L. R. Reyes-Gutiérrez
• Citations: 97 (Details)

• Evaluation of Mechanical Properties of Medium Carbon Steel Quenched in Water and Oil, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.9, 2012
• J. K. Odusote, T. K. Ajiboye, A. B. Rabiu
• Citations: 97 (Details)

• Microwave-assisted wet chemical synthesis: advantages, significance, and steps to industrialization, Journal of Minerals and Materials Characterization and Engineering, Vol.2 No.2, 2003
• Shangzhao Shi, Jiann-Yang Hwang
• Citations: 96 (Details)

• Effect of Concentration of Mica on Properties of Polyester Thermoplastic Elastomer Composites, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.4, 2009
• M. S. Sreekanth, V. A. Bambole, S. T. Mhaske, P. A. Mahanwar
• Citations: 95 (Details)

• Adsorption and Thermodynamics Study of the Inhibition of Corrosion of Mild Steel In H₂SO₄ Medium Using Vernonia Amygdalina, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.9, 2012
• Joseph Tagbo Nwabanne, Vincent Nwoye Okafor
• Citations: 95 (Details)

• Sigma Phase Formation and Embrittlement of Cast Iron-Chromium-Nickel (Fe-Cr-Ni) Alloys, Journal of Minerals and Materials Characterization and Engineering, Vol.7 No.2, 2008
• A. M. Babakr, A. Al-Ahmari, K. Al-Jumayiah, F. Habiby
• Citations: 94 (Details)

• Sonochemical Coating of Ag-TiO₂ Nanoparticles on Textile Fabrics for Stain Repellency and Self-Cleaning- The Indian Scenario: A Review, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.6, 2010
• Subhranshu Sekhar Samal, P. Jeyaraman, Vinita Vishwakarma
• Citations: 94 (Details)

• Wear Behaviour of Al-SiCp Metal Matrix Composites and Optimization Using Taguchi Method and Grey Relational Analysis, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.11, 2012
• Shouvik Ghosh, Prasanta Sahoo, Goutam Sutradhar
• Citations: 91 (Details)

• Predicting Viscosity of Limestone–Water Slurry, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.3, 2009
• Pradipta Kumar Senapati, Dibakar Panda, Ashutosh Parida
• Citations: 89 (Details)

• Studies on Mechanical Characterization of Polypropylene/Na⁺-MMT Nanocomposites, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.8, 2010
• V. Selvakumar, K. Palanikumar, K. Palanivelu
• Citations: 88 (Details)

• Optimization of Friction and Wear Behaviour in Hybrid Metal Matrix Composites Using Taguchi Technique, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.8, 2012
• V. C. Uvaraja, N. Natarajan
• Citations: 88 (Details)

• A Review of Niobium-Tantalum Separation in Hydrometallurgy, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.3, 2011
• Olushola S. Ayanda, Folahan A. Adekola
• Citations: 85 (Details)

• Hot Corrosion & Erosion Problems in Coal Based Power Plants in India and Possible Solutions – A Review, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.4, 2011
• Vikas Chawla, Amita Chawla, D. Puri, S. Prakash, Prema G. Gurbuxani, Buta Singh Sidhu
• Citations: 85 (Details)

• Effect of Particle Size and Concentration of Flyash on Properties of Polyester Thermoplastic Elastomer Composites, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.3, 2009
• M.S. Sreekanth, V.A. Bambole, S.T. Mhaske, P.A. Mahanwar
• Citations: 85 (Details)

• Effect of Electrode Materials on Electric Discharge Machining of 316 L and 17 - 4 PH Stainless Steels, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.7, 2012
• Subramanian Gopalakannan, Thiagarajan Senthilvelan
• Citations: 84 (Details)

• Recent Trends in Producing Ultrafine Grained Steels, Journal of Minerals and Materials Characterization and Engineering, Vol.2 No.5, 2014
• Hossam Halfa
• Citations: 83 (Details)

• Characterization Of Graphite Particle Shape In Spheroidal Graphite Iron Using A Computer-Based Image Analyzer, Journal of Minerals and Materials Characterization and Engineering, Vol.3 No.1, 2004
• B. I. Imasogie, U. Wendt
• Citations: 82 (Details)

• Analysis of the Machining Characteristics on Surface Roughness of a Hybrid Aluminium Metal Matrix Composite (Al6061-SiC-Al₂O₃), Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.13, 2011
• T. Sasimurugan, K. Palanikumar
• Citations: 80 (Details)

• Growth and Characterisation of Nonlinear Optical Single Crystals of L-Alaninium Oxalate, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.8, 2009
• K. J. Arun, S. Jayalekshmi
• Citations: 79 (Details)

• Effects of Heat Treatment on the Mechanical Properties of Rolled Medium Carbon Steel, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.8, 2010
• O.O. Daramola, B.O. Adewuyi, I.O. Oladele
• Citations: 76 (Details)

• Effect of Fillers on Mechanical Properties and Fracture Toughness of Glass Fabric Reinforced Epoxy Composites, Journal of Minerals and Materials Characterization and Engineering, Vol.4 No.1, 2016
• Basappa Hulugappa, Mysuru V. Achutha, Bheemappa Suresha
• Citations: 75 (Details)

• Parametric Optimization of Gas Metal Arc Welding Processes by Using Factorial Design Approach, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.4, 2010
• Manoj Singla, Dharminder Singh, Dharmpal Deepak
• Citations: 73 (Details)

• Influence of Boron Additions on Mechanical Properties of Carbon Steel, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.10, 2012
• Saeed N. Ghali, Hoda S. El-Faramawy, Mamdouh M. Eissa
• Citations: 73 (Details)

• Optical Conductivity and Dielectric Response of an Organic Aminopyridine NLO Single Crystal, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.13, 2011
• T. Arumanayagam, P. Murugakoothan
• Citations: 71 (Details)

• Effective Beneficiation of Low Grade Iron Ore Through Jigging Operation, Journal of Minerals and Materials Characterization and Engineering, Vol.7 No.1, 2008
• B. Das, S. Prakash, S.K. Das, P.S.R. Reddy
• Citations: 70 (Details)

• Duplex Stainless Steel Welds and their Susceptibility to Intergranular Corrosion, Journal of Minerals and Materials Characterization and Engineering, Vol.7 No.3, 2008
• B. Gideon, L. Ward, G. Biddle
• Citations: 70 (Details)

• Comparison of the Mechanical Properties of AL6061/Albite and AL6061/Graphite Metal Matrix Composites, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.2, 2009
• A. Ramesh, J. N. Prakash, A. S. Shiva Shankare Gowda, Sonnappa Appaiah
• Citations: 68 (Details)

• Recycling Practices of Spent MgO-C Refractories, Journal of Minerals and Materials Characterization and Engineering, Vol.1 No.2, 2002
• Kyei-Sing Kwong, James P. Bennett
• Citations: 68 (Details)

• Studies of The Mechanism of Polyvinyl Alcohol Adsorption on The Calcite/Water Interface in The Presence of Sodium Oleate, Journal of Minerals and Materials Characterization and Engineering, Vol.7 No.2, 2008
• N.S. LABIDI, A. DJEBAILI
• Citations: 66 (Details)

• Influence of SiO₂ Fillers on Sliding Wear Resistance and Mechanical Properties of Compression Moulded Glass Epoxy Composites, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.7, 2009
• B. Shivamurthy,   Siddaramaiah, M.S. Prabhuswamyc
• Citations: 66 (Details)

• Experimental Investigation of Woven E-Glass Epoxy Composite Laminates Subjected to Low-Velocity Impact at Different Energy Levels, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.7, 2010
• N. Rajesh Mathivanan, J. Jerald
• Citations: 65 (Details)

• Potentiality of Clay Raw Materials from Northern Morocco in Ceramic Industry: Tetouan and Meknes Areas, Journal of Minerals and Materials Characterization and Engineering, Vol.2 No.3, 2014
• M. El Ouahabi, L. Daoudi, F. De Vleeschouwer, R. Bindler, N. Fagel
• Citations: 65 (Details)

• Hydrometallurgical Processing of Manganese Ores: A Review, Journal of Minerals and Materials Characterization and Engineering, Vol.2 No.3, 2014
• Alafara A. Baba, Lateef Ibrahim, Folahan A. Adekola, Rafiu B. Bale, Malay K. Ghosh, Abdul R. Sheik, Sangita R. Pradhan, Olushola S. Ayanda, Ismail O. Folorunsho
• Citations: 65 (Details)

• Chemical Leaching of Low Rank Coal and its Characterization using SEM/EDAX and FTIR, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.10, 2009
• B. Manoj, A.G. Kunjomana, K.A. Chandrasekharan
• Citations: 64 (Details)

• Production and Characterization of Porous Insulating Fired Bricks from Ifon Clay with Varied Sawdust Admixture, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.10, 2012
• Fatai Olufemi Aramide
• Citations: 63 (Details)

• Sol-Gel-Derived Porous Silica: Economic Synthesis and Characterization, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.10, 2012
• Enobong R. Essien, Oluyemi A. Olaniyi, Luqman A. Adams, Rafiu O. Shaibu
• Citations: 63 (Details)

• Forgeability and Machinability of Stir Cast Aluminum Alloy Metal Matrix Composites, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.10, 2011
• Rabindra Behera, S. Das, D. Chatterjee, G. Sutradhar
• Citations: 62 (Details)

• Gold in the Jinya Carlin-type Deposit: Characterization and Implications, Journal of Minerals and Materials Characterization and Engineering, Vol.2 No.2, 2003
• Youqin(Joe) Zhou, Kuiren Wang
• Citations: 61 (Details)

• XPS & FTIR Study of Adsorption Characteristics Using Cationic and Anionic Collectors on Smithsonite, Journal of Minerals and Materials Characterization and Engineering, Vol.5 No.1, 2006
• Hosseini S. Hamid, Forssberg Eric
• Citations: 61 (Details)

• Processed Low NO_x Fly Ash as a Filler in Plastics, Journal of Minerals and Materials Characterization and Engineering, Vol.2 No.1, 2003
• X. Huang, J.Y. Hwang, J.M. Gillis
• Citations: 60 (Details)

• Polyetheretherketone (PEEK) Composites Reinforced with Fly Ash and Mica, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.1, 2010
• M. Rahail Parvaiz, Smita Mohanty, Sanjay K. Nayak, P. A. Mahanwar
• Citations: 60 (Details)

• Fabrication and Characterizations of Mechanical Properties of Al-4.5%Cu/10TiC Composite by In-situ Method, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.11, 2012
• Anand Kumar, Manas Mohan Mahapatra, Pradeep Kumar Jha
• Citations: 59 (Details)

• Use of Mineral Liberation Analysis (MLA) in the Characterization of Lithium-Bearing Micas, Journal of Minerals and Materials Characterization and Engineering, Vol.1 No.6, 2013
• Dirk Sandmann, Jens Gutzmer
• Citations: 59 (Details)

• Investigations on Mechanical and Tribological Behaviour of Particulate Filled Glass Fabric Reinforced Epoxy Composites, Journal of Minerals and Materials Characterization and Engineering, Vol.1 No.4, 2013
• Bhadrabasol Revappa Raju, Bheemappa Suresha, Ragera Parameshwarappa Swamy, Bannangadi Swamy Gowda Kanthraju
• Citations: 58 (Details)

• Development of Iron Based Brake Friction Material by Hot Powder Preform Forging Technique used for Medium to Heavy Duty Applications, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.3, 2011
• Mohammad Asif, K. Chandra, P.S. Misra
• Citations: 56 (Details)

• Recovery of Ilmenite and Other Heavy Minerals from Teri Sands (Red Sands) of Tamil Nadu, India, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.2, 2009
• N. Babu, N. Vasumathi, R. Bhima Rao
• Citations: 56 (Details)

• Mineralogy and Geochemistry of A Low Grade Iron Ore Sample from Bellary-Hospet Sector, India and Their Implications on Beneficiation, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.2, 2009
• D. S. Rao, T. V. Vijaya Kumar, S. Subba Rao, S. Prabhakar, G. Bhaskar Raju
• Citations: 56 (Details)

• Effect of In-Situ TiB₂ Particle Addition on the Mechanical Properties of AA 2219 Al Alloy Composite, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.6, 2011
• N.R. Rajasekaran, V. Sampath
• Citations: 54 (Details)

• Optimum Calcium Carbonate Filler Concentration for Flexible Polyurethane Foam Composite, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.3, 2012
• M. A. Usman, S. O. Adeosun, G. O. Osifeso
• Citations: 54 (Details)

• Investigation on Two-Body Abrasive Wear Behavior of Silicon Carbide Filled Glass Fabric-Epoxy Composites, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.3, 2010
• N. Mohan, S. Natarajan, S.P. KumareshBabu,   Siddaramaiah
• Citations: 53 (Details)

• Unburned Carbon from Fly Ash for Mercury Adsorption: II. Adsorption Isotherms and Mechanisms, Journal of Minerals and Materials Characterization and Engineering, Vol.1 No.2, 2002
• Z. Li, X. Sun, J. Luo, J. Y. Hwang
• Citations: 53 (Details)

• Optimization of Gas Metal Arc Welding Process Parameters Using Standard Deviation (SDV) and Multi-Objective Optimization on the Basis of Ratio Analysis (MOORA), Journal of Minerals and Materials Characterization and Engineering, Vol.3 No.4, 2015
• Joseph Achebo, William Ejenavi Odinikuku
• Citations: 53 (Details)

• Leaching of Sphalerite with Hydrogen Peroxide and Nitric Acid, Journal of Minerals and Materials Characterization and Engineering, Vol.5 No.2, 2006
• A.O. Adebayo, K.O. Ipinmoroti, O.O. Ajayi
• Citations: 52 (Details)

• Analysis of Tool Wear Rate in Drilling Operation using Scanning Electron Microscope (SEM), Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.1, 2012
• Anil Jindal
• Citations: 52 (Details)

• Parametric Optimization of PMEDM Process using Chromium Powder Mixed Dielectric and Triangular Shape Electrodes, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.11, 2011
• Kuldeep Ojha, R. K. Garg, K. K. Singh
• Citations: 51 (Details)

• Effects of Palm Kernel Shell on the Microstructure and Mechanical Properties of Recycled Polyethylene/Palm Kernel Shell Particulate Composites, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.8, 2012
• Agunsoye J. Olumuyiwa, Talabi S. Isaac, Obe A. Adewunmi, Adamson I. Ololade
• Citations: 51 (Details)

• Working Properties of Some Selected Refractory Clay Deposits in South Western Nigeria, Journal of Minerals and Materials Characterization and Engineering, Vol.7 No.3, 2008
• J.A. Omotoyinbo, O.O. Oluwole
• Citations: 51 (Details)

• Coag-Flocculation Kinetics and Functional Parameters Response of Mucuna Seed Coagulant to pH Variation in Organic Rich Coal Effluent Medium, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.2, 2010
• M.C. Menkiti, P.C. Nnaji, C.I. Nwoye, O.D. Onukwuli
• Citations: 51 (Details)

• Upgradation of Low-Grade Siliceous Manganese Ore from Bonai-Keonjhar Belt, Orissa, India, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.1, 2009
• P.P. Mishra, B.K. Mohapatra, K. Mahanta
• Citations: 50 (Details)

• Characterization of Chromium in Contaminated Soil Studied by SEM, EDS,XRD and Mossbauer Spectroscopy, Journal of Minerals and Materials Characterization and Engineering, Vol.7 No.1, 2008
• L. R. Reyes-Gutiérrez, E. T. Romero-Guzmán, A. Cabral-Prieto, R. Rodríguez-Castillo
• Citations: 50 (Details)

• Preparation & Characterization of Al-5083 Alloy Composites, Journal of Minerals and Materials Characterization and Engineering, Vol.1 No.1, 2013
• Sourabh Gargatte, Rahul R. Upadhye, Venkatesh S. Dandagi, Srikanth R. Desai, Bhimappa S. Waghamode
• Citations: 50 (Details)

• Dry Sliding Wear Behaviour of SiC Particles Reinforced Zinc-Aluminium (ZA43) Alloy Metal Matrix Composites, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.5, 2011
• Rajaneesh N. Marigoudar, Kanakuppi Sadashivappa
• Citations: 49 (Details)

• Effect of Groundnut Shell Powder on the Mechanical Properties of Recycled Polyethylene and Its Biodegradability, Journal of Minerals and Materials Characterization and Engineering, Vol.4 No.3, 2016
• Mohammed Awwalu Usman, Ibrahim Momohjimoh, Abdulahi S. B. Gimba
• Citations: 49 (Details)

• Annealing Heat Treatment Effects on Steel Welds, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.6, 2010
• A.V. Adedayo, S.A. Ibitoye, O.A. Oyetoyan
• Citations: 47 (Details)

• Effect of Silicon Additions on the Wear Properties of Grey Cast Iron, Journal of Minerals and Materials Characterization and Engineering, Vol.1 No.2, 2013
• Johnson O. Agunsoye, Talabi S. Isaac, Olumuyiwa I. Awe, Afemefuna T. Onwuegbuzie
• Citations: 47 (Details)

• Physico-Chemical Characterization of Akoko Mined Kaolin Clay, Journal of Minerals and Materials Characterization and Engineering, Vol.3 No.5, 2015
• Abimbola George Olaremu
• Citations: 46 (Details)

• Characterization of Solid Wastes from Aluminum Tertiary Sector: The Current State of Spanish Industry, Journal of Minerals and Materials Characterization and Engineering, Vol.3 No.2, 2015
• Roberto Galindo, Isabel Padilla, Olga Rodríguez, Ruth Sánchez-Hernández, Sol López-Andrés, Aurora López-Delgado
• Citations: 46 (Details)

• Hot Corrosion Behavior of Superalloy in Different Corrosive Environments, Journal of Minerals and Materials Characterization and Engineering, Vol.3 No.1, 2015
• Subhash Kamal, Korada Viswanath Sharma, A. M. Abdul-Rani
• Citations: 45 (Details)

• Microstructure and Shape Memory Effect of Cu-Zn-Ni Shape Memory Alloys, Journal of Minerals and Materials Characterization and Engineering, Vol.2 No.2, 2014
• Sathish S, U. S. Mallik, T. N. Raju
• Citations: 45 (Details)

• Comparative Study of the Kinetics of Dissolution of Laterite in some Acidic Media, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.15, 2011
• Olushola S. AYANDA, Folahan A. ADEKOLA, Alafara A. BABA, Olalekan S. FATOKI, Bhekumusa J. XIMBA
• Citations: 45 (Details)

• Characterisation and Pre-concentration of Chromite Values from Plant Tailings Using Floatex Density Separator, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.5, 2009
• C. Raghu Kumar, Sunil Tripathy, D.S. Rao
• Citations: 45 (Details)

• Evaluation for the Beneficiability of White Silica Sands from the Overburden of Lignite Mine situated in Rajpardi district of Gujarat, India, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.9, 2009
• M. Sundararajan, S. Ramaswamy, P. Raghavan
• Citations: 45 (Details)

• Effects of Tin on Aluminum–Zinc–Magnesium Alloy as Sacrificial Anode in Seawater, Journal of Minerals and Materials Characterization and Engineering, Vol.7 No.2, 2008
• L.E. Umoru, O.O. Ige
• Citations: 45 (Details)

• Investigation of the Quenching Properties of Selected Media on 6061 Aluminum Alloy, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.4, 2009
• O. K. Abubakre, U. P. Mamaki, R. A Muriana
• Citations: 45 (Details)

• Some Studies on Wear and Corrosion Properties of Al5083/Al₂O₃/Graphite Hybrid Composites, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.7, 2012
• V. N. Gaitonde, S. R. Karnik, M. S. Jayaprakash
• Citations: 44 (Details)

• Dry Sliding Wear Behaviour of Aluminium/Be₃Al₂(SiO₃)₆ Composite Using Taguchi Method, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.7, 2012
• H. B. Bhaskar, Abdul Sharief
• Citations: 44 (Details)

• Recovery of Iron Ore Tailings byColumn Flotation, Journal of Minerals and Materials Characterization and Engineering, Vol.1 No.5, 2013
• Plinio Eduardo Praes, Rodrigo Oscar de Albuquerque, Antonio Furquim Oliveira Luz
• Citations: 44 (Details)

• The Effect of Copper Addition on the Mechanical and Wear Properties of Grey Cast Iron, Journal of Minerals and Materials Characterization and Engineering, Vol.2 No.5, 2014
• J. O. Agunsoye, S. A. Bello, S. B. Hassan, R. G. Adeyemo, J. M. Odii
• Citations: 44 (Details)

• Thermodynamics of the Reduction Roasting of Nickeliferous Laterite Ores, Journal of Minerals and Materials Characterization and Engineering, Vol.4 No.6, 2016
• R. Elliott, C. A. Pickles, J. Forster
• Citations: 44 (Details)

• Quantitative Determination of Metallic Iron Content in Steel-Making Slag, Journal of Minerals and Materials Characterization and Engineering, Vol.2 No.1, 2003
• Zhiyong Xu, Jim Hwang, Robert Greenlund, Xiaodi Huang, Jinjing Luo, Steve Anschuetz
• Citations: 43 (Details)

• Assessment Of Beneficiation Routes Of Tantalite Ores From Key Locations In Nigeria, Journal of Minerals and Materials Characterization and Engineering, Vol.4 No.2, 2005
• A. R Adetunji, W.O. Siyanbola, I. I Funtua, S. O. O. Olusunle, A.A Afonja, O.O. Adewoye
• Citations: 42 (Details)

• Challenges of Producing Quality Construction Steel Bars in West Africa:Case Study of Nigeria Steel Industry, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.4, 2009
• Sanmbo Balogun, David Esezobor, Samson Adeosun, Olatunde Sekunowo
• Citations: 42 (Details)

• Bio-Chemical Analysis and FTIR-Spectral Studies of Artificially Removed Renal Stone Mineral Constituents, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.2, 2009
• G. Kanchana, P. Sundaramoorthi, G.P. Jeyanthi
• Citations: 42 (Details)

• Effect of Melting Temperature on the Wear Characteristics of Austenitic Manganese Steel, Journal of Minerals and Materials Characterization and Engineering, Vol.7 No.3, 2008
• S.A. Balogun, D.E. Esezobor, J.O. Agunsoye
• Citations: 42 (Details)

• The Development of Mathematical Model for the Prediction of Ageing Behaviour for Al-Cu-Mg/Bagasse Ash Particulate Composites, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.10, 2010
• V.S. Aigbodion, S.B. Hassan, E.T. Dauda, R.A. Mohammed
• Citations: 42 (Details)

• Recovery of Chromite Values from Plant Tailings by Gravity Concentration, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.1, 2011
• Sunil Kumar Tripathy, Y. Ramamurthy, Veerendra Singh
• Citations: 42 (Details)

• Effect of Surface Treatment and Fiber Orientation on the Tensile and Morphological Properties of Banana Stem Fiber Reinforced Natural Rubber Composite, Journal of Minerals and Materials Characterization and Engineering, Vol.2 No.3, 2014
• Ikechukwu Christian Ezema, A. R. Ravindranatha Menon, Camelus Sunday Obayi, Augustin Dinobi Omah
• Citations: 42 (Details)

• Characterization of LDPE Reinforced with Calcium Carbonate—Fly Ash Hybrid Filler, Journal of Minerals and Materials Characterization and Engineering, Vol.2 No.4, 2014
• Samson Oluropo Adeosun, Mohammed Awwalu Usman, Emmanuel Isaac Akpan, Winifred Ifeoma Dibie
• Citations: 42 (Details)

• Effect of Titanium Addition on Behavior of Medium Carbon Steel, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.11, 2012
• Hoda S. El-Faramawy, Saeed N. Ghali, Mamdouh M. Eissa
• Citations: 42 (Details)

• Structural, Electrical and Optical Characterization Studies on Glycine Picrate Single Crystal : A Third Order Nonlinear Optical Material, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.10, 2009
• T. Uma Devi, N. Lawrence, R. Ramesh Babu, K. Ramamurthi, G. Bhagavannarayana
• Citations: 41 (Details)

• Dissolution Kinetics and Leaching of Rutile Ore in Hydrochloric Acid, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.10, 2009
• Alafara A. Baba, Folahan A. Adekola, Emmanuela E. Toye, Rafiu B. Bale
• Citations: 41 (Details)

• Characterization and Beneficiation of Anka Chromite Ore Using Magnetic Separation Process, Journal of Minerals and Materials Characterization and Engineering, Vol.6 No.2, 2007
• O.K. Abubakre, R.A. Muriana, P.N. Nwokike
• Citations: 41 (Details)

• Effects of Anodizing Parameters in Tartaric-Sulphuric Acid on Coating Thickness and Corrosion Resistance of Al 2024 T3 Alloy, Journal of Minerals and Materials Characterization and Engineering, Vol.3 No.3, 2015
• Mohammad Zaki Mubarok,   Wahab,   Sutarno, Soleh Wahyudi
• Citations: 41 (Details)

• Effect of Heat Treatments on Corrosion of Welded Low-Carbon Steel in Acid and Salt Environments, Journal of Minerals and Materials Characterization and Engineering, Vol.1 No.3, 2013
• Saliu Ojo Seidu, Bolarinwa Johnson Kutelu
• Citations: 40 (Details)

• Microstructure and Mechanical Properties of as Cast Aluminium Alloy 7075/Basalt Dispersed Metal Matrix Composites, Journal of Minerals and Materials Characterization and Engineering, Vol.2 No.3, 2014
• S. Ezhil Vannan, S. Paul Vizhian
• Citations: 40 (Details)

• High Temperature Cyclic Oxidation Behavior of Ni and Co Based Superalloys, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.3, 2012
• Deepa Mudgal, Surendra Singh, Satya Prakash
• Citations: 40 (Details)

• Characterization of Ceramic Filled Polymer Matrix Composite Used for Biomedical Applications, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.12, 2011
• Waleed Asim Hanna, Faiza E. Gharib, Ismail Ibrahim Marhoon
• Citations: 40 (Details)

• Effect of Aqueous Extracts of Bitter Leaf Powder on the Corrosion Inhibition of Al-Si Alloy in 0.5 M Caustic Soda Solution, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.7, 2012
• F. A. Ayeni, I. A. Madugu, P. Sukop, A. P. Ihom, O. O. Alabi, R. Okara, M. Abdulwahab
• Citations: 38 (Details)

• Study of Changes to the Organic Functional Groups of a High Volatile Bituminous Coal during Organic Acid Treatment Process by FTIR Spectroscopy, Journal of Minerals and Materials Characterization and Engineering, Vol.1 No.2, 2013
• B. Manoj, Ponni Narayanan
• Citations: 38 (Details)

• Effectiveness Of Gravity Concentration For The Beneficiation Of Itakpe (Nigeria) Iron Ore Achieved Through Jigging Operation., Journal of Minerals and Materials Characterization and Engineering, Vol.4 No.1, 2005
• P. A. OLUBAMBI, J. H. POTGIETER
• Citations: 38 (Details)

• Development of Fibre Reinforced Cementitious Composite for Ceiling Application, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.8, 2009
• I.O. Oladele, A.D. Akinwekomi, S. Aribo, A.K. Aladenika
• Citations: 38 (Details)

• Effect of Deformation on the Mechanical and Electrical Properties of Aluminum-Magnesium Alloy, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.6, 2011
• S. O. Adeosun, O. I. Sekunowo, S.A. Balogun, L.O. Osoba
• Citations: 38 (Details)

• Review of GTAW Welding Parameters, Journal of Minerals and Materials Characterization and Engineering, Vol.6 No.5, 2018
• Bolarinwa Johnson Kutelu, Saliu Ojo Seidu, Godwin Idenala Eghabor, Ayotunde Idris Ibitoye
• Citations: 38 (Details)

• Comparative Study of Thermal Comfort Induced from Masonry Made of Stabilized Compressed Earth Block vs Conventional Cementitious Material, Journal of Minerals and Materials Characterization and Engineering, Vol.7 No.6, 2019
• Hassane Seini Moussa, Philbert Nshimiyimana, Césaire Hema, Ousmane Zoungrana, Adamah Messan, Luc Courard
• Citations: 37 (Details)

• Comparative Studies on Microstructure and Mechanical Properties of Granulated Blast Furnace Slag and Fly Ash Reinforced AA 2024 Composites, Journal of Minerals and Materials Characterization and Engineering, Vol.2 No.4, 2014
• Inampudi Narasimha Murthy, Nallabelli Arun Babu, Jinugu Babu Rao
• Citations: 37 (Details)

• Oxidation Behavior of Nanostructured TiAlN and AlCrN Thin Coatings on ASTM-SA213-T-22 Boiler Steel, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.11, 2010
• Vikas Chawla, Amita Chawla, Buta Singh Sidhu, S. Prakash, D. Puri
• Citations: 37 (Details)

• Role of Temperature and Carbon Nanotube Reinforcement on Epoxy based Nanocomposites, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.1, 2009
• Subhranshu Sekhar Samal
• Citations: 37 (Details)

• Significance of Impurity Mineral Identification in the Value Addition of Kaolin – A Case Study with Reference to an Acidic Kaolin from India, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.11, 2011
• S. Ramaswamy, P. Raghavan
• Citations: 37 (Details)

• Effects of Steel Fibers and Iron Filings on Thermal and Mechanical Properties of Concrete for Energy Storage Application, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.15, 2011
• A.A. Adeyanju, K. Manohar
• Citations: 36 (Details)

• Effect of Secondary Processing and Nanoscale Reinforcement on the Mechanical Properties of Al-TiC Composites, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.14, 2011
• V. Senthilkumar, A. Balaji, Hafeez Ahamed
• Citations: 36 (Details)

• On the Comparison of Microstructure Characteristics and Mechanical Properties of High Chromium White Iron with the Hadfield Austenitic Manganese Steel, Journal of Minerals and Materials Characterization and Engineering, Vol.1 No.1, 2013
• Johnson O. Agunsoye, Talabi S. Isaac, Agbeleye A. Abiona
• Citations: 36 (Details)

• Hardening Characteristics of Plain Carbon Steel and Ductile Cast Iron Using Neem Oil as Quenchant, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.2, 2011
• S. B. Hassan, J.B. Agboola, V.S. Aigbodion, E.J. Williams
• Citations: 36 (Details)

• Characterization of Peanut Shells for Their Valorization in Earth Brick, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.4, 2020
• Ouanmini Bobet, Sory Nassio, Mohamed Seynou, Bakiono Remy, Lamine Zerbo, Issiaka Sanou, Moustapha Sawadogo, Younoussa Millogo, Escadeillas Gilles
• Citations: 36 (Details)

• Corrosion Study of AISI 304, AISI 321 and AISI 430 Stainless Steels in a Tar Sand Digester, Journal of Minerals and Materials Characterization and Engineering, Vol.7 No.4, 2008
• L.E. Umoru, A.A. Afonja, B. Ademodi
• Citations: 35 (Details)

• Effects of Pressure on the Mechanical Properties and Microstructure of Die Cast Aluminum A380 Alloy, Journal of Minerals and Materials Characterization and Engineering, Vol.2 No.3, 2014
• Kenneth N. Obiekea, Shekarau Y. Aku, Danjuma S. Yawas
• Citations: 35 (Details)

• Fracture Toughness of Glass-Carbon (0/90)_s Fiber Reinforced Polymer Composite – An Experimental and Numerical Study, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.8, 2011
• P.S. Shivakumar Gouda, S.K. Kudari, S. Prabhuswamy, Dayananda Jawali
• Citations: 35 (Details)

• Thermal Sprayed CNT Reinforced Nanocomposite Coatings – A Review, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.8, 2011
• Manoj Kumar Singla, Harpreet Singh, Vikas Chawla
• Citations: 34 (Details)

• Machinability Study of Al-5Cu-TiB₂ In-situ Metal Matrix Composites Fabricated by Flux-assisted Synthesis, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.13, 2011
• A. Mahamani
• Citations: 34 (Details)

• Taguchi Technique for the Simultaneous Optimization of Tribological Parameters in Metal Matrix Composite, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.12, 2011
• Kumar.T.R. Hemanth, R.P. Swamy, T.K. Chandrashekar
• Citations: 34 (Details)

• Characteristics of Biodegradable Implants, Journal of Minerals and Materials Characterization and Engineering, Vol.2 No.2, 2014
• Samson Oluropo Adeosun, Ganiyu Ishola Lawal, Oluwashina Philips Gbenebor
• Citations: 34 (Details)

• A Study on Gold(III) Recovery Via Foam Separation with Nonionic Surfactant in Batch Mode, Journal of Minerals and Materials Characterization and Engineering, Vol.2 No.2, 2003
• T. Kinoshita, S. Akita, S. Ozawa, S. Nii, F. Kawaizumi, K. Takahashi
• Citations: 34 (Details)

• Removal of Cu²⁺ from Aqueous Solution using Fly Ash, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.6, 2011
• Jinjing Luo, Huazhen Shen, Hanna Markström, Zhongye Wang, Qiang Niu
• Citations: 34 (Details)

• Morphological, Mechanical, Thermal, Electrical and Rheological Properties of Polycarbonate Composites Reinforced with Surfaces Modified Mica, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.11, 2010
• M. Rahail Parvaiz, P. A. Mahanwar, Smita Mohanty, Sanjay K. Nayak
• Citations: 34 (Details)

• Effect of Particle Size and Concentration on Mechanical and Electrical Properties of the Mica Filled PVC, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.9, 2010
• S.P. Deshmukh, A.C. Rao, V. R. Gaval, Seena Joseph, P.A. Mahanwar
• Citations: 34 (Details)

• Improving the Construction Industry Quality Using the Seven Basic Quality Control Tools, Journal of Minerals and Materials Characterization and Engineering, Vol.7 No.6, 2019
• Mohamed Abdel-Hamid, Hanaa Mohamed Abdelhaleem
• Citations: 34 (Details)

• Effects of Additives on Some Selected Properties of Base Sand, Journal of Minerals and Materials Characterization and Engineering, Vol.2 No.5, 2014
• Saliu Ojo Seidu, Bolarinwa Johnson Kutelu
• Citations: 33 (Details)

• Characterization and Modification of a Clay Mineral Used in Adsorption Tests, Journal of Minerals and Materials Characterization and Engineering, Vol.3 No.4, 2015
• Natália Costa Dias, Patrícia Arns Steiner, Maria Cristina Borba Braga
• Citations: 33 (Details)

• Image Analaysis Coupled With A SEM-EDS Applied To The Characaterization Of A Zn-Pb Partially Weathered Ore, Journal of Minerals and Materials Characterization and Engineering, Vol.1 No.1, 2002
• Henrique Kahn, Eliana S.Mano Mano, Maria Manuela M. L. Tassinari
• Citations: 33 (Details)

• A New Application For Flotation Of Oxidized Copper Ore, Journal of Minerals and Materials Characterization and Engineering, Vol.4 No.2, 2005
• Recep Ziyadanogullari, Firat Aydin
• Citations: 33 (Details)

• A Novel Process For Recovery Of Te And Se From Copper Slimes Autoclave Leach Solution, Journal of Minerals and Materials Characterization and Engineering, Vol.2 No.1, 2003
• Shijie Wang, Brad Wesstrom, Jean Fernandez
• Citations: 32 (Details)

• Continuous Recovery of Gold(III) via Foam Separation with Nonionic Surfactant, Journal of Minerals and Materials Characterization and Engineering, Vol.3 No.1, 2004
• T. Kinoshita, S. Akita, S. Ozawa, S. Nii, F. Kawaizumi, K. Takahashi
• Citations: 32 (Details)

• Investigation of Dissolution Kinetics of A Nigerian Tantalite Ore in Nitric Acid, Journal of Minerals and Materials Characterization and Engineering, Vol.7 No.1, 2008
• A. A. Baba, F. A. Adekola, O. I. Dele-Ige, R. B. Bale
• Citations: 32 (Details)

• Effects of Heat Treatment on Strength and Ductility of Rolled and Forged Aluminum 6063 Alloy, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.8, 2010
• S. O. Adeosun, S.A. Balogun, O.I. Sekunowo, M.A. Usman
• Citations: 32 (Details)

• Microstructure and Mechanical Properties of Ceramic Composites, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.6, 2010
• V.S. Aigbodion, J. O. Agunsoye, V. Kalu, F. Asuke, S. Ola
• Citations: 32 (Details)

• Effects of Gas Metal Arc Welding Techniques on the Mechanical Properties of Duplex Stainless Steel, Journal of Minerals and Materials Characterization and Engineering, Vol.1 No.5, 2013
• Tanimu Ibrahim, Danjuma S. Yawas, Shekarau Y. Aku
• Citations: 32 (Details)

• Production of Refractory Lining for Diesel Fired Rotary Furnace, from Locally Sourced Kaolin and Potter’s Clay, Journal of Minerals and Materials Characterization and Engineering, Vol.1 No.3, 2013
• Fatai Olufemi Aramide, Saliu Ojo Seidu
• Citations: 32 (Details)

• Optimization of ECM Process Parameters Using NSGA-II, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.10, 2012
• Chinnamuthu Senthilkumar, Gowrishankar Ganesan, Ramanujam Karthikeyan
• Citations: 32 (Details)

• Thermal Cycling Effects on the Fatigue Behaviour of Low Carbon Steel, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.14, 2011
• Segun Afokhainu Agbadua, Chinedum Ogonna Mgbemena, Chika Edith Mgbemena, Lazarus Onyebuchi Chima
• Citations: 32 (Details)

• Effect of Copper and Silicon Carbide Content on the Corrosion Resistance of Al-Mg Alloys in Acidic and Alkaline Solutions, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.4, 2012
• Ahmad T. Mayyas, Mohammad M. Hamasha, Abdalla Alrashdan, Adel M. Hassan, Mohammed T. Hayajneh
• Citations: 32 (Details)

• Potentials of Maize Stalk Ash as Reinforcement in Polyster Composites, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.4, 2012
• S.B. Hassan, E.J. Oghenevweta, V.S. Aigbodion
• Citations: 32 (Details)

• Effect of Particulate Reinforcement on the Mechanical Properties of Al2024-WC MMCs, Journal of Minerals and Materials Characterization and Engineering, Vol.3 No.6, 2015
• K. Punith Gowda, J. N. Prakash, Shivashankare Gowda, B. Satish Babu
• Citations: 32 (Details)

• Comparative Analysis of Rigid PVC Foam Reinforced with Class C and Class F Fly Ash, Journal of Minerals and Materials Characterization and Engineering, Vol.2 No.6, 2014
• Parisa Khoshnoud, Subhashini Gunashekar, Murtatha M. Jamel, Nidal Abu-Zahra
• Citations: 32 (Details)

• Thermal Conductivity Enhancement of Epoxy by Hybrid Particulate Fillers of Graphite and Silicon Carbide, Journal of Minerals and Materials Characterization and Engineering, Vol.3 No.2, 2015
• Krishnamachar Srinivas, Mysore Siddalingappa Bhagyashekar
• Citations: 32 (Details)

• Evaluation of Mechanical and Microstructural Properties of α-Brass Alloy Produced from Scrap Copper and Zinc Metal through Sand Casting Process, Journal of Minerals and Materials Characterization and Engineering, Vol.5 No.1, 2017
• Edward E. Igelegbai, Oluwaseun A. Alo, Adefemi O. Adeodu, Ilesanmi A. Daniyan
• Citations: 31 (Details)

• Growth, Thermal, Mechanical and Dielectric Studies of Glycine Doped Potassium Acid Phthalate Single Crystals, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.9, 2011
• T. Baraniraj, P. Philominathan
• Citations: 31 (Details)

• Synthesis and Structural Characterization of Xanthate (KEX) in Sight of Their Utilization in the Processe s of Sulphides Flotation, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.6, 2009
• Nedjar. Zohir, Bouhenguel. Mustapha, Djebaili Abd Elbaki
• Citations: 31 (Details)

• Structural Investigation of Chemical Treated Polyester Fibers Using Saxs and Other Techniques, Journal of Minerals and Materials Characterization and Engineering, Vol.5 No.2, 2006
• S. Bal, R.C. Behera
• Citations: 31 (Details)

• The Influence of Agitation Speed on the Morphology and Size Particle Synthesis of Zr(HPO₄)₂·H₂O from Mexican Sand, Journal of Minerals and Materials Characterization and Engineering, Vol.6 No.1, 2007
• Garcia Rosales Genoveva, Ordónez Regil Enrique, Romero Guzmán Elizabeth Teresita, Ordónez Regil Eduardo
• Citations: 31 (Details)

• Effects Of Microwave On Molten Metals With Low Melting Temperatures, Journal of Minerals and Materials Characterization and Engineering, Vol.4 No.2, 2005
• Xiang Sun, Jiann-Yang Hwang, Xiaodi Huang, Bowen Li, Shangzhao Shi
• Citations: 30 (Details)

• Cathodoluminescence (CL) Microscopy Application to Refractories and Slags, Journal of Minerals and Materials Characterization and Engineering, Vol.1 No.1, 2002
• Musa Karakus, Robert E. Moore
• Citations: 30 (Details)

• Beneficiation of Synthetic Iron Ore Kaolinite Mixture Using Selective Flocculation, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.11, 2010
• Lopamudra Panda, S.K. Biswal, Vilas Tathavadkar
• Citations: 30 (Details)

• Growth and Characterization of Guanidinium Trifluoroacetate – Second Harmonic Generation from a Centrosymmetric Crystal, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.9, 2011
• M. Loganayaki, V. Siva Shankar, P. Ramesh, M.N. Ponnuswamy, P. Murugakoothan
• Citations: 30 (Details)

• Effect of Cenosphere Concentration on the Mechanical, Thermal, Rheological and Morphological Properties of Nylon 6, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.8, 2012
• P. A. Wasekar, P. G. Kadam, S. T. Mhaske
• Citations: 30 (Details)

• Preparation of Nano-TiO₂ Thin Film Using Spin Coating Method, Journal of Minerals and Materials Characterization and Engineering, Vol.1 No.4, 2013
• Ayodele Abeeb Daniyan, Lasisi Ejibunu Umoru, Bankole Olunlade
• Citations: 30 (Details)

• Thermodynamic Calculation for Silicon ModifiedAISI M2 High Speed Tool Steel, Journal of Minerals and Materials Characterization and Engineering, Vol.1 No.5, 2013
• Hossam Halfa
• Citations: 30 (Details)

• Adsorption and Post Adsorption Behavior of Schwertmannite with Various Oxyanions, Journal of Minerals and Materials Characterization and Engineering, Vol.5 No.2, 2017
• Khandala Khamphila, Ritsu Kodama, Tsutomu Sato, Tsubasa Otake
• Citations: 30 (Details)

• Processing and Mechanical Properties of Al₂O₃ and Red Mud Particle Reinforced AA6061 Hybrid Composites, Journal of Minerals and Materials Characterization and Engineering, Vol.4 No.2, 2016
• Shaik Mujeeb Quader, B. Suryanarayana Murthy, Pinninti Ravinder Reddy
• Citations: 29 (Details)

• The Effect of Added Carbon Black to Concrete Mix on Corrosion of Steel in Concrete, Journal of Minerals and Materials Characterization and Engineering, Vol.3 No.4, 2015
• Sami Masadeh
• Citations: 29 (Details)

• Physico-Chemical and Thermal Characterization of Some Lignocellulosic Fibres: Ananas comosus (AC), Neuropeltis acuminatas (NA) and Rhecktophyllum camerunense (RC), Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.4, 2020
• Achille Désiré Omgba Betene, Fabien Ebanda Betene, Florian Martoïa, Pierre J. J. Dumont, Ateba Atangana, Pierre Marcel Anicet Noah
• Citations: 29 (Details)

• Characterization of Sintered Ceramic Tiles Produced from Steel Slag, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.9, 2012
• Benneth C. Chukwudi, Patrick.O. Ademusuru, Boniface A. Okorie
• Citations: 29 (Details)

• Multiple Response Optimization of Three-Body Abrasive Wear Behaviour of Graphite Filled Carbon-Epoxy ComPosites Using Grey-Based Taguchi Approach, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.9, 2012
• K.M. Subbaya, N. Rajendra, Y.S. Varadarajan, B. Suresha
• Citations: 29 (Details)

• Characterization of Egyptian Manganese Ores for Production of High Carbon Ferromanganese, Journal of Minerals and Materials Characterization and Engineering, Vol.1 No.2, 2013
• Mohammed Salah Fahim, Hoda El Faramawy, Azza Mohammed Ahmed, Saaed Nabil Ghali, Abd El Hakim Taha Kandil
• Citations: 29 (Details)

• Role of Strontium on the Crystallization of Calcium Hydrogen Phosphate Dihydrate (CHPD), Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.7, 2011
• K. Suguna, C. Sekar
• Citations: 29 (Details)

• Parameters Affecting the Production of High Carbon Ferromanganese in Closed Submerged Arc Furnace, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.1, 2012
• Mamdouh Eissa, Hoda El-Faramawy, Azza Ahmed, Saeed Nabil, Hossam Halfa
• Citations: 29 (Details)

• Characterization of Spent Household Zinc-Carbon Dry Cell Batteries in the Process of Recovery of Value Metals, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.6, 2012
• Majharul Haque Khan, A.S.W Kurny
• Citations: 29 (Details)

• Corrosion Behavior of 18/8 Stainless Steel and Nickel-Plated Low Carbon Steel in Cassava Fluid, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.10, 2009
• O.O. Oluwole, P.O. Atanda, O.A. Odekunbi, E. Odegbaju
• Citations: 29 (Details)

• Studies on L-valinium Picrate Single Crystal: A Promising NLO Crystal, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.5, 2009
• T. Uma Devi, N. Lawrence, R. Ramesh Babu, K. Ramamurthi, G. Bhagavannarayana
• Citations: 29 (Details)

• Model for Evaluation of the Concentration of Dissolved Phosphorus during Leaching of Iron Oxide Ore in Oxalic Acid Solution, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.3, 2009
• C. I. Nwoye
• Citations: 29 (Details)

• Corrosion Behavior of Tin-Plated Carbon Steel and Aluminum in NaCl Solutions Using Electrochemical Impedance Spectroscopy, Journal of Minerals and Materials Characterization and Engineering, Vol.7 No.4, 2008
• B.O. Oni, N.O. Egiebor, N.J. Ekekwe, A. Chuku
• Citations: 29 (Details)

• To Study the Effect of Austempering Temperature on Fracture Behaviour of Ni-Mo Austempered Ductile Iron (ADI), Journal of Minerals and Materials Characterization and Engineering, Vol.7 No.4, 2008
• Vikas Chawla, Uma Batra, D. Puri, Amita Chawla
• Citations: 28 (Details)

• Chemical and Mineralogical Characterization of Ghanaian Foundry Slags, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.2, 2012
• A. Andrews, E. Gikunoo, L. Ofosu-Mensah, H. Tofah, S. Bansah
• Citations: 28 (Details)

• Design of a Cantilever - Type Rotating Bending Fatigue Testing Machine, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.11, 2011
• K. K. Alaneme
• Citations: 28 (Details)

• Crystal Growth and Characterization of Potassium Manganese Nickel Sulphate Hexahydrate—A New UV Filter, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.11, 2012
• Vanitha Duraikkan, Sultan Asath Bahadur, Shunmuganarayanan Athimoolam
• Citations: 28 (Details)

• Mechanical Properties and Microstructures of Locally Produced Aluminium-Bronze Alloy, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.10, 2012
• Uyime Donatus, Joseph Ajibade Omotoyinbo, Itopa Monday Momoh
• Citations: 28 (Details)

• Theoretical and Experimental Analysis of Deep Drawing Cylindrical Cup, Journal of Minerals and Materials Characterization and Engineering, Vol.1 No.6, 2013
• Najmeddin Arab, Abotaleb Javadimanesh
• Citations: 28 (Details)

• Prediction of the Elastic Properties of Short Basalt Fiber Reinforced Al Alloy Metal Matrix Composites, Journal of Minerals and Materials Characterization and Engineering, Vol.2 No.1, 2014
• Ezhil Vannan, Paul Vizhian
• Citations: 28 (Details)

• Dry Sliding Wear Behavior of Aluminum 6063 Composites Reinforced with TiB₂ Particles, Journal of Minerals and Materials Characterization and Engineering, Vol.5 No.2, 2017
• K. Krishnamurthy, Mengistu Ashebre, J. Venkatesh, B. Suresha
• Citations: 28 (Details)

• Synthesis of 4A Zeolite and Characterization of Calcium- and Silver-Exchanged Forms, Journal of Minerals and Materials Characterization and Engineering, Vol.5 No.5, 2017
• Saeed Golbad, Parisa Khoshnoud, Nidal Abu-Zahra
• Citations: 27 (Details)

• Physical-Chemical and Mechanical Characterization of the Bast Fibers of Triumfetta cordifolia A.Rich. from the Equatorial Region of Cameroon, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.4, 2020
• Armel Edwige Mewoli, César Segovia, Fabien Betene Ebanda, Atangana Ateba, Pierre Marcel Anicet Noah, Benoit Ndiwe, Abel Emmanuel Njom
• Citations: 27 (Details)

• Finite Element Modeling Of Low Heat Conducting Building Bricks, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.8, 2012
• O. O. Oluwole, J. S. Joshua, H. O. Nwagwo
• Citations: 27 (Details)

• Processing of 5083 Aluminum Alloy Reinforced with Alumina through Microwave Sintering, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.11, 2012
• Jagesvar Verma, Anil Kumar, Rituraj Chandrakar, Rajesh Kumar
• Citations: 27 (Details)

• Preparation and Characterization of Electrically and Thermally Conductive Polymeric Nanocomposites, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.7, 2012
• Mousam Choudhury, Smita Mohanty, Sanjay K Nayak, Rakesh Aphale
• Citations: 27 (Details)

• Oxygenated Leaching of Copper Sulfide Mineral under Microwave-Hydrothermal Conditions, Journal of Minerals and Materials Characterization and Engineering, Vol.1 No.2, 2002
• Jiann-Yang Hwang, Shangzhao Shi, Zhiyong Xu, Xiaodi Huang
• Citations: 27 (Details)

• Alteration Characteristics Of Ilmenites From South India, Journal of Minerals and Materials Characterization and Engineering, Vol.4 No.1, 2005
• D. S. Rao, T. V. Vijayakumar, S. Prabhakar, G. Bhaskar Raju, T.K. Ghosh
• Citations: 27 (Details)

• Characterization and Comparison of Corrosion Behavior of Nanostructured TiAlN and AlCrN Coatings on Superfer 800H (INCOLOY 800 H) Substrate, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.9, 2009
• Vikas Chawla, D. Puri, S. Prakasha, Amita Chawla, Buta Singh Sidhu
• Citations: 27 (Details)

• Synthesis, Crystal Growth, Structural, Optical, Thermal and Mechanical Properties of Semiorganic Nonlinear Optical Material: L-Cystine Dihydrochloride, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.5, 2010
• T. Uma Devi, N. Lawrence, R. Rameshbabu, S. Selvanayagam, Helen Stoeckli-Evans, G. Bhagavannarayana, K. Ramamurthi
• Citations: 27 (Details)

• Electrochemical Impedance Spectroscopy Of Epoxy-Coated Steel Exposed To Dead Sea Water, Journal of Minerals and Materials Characterization and Engineering, Vol.4 No.2, 2005
• Sami Masadeh
• Citations: 26 (Details)

• Studies on Mechanical and Wear Properties of Al6061/Beryl Composites, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.7, 2012
• Reddappa Hosur Reddappa, Kitakanur Ramareddy Suresh, Hollakere Basavaraj Niranjan, Kestur Gundappa Satyanarayana
• Citations: 26 (Details)

• Influence of Microstructure and Experimental Parameters on Mechanical and Wear Properties of Al-TiC Surface Composite by FSP Route, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.5, 2012
• S. Jerome, S. Govind Bhalchandra, S.P. Kumaresh Babu, B. Ravisankar
• Citations: 26 (Details)

• Mechanical Properties of Potassium Titanate Whisker Reinforced Epoxy Resin Composites, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.2, 2012
• M. Sudheer, K. M. Subbaya, Dayananda Jawali, Thirumaleshwara Bhat
• Citations: 26 (Details)

• Effect of FCAW Process Parameters on Weld Bead Geometry in Stainless Steel Cladding, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.9, 2011
• V. Vasantha Kumar, N. Murugan
• Citations: 26 (Details)

• Study of Potentiodynamic Polarization Behaviour of Electroless Ni-B Coatings and Optimization using Taguchi Method and Grey Relational Analysis, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.14, 2011
• Suman Kalyan Das, Prasanta Sahoo
• Citations: 26 (Details)

• Wear Characteristics in Al-SiC Particulate Composites and the Al-Si Piston Alloy, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.14, 2011
• Z. Hasan, R. K. Pandey, D.K. Sehgal
• Citations: 26 (Details)

• Molybdenite as a Rhenium Carrier: First Results of a Spectroscopic Approach Using Synchrotron Radiation, Journal of Minerals and Materials Characterization and Engineering, Vol.1 No.5, 2013
• Teresa Pereira da Silva, Maria-Ondina Figueiredo, Daniel de Oliveira, João Pedro Veiga, Maria João Batista
• Citations: 26 (Details)

• Influence of Angle Ply Orientation on Tensile Properties of Carbon/Glass Hybrid Composite, Journal of Minerals and Materials Characterization and Engineering, Vol.1 No.5, 2013
• M. N. GuruRaja, A. N. HariRao
• Citations: 25 (Details)

• Electrical Properties of Nano-TiO₂ Thin Film Using Spin Coating Method, Journal of Minerals and Materials Characterization and Engineering, Vol.2 No.1, 2014
• Ayodele Abeeb Daniyan, Lasisi Ejibunu Umoru, Adeniyi Yisau Fasasi, Joseph Olatunde Borode, Kunle Michael Oluwasegun, Samuel Oloruntoba Olugbenga Olusunle
• Citations: 25 (Details)

• Optimization of Tribological Performance of Al-6061T6-15% SiCp-15% Al₂O₃ Hybrid Metal Matrix Composites Using Taguchi Method & Grey Relational Analysis, Journal of Minerals and Materials Characterization and Engineering, Vol.2 No.4, 2014
• Ashok Kr. Mishra, Vinod Kumar, Rajesh Kr. Srivastava
• Citations: 25 (Details)

• Influence of Friction Stir Welding Parameters on Sliding Wear Behavior of AA6061/0-10 wt.% ZrB₂ in-situ Composite Butt Joints, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.14, 2011
• I. Dinaharan, N. Murugan
• Citations: 25 (Details)

• Characterization of Ilmenite from Kerala Coastline, India:Implications in the Production of Synthetic Rutile, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.6, 2009
• M. Sundararajan, K.H. Bhat, S. Velusamy, N. Babu, M.E.K. Janaki, S. Sasibhooshanan, P.N. Mohan Das
• Citations: 25 (Details)

• Structural and Optical Characterization Studies on 2, 4- dinitrophenylhydrazine Single Crystal, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.4, 2010
• T. Uma Devi, N. Lawrence, R. Ramesh Babu, K. Ramamurthi, G. Bhagavannarayana
• Citations: 25 (Details)

• Design of a Diesel Fired Heat-Treatment Furnace, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.7, 2010
• K.K. Alaneme, S.O. Olanrewaju
• Citations: 25 (Details)

• Effects of Zinc Addition on the Performance of Aluminium as Sacrificial Anode in Seawater, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.2, 2011
• A. Muazu, S. A. Yaro
• Citations: 25 (Details)

• Coag-Flocculation Studies of Afzelia Bella Coagulant (ABC) in Coal Effluent Using Single and Simulated Multi Angle Nephelometry, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.3, 2011
• M.C. Menkiti, O.D. Onukwuli
• Citations: 25 (Details)

• Physico-Chemical and Thermal Characterization of a Lignocellulosic Fiber, Extracted from the Bast of Cola lepidota Stem, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.5, 2020
• Ndoumou Belinga Rémy Legrand, Meva’a Lucien, Ouagne Pierre, Betene Ebanda Fabien, Noah Pierre Marcel, Atangana Ateba Jean
• Citations: 25 (Details)

• The Effects of Frothers and Particles on the Characteristics of Pulp and Froth Properties in Flotation—A Critical Review, Journal of Minerals and Materials Characterization and Engineering, Vol.4 No.4, 2016
• Wei Zhang
• Citations: 25 (Details)

• Clay Characterization and Optimisation of Bleaching Parameters for Palm Kernel Oil Using Alkaline Activated Clays, Journal of Minerals and Materials Characterization and Engineering, Vol.2 No.6, 2014
• T. O. Salawudeen, A. O. Arinkoola, M. O. Jimoh, B. A. Akinwande
• Citations: 25 (Details)

• The Influence of Polyurethane Foam on the Insulation Characteristics of Mortar Pastes, Journal of Minerals and Materials Characterization and Engineering, Vol.5 No.2, 2017
• Ahmed Adel Mahmoud, Elsayed Abdel Ader Nasr, Ahmed Abdel Hamed Maamoun
• Citations: 24 (Details)

• Study of Mechanical Properties of Raffia Palm Fibre/Groundnut Shell Reinforced Epoxy Hybrid Composites, Journal of Minerals and Materials Characterization and Engineering, Vol.6 No.2, 2018
• Geoffrey Bem Nyior, Sylvester Aondolumun Aye, Sesugh Emmanuel Tile
• Citations: 24 (Details)

• Development of NO₂ Gas Sensor Based on Plasma Polymerized Nanostructure Polyaniline Thin Film, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.11, 2010
• Rajendra Kumar, Sunil Singh, A. K. Misra
• Citations: 24 (Details)

• Mechanically Alloyed Carbon Nanotubes (CNT) Reinforced Nanocrystalline AA 4032: Synthesis and Characterization, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.11, 2010
• M.S. Senthil Saravanan, S.P. Kumaresh Babu, K. Sivaprasad
• Citations: 24 (Details)

• Mechanical Behaviour of Duplex Phase Structures in a Medium Carbon Low Alloy Steel, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.7, 2010
• K.K. Alaneme, S. Ranganathan, T. Mojisola
• Citations: 24 (Details)

• A Comparison Of Liberation Determinations By Particle Area Percentage And Exposed Particle Perimeter Percentage In A Flotation Concentrator, Journal of Minerals and Materials Characterization and Engineering, Vol.1 No.1, 2002
• R. Lastra
• Citations: 24 (Details)

• Comparative Kinetics of Iron Ore Dissolution in Aqueous HCl-HNO₃ System, Journal of Minerals and Materials Characterization and Engineering, Vol.1 No.4, 2013
• Onyedika Gerald, Nwoko Christopher, Oguarah Ayebatonworio, Ogwuegbu Martin
• Citations: 24 (Details)

• Crystal Growth, Optical and Dielectric Properties of L-Histidine Hydrochloride Monohydrate Nonlinear Optical Single Crystals, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.8, 2012
• P. Koteeswari, S. Suresh, P. Mani
• Citations: 24 (Details)

• Correlation between Process Variables in Shielded Metal-Arc Welding (SMAW) Process and Post Weld Heat Treatment (PWHT) on Some Mechanical Properties of Low Carbon Steel Welds, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.9, 2012
• J. O. Olawale, S. A. Ibitoye, K.M. Oluwasegun, M. D. Shittu, R. C. Ofoezie
• Citations: 23 (Details)

• Evaluation of the Refractory Properties of Nigerian Ozanagogo Clay Deposit, Journal of Minerals and Materials Characterization and Engineering, Vol.1 No.6, 2013
• Alexander Asanja Jock, Fatai Afolabi Ayeni, Abdulkarin Salawu Ahmed, Umar Adeiza Sullayman
• Citations: 23 (Details)

• Investigation of Sida acuta (Wire Weed) Plant Extract as Corrosion Inhibitor for Aluminium-Copper-Magnessium Alloy in Acidic Medium, Journal of Minerals and Materials Characterization and Engineering, Vol.2 No.4, 2014
• Fatai Afolabi Ayeni, Saheed Alawode, Dorcas Joseph, Patrick Sukop, Victoria Olawuyi, Temitope Emmanuel Alonge, Oladuuni Oyelola Alabi, Oluwakayode Oluwabunmi, Francis Ireti Alo
• Citations: 23 (Details)

• Corrosion Behaviour of Modified HVOF Sprayed WC Based Cermet Coatings on Stainless Steel, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.11, 2011
• L.P. Ward, B. Hinton, D. Gerrard, K. Short
• Citations: 23 (Details)

• Synthesis, Optical and Dielectric Properties of Tris-Glycine Zinc Chloride (TGZC) Single Crystals, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.6, 2011
• S. Suresh, D. Arivuoli
• Citations: 23 (Details)

• Study On Application Of Alumina In High-Purity Andalusite Based Refractory, Journal of Minerals and Materials Characterization and Engineering, Vol.3 No.2, 2004
• Guihua Liao, Keying He, Liusheng Li, Mingxue Jiang
• Citations: 23 (Details)

• Utilization of Granite Powder as a Filler for Polybutylene Terepthalate Toughened Epoxy Resin, Journal of Minerals and Materials Characterization and Engineering, Vol.5 No.1, 2006
• H. V. Ramakrishna, S. K Rai
• Citations: 23 (Details)

• Effect of Magnesium and Calcium as Spheroidizers on the Graphite Morphology in Ductile Cast Iron, Journal of Minerals and Materials Characterization and Engineering, Vol.6 No.1, 2007
• O.O Oluwole, O.E. Olorunniwo, O.O. Ogundare, P.O. Atanda, O.O Oridota
• Citations: 23 (Details)

• Preparation of Al-5Ti Master Alloys for the In-Situ Processing of Al-TiC Metal Matrix Composites, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.7, 2009
• Satish Babu Boppana, K . Chennakeshavalu
• Citations: 23 (Details)

• Oxidation Studies of T-91 and T-22 Boiler Steels in Air at 900°C, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.8, 2010
• Dinesh Gond, Vikas Chawla, D. Puri, S. Prakash
• Citations: 23 (Details)

• The Effect of Heat Treatment on Titania Slag, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.9, 2010
• S. Samal, B.K. Mohapatra, P.S. Mukherjee
• Citations: 23 (Details)

• Growth and Structural Characterization of Gadolinium Neodymium Oxalate Crystals Grown in Hydro-Silica Gel, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.12, 2010
• Ignatius Korah, Cyriac Joseph, M.A. Ittyachen
• Citations: 23 (Details)

• Degradation Behavior of High Chromium Sodium-Modified A356.0-Type Al-Si-Mg Alloy in Simulated Seawater Environment, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.6, 2011
• M. Abdulwahab, I.A. Madugu, S.A. Yaro, A.P.I. Popoola
• Citations: 23 (Details)

• Inhibition of Aluminium Corrosion Using Carica papaya Leaves Extract in Sulphuric Acid, Journal of Minerals and Materials Characterization and Engineering, Vol.6 No.1, 2018
• Baruku Kasuga, Eugene Park, Revocatus L. Machunda
• Citations: 23 (Details)

• Performance Assessment of Selected Nigerian Vegetable Oils as Quenching Media in Hardening Process for Medium Carbon Steel, Journal of Minerals and Materials Characterization and Engineering, Vol.3 No.2, 2015
• Joseph Babalola Agboola, Oladiran Abubakre Kamardeen, Edeki Mudiare, Michael Bolaji Adeyemi, Samuel Ayo Afolabi
• Citations: 23 (Details)

• Tensile Properties and Fractographic Analysis of Low Density Polyethylene Composites Reinforced with Chemically Modified Keratin-Based Biofibres, Journal of Minerals and Materials Characterization and Engineering, Vol.3 No.4, 2015
• Isiaka Oluwole Oladele, Jimmy Lolu Olajide, Okikiola Ganiyu Agbabiaka, Olawale Opeyemi Akinwumi
• Citations: 23 (Details)

• Microstructure and Properties Characterization of WC-Co-Cr Thermal Spray Coatings, Journal of Minerals and Materials Characterization and Engineering, Vol.6 No.4, 2018
• Karla Ofelia Méndez-Medrano, Cecilio Jesús Martínez-González, Francisco Alvarado-Hernández, Omar Jiménez, Víctor Hugo Baltazar-Hernández, Haideé Ruiz-Luna
• Citations: 23 (Details)

• Optimization of Carburized UNS G10170 Steel Process Parameters Using Taguchi Approach and Response Surface Model (RSM), Journal of Minerals and Materials Characterization and Engineering, Vol.2 No.6, 2014
• Olawale Samuel Fatoba, Olaitan Lukman Akanji, Abiodun Samson Aasa
• Citations: 22 (Details)

• Fatigue Behaviour of Silicon Carbide and Fly Ash Dispersion Strengthened High Performance Hybrid Al 5083 Metal Matrix Composites, Journal of Minerals and Materials Characterization and Engineering, Vol.5 No.5, 2017
• N. Santhosh, U. N. Kempaiah, Ganesh Sajjan, Ashwin C. Gowda
• Citations: 22 (Details)

• A Comparative Study on the Milling Speed for the Synthesis of Nano-Structured Al 6063 Alloy Powder by Mechanical Alloying, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.6, 2011
• Hafeez Ahamed, V. Senthil Kumar
• Citations: 22 (Details)

• Fabrication and Investigation of Damping Properties of Nano Particulate Composites, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.9, 2010
• K. S. Umashankar, K. V. Gangadharan, Vijay Desai, B. Shivamurthy
• Citations: 22 (Details)

• Chemical Solubilization of Coal using HF and Characterization of Products by FTIR, FT Raman, SEM and Elemental Analysis, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.10, 2010
• B. Manoj, A.G. Kunjomana
• Citations: 22 (Details)

• Development of Insulating Refractory Ramming Mass from Some Nigerian Refractory Raw Materials, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.9, 2009
• O. A. Olasupo, J. O. Borode
• Citations: 22 (Details)

• Model for Predictive Analysis of the Concentration of Phosphorus Removed during Leaching of Iron Oxide Ore in Sulphuric Acid Solution, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.4, 2009
• C. I. Nwoye, S. Ndlu
• Citations: 22 (Details)

• Waste Colored Glasses as Sintering Aid in Ceramic Tiles Production, Journal of Minerals and Materials Characterization and Engineering, Vol.5 No.2, 2006
• Jiann-Yang Hwang, Xiaodi Huang, Adele Garkida, Allison Hein
• Citations: 22 (Details)

• Adsorption of Vapor Phase Mercury on Various Carbons, Journal of Minerals and Materials Characterization and Engineering, Vol.3 No.1, 2004
• Jinjing Luo, A. M. Hein, J.Y. Hwang
• Citations: 22 (Details)

• Fluorine Doping Effect in the New Superconducting Y₃Ba₅Cu₈O_y Compound, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.14, 2011
• K. Srinivasan, George Thomas C., P. Padaikathan
• Citations: 22 (Details)

• Effect of Micro Size Cenosphere Particles Reinforcement on Tribological Characteristics of Vinylester Composites under Dry Sliding Conditions, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.10, 2012
• Santram Chauhan, Sunil Thakur
• Citations: 22 (Details)

• Modeling the Drilling Process of Aluminum Composites Using Multiple Regression Analysis and Artificial Neural Networks, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.10, 2012
• Ahmad Mayyas, Awni Qasaimeh, Khalid Alzoubi, Susan Lu, Mohammed T. Hayajneh, Adel M. Hassan
• Citations: 22 (Details)

• Evaluation of Corrosion Behaviour of Grey Cast Iron and Low Alloy Steel in Cocoa Liquor and Well Water, Journal of Minerals and Materials Characterization and Engineering, Vol.1 No.2, 2013
• John Oluyemi Olawale, Jamiu Kolawole Odusote, Abuldkarim Baba Rabiu, Emmanuel Onazi Ochapa
• Citations: 21 (Details)

• Growth, Structural, optical and hardness studies of lithium potassium sulphate single crystals – an inorganic NLO material, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.9, 2012
• G. Pasupathi, P. Philominathan
• Citations: 21 (Details)

• Mechanical and Machining Properties Analysis of Al6061-Cu-Reinforced SiC_P Metal Matrix Composite, Journal of Minerals and Materials Characterization and Engineering, Vol.2 No.1, 2014
• Serajul Haque, Prem Kumar Bharti, Akhtar Hussain Ansari
• Citations: 21 (Details)

• Application of Automated Ball Indentation for Property Measurement of Degraded Zr2.5Nb, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.7, 2011
• Kamal Sharma, P.K. Singh, Vivek Bhasin, K.K. Vaze
• Citations: 21 (Details)

• Corrosion Behaviour of Heat Treated Rolled Medium Carbon Steel in Marine Environment, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.10, 2011
• O.O. Daramola, B.O. Adewuyi, I.O. Oladele
• Citations: 21 (Details)

• Corrosion of Water Pipes: a Comprehensive Study of Deposits, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.5, 2012
• Vikas Chawla, Prema G. Gurbuxani, G.R. Bhagure
• Citations: 21 (Details)

• High Temperature Corrosion Behaviour of T-91 and T-22 Bare Steel in 75wt.%Na₂SO₄+25wt.%NaCl Molten Salt Environment at 900°C, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.7, 2010
• Dinesh Gond, Vikas Chawla, D. Puri, S. Prakash
• Citations: 21 (Details)

• Phosphorus Removal Capability of Aspergillus Terreus and Bacillus Subtilis from Nigeria’s Agbaja Iron Ore, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.12, 2010
• C.N. Anyakwo, O.W. Obot
• Citations: 21 (Details)

• Quality of Some Nigerian Coals as Blending Stock in Metallurgical Coke Production, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.1, 2011
• M. B. Nasirudeen, A. Jauro
• Citations: 21 (Details)

• Microwave Assisted Liberation of High Phosphorus Oolitic Iron Ore, Journal of Minerals and Materials Characterization and Engineering, Vol.2 No.5, 2014
• Mamdouh Omran, Timo Fabritius, Nagui Abdel-Khalek, Mortada El-Aref, Abd El-Hamid Elmanawi, Mahmoud Nasr, Ahmed Elmahdy
• Citations: 21 (Details)

• Experimental Studies of Self Healing Behaviour of Under-Aged Al-Mg-Si Alloys and 60Sn-40Pb Alloy Reinforced Aluminium Metal-Metal Composites, Journal of Minerals and Materials Characterization and Engineering, Vol.3 No.1, 2015
• Kenneth Kanayo Alaneme, Oluwafemi Isaac Omosule
• Citations: 20 (Details)

• Extender Properties of Some Nigerian Clays, Journal of Minerals and Materials Characterization and Engineering, Vol.4 No.5, 2016
• Iheoma C. Chukwujike, Isaac O. Igwe
• Citations: 20 (Details)

• Comparative Beneficiation Study of Gyel Columbite Ore Using Double Stage (Magnetic-to-Magnetic and Magnetic-to-Gravity) Separation Techniques, Journal of Minerals and Materials Characterization and Engineering, Vol.4 No.2, 2016
• Oladunni Oyelola Alabi, Shehu Aliyu Yaro, George Thomas Dungka, Ferdinand Asuke, Binta Hassan
• Citations: 20 (Details)

• Slurry Erosive Wear Behavior of Plasma Sprayed Inconel-718 Coatings on Al6061 Alloy, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.5, 2011
• C.S. Ramesh, Suresh Kumar, D.S. Devaraj, R. Keshavamurthy
• Citations: 20 (Details)

• Effect of Precipitation Hardening on Hardness and Microstructure of Austenitic Manganese Steel, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.2, 2010
• S. Aribo, K.K. Alaneme, D.O. Folorunso, F.O. Aramide
• Citations: 20 (Details)

• Plasma spray fabrication of near-net-shape ceramic objects, Journal of Minerals and Materials Characterization and Engineering, Vol.2 No.2, 2003
• Shangzhao Shi, Jiann-Yang Hwang
• Citations: 20 (Details)

• Surface Area and Conductivity of Open-Cell Carbon Foams, Journal of Minerals and Materials Characterization and Engineering, Vol.5 No.1, 2006
• Adriana M. Druma, M. Khairul Alam, Calin Druma
• Citations: 20 (Details)

• Role of Heat Treatment on Al6061- Frit Particulate Composites, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.4, 2012
• D. Ramesh, R.P. Swamy, T.K. Chandrashekar
• Citations: 20 (Details)

• Mineralogical Characterization of Kuru Cassiterite Ore by SEM-EDS,XRD and ICP Techniques, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.9, 2011
• Martin Ogwuegbu, Gerald Onyedika, Jiann-Yang Hwang, Asuwaji Ayuk, Zhiwei Peng, Bowen Li, Ejike E.N.O., Matt Andriese
• Citations: 20 (Details)

• Beneficiation and Characterization of Gold from Itagunmodi Gold Ore by Cyanidation, Journal of Minerals and Materials Characterization and Engineering, Vol.2 No.4, 2014
• Olasupo Daniel Ogundare, Mosobalaje Oyebanji Adeoye, Adelana Rasaq Adetunji, Olusegun Oyeleke Adewoye
• Citations: 20 (Details)

• Synthesis, Growth and Characterization of Organic Nonlinear Optical Single Crystals of 4-Bromo-4’-Methyl Benzylidene Aniline, Journal of Minerals and Materials Characterization and Engineering, Vol.2 No.4, 2014
• L. Jothi, R. Ramesh Babu, K. Ramamurthi
• Citations: 20 (Details)

• Experimental Investigation of Dynamic Characteristics of Multilayer PU Foam Sandwich Panels, Journal of Minerals and Materials Characterization and Engineering, Vol.1 No.5, 2013
• Sourabha S. Havaldar, Ramesh S. Sharma
• Citations: 20 (Details)

• Atmospheric Corrosion Studies of Ductile Iron and Austenitic Stainless Steel in an Extreme Marine Environment, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.9, 2012
• Olasupo Ogundare, Babaniyi Babatope, Adelana Razaq Adetunji, Samuel Olugbenga Oloruntoba Olusunle
• Citations: 20 (Details)

• Effect of Methyl Methacrylate– Acrylonitrile -Butadiene–Styrene (MABS) on the Mechanical and Thermal Properties of Poly (Methyl Methacrylate) (PMMA)-Fly Ash Cenospheres (FAC) Filled Composites, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.4, 2012
• M. B. Kulkarni, P. A. Mahanwar
• Citations: 19 (Details)

• Optimal Evaluation of Coag-Flocculation Factors for Alum-Brewery Effluent System by Response Surface Methodology, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.5, 2012
• M.C. Menkiti, M.C. Aneke, E.B. Ogbuene, O.D. Onukwuli, E.O. Ekumankama
• Citations: 19 (Details)

• Petroleum Coke Particle Size Effects on the Treatment of EAF Dust through Microwave Heating, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.4, 2009
• Xiang Sun, Jiann-Yang Hwang, Xiaodi Huang, Bowen Li
• Citations: 19 (Details)

• Applied Mineralogical Studies on Iranian Hard Rock Titanium Deposit, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.3, 2010
• A. Mehdilo, M. Irannajad
• Citations: 19 (Details)

• Effect of Core Thickness and Core Density on Low Velocity Impact Behavior of Sandwich Panels with PU Foam Core, Journal of Minerals and Materials Characterization and Engineering, Vol.3 No.3, 2015
• Sunith Babu Loganathan, Hanumanahally Kambada Shivanand
• Citations: 19 (Details)

• Enhancement of Insulating Refractory Properties of Selected Nigeria Fire-Clays Using Coconut Shell, Journal of Minerals and Materials Characterization and Engineering, Vol.3 No.6, 2015
• Eugenia Obiageli Obidiegwu, David Ehigie Esezobor, Johnson Olumuyiwa Agunsoye, Ganiyu Ishola Lawal
• Citations: 19 (Details)

• Mechanical Properties and Dimensional Stability of Rigid PVC Foam Composites Filled with High Aspect Ratio Phlogopite Mica, Journal of Minerals and Materials Characterization and Engineering, Vol.3 No.4, 2015
• Murtatha M. Jamel, Parisa Khoshnoud, Subhashini Gunashekar, Nidal Abu-Zahra
• Citations: 19 (Details)

• Comparative Study on Geopolymer Binders Based on Two Alkaline Solutions (NaOH and KOH), Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.6, 2020
• Seick Omar Sore, Adamah Messan, Elodie Prud’Homme, Gilles Escadeillas, François Tsobnang
• Citations: 19 (Details)

• Nucleation of Fe-Rich Intermetallic Phases on α-Al₂O₃ Oxide Films in Al-Si Alloys, Journal of Minerals and Materials Characterization and Engineering, Vol.3 No.1, 2015
• Pilar Orozco-González, Manuel Castro-Román, Simitrio Maldonado-Ruíz, Sergio Haro-Rodríguez, Fabián Equihua-Guillén, Rodrigo Muñiz-Valdez, Salvador Luna-Álvarez, Miguel Montoya-Dávila, Alejandra Hernández-Rodríguez
• Citations: 18 (Details)

• Characterization of the Thermo-Microstructural Analysis of Raffia Palm Fibers Proposed for Roofing Sheet Production, Journal of Minerals and Materials Characterization and Engineering, Vol.3 No.4, 2015
• R. S. Odera, O. D. Onukwuli, C. U. Atuanya
• Citations: 18 (Details)

• Evaluation of Wear and Corrosion Properties of AA6061/TiB₂ Composites Produced by FSP Technique, Journal of Minerals and Materials Characterization and Engineering, Vol.5 No.6, 2017
• Dakarapu Santha Rao, Nallu Ramanaiah
• Citations: 18 (Details)

• Double Acid-Base Extraction of Silicic Acid from Quartz Sand, Journal of Minerals and Materials Characterization and Engineering, Vol.5 No.6, 2017
• Laksmita Prima Santi, Djoko Mulyanto, Didiek Hadjar Goenadi
• Citations: 18 (Details)

• Carbon Nanotube Filters for Removal of Air Pollutants from Mobile Sources, Journal of Minerals and Materials Characterization and Engineering, Vol.6 No.1, 2018
• L. Romero-Guzmán, L. R. Reyes-Gutiérrez, E. T. Romero-Guzmán, E. Savedra-Labastida
• Citations: 18 (Details)

• Growth and Characterization of Gamma Glycine Single Crystals Grown from Alpha Glycine in the Presence of Sodium Acetate, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.4, 2011
• T. Baraniraj, P. Philominathan
• Citations: 18 (Details)

• Growth Kinetics and Optical and Mechanical Properties of Glycine Lithium Sulphate (GLS) Crystals, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.12, 2010
• S. Suresh, A. Ramanand, D. Jayaraman, S.M. Navis Priya
• Citations: 18 (Details)

• Oxidation Behavior of Fe₃Al-5Cr- (0, 0.5, 1.5) Ti Alloys at Temperature Ranges from 800℃ to 1200 ℃, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.9, 2010
• Hossam Halfa
• Citations: 18 (Details)

• Leaching of Minerals in Degari Coal, Journal of Minerals and Materials Characterization and Engineering, Vol.5 No.2, 2006
• Mohammad Shakirullah, Imtiaz Ahmad, Mohammad Arsala Khan, Mohammad Ishaq, Habib ur Rehman, Uzma Khan
• Citations: 18 (Details)

• Characterization of Ajaokuta Coke for Blast Furnace Ironmaking, Journal of Minerals and Materials Characterization and Engineering, Vol.5 No.2, 2006
• A.O. Adeleke, R.S. Makan, S.A. Ibitoye
• Citations: 18 (Details)

• Electrical And Thermal Coatings From A Single-Walled Carbon Nanotube (SWCNT)/Polymer Composite, Journal of Minerals and Materials Characterization and Engineering, Vol.3 No.2, 2004
• Gerard T. Caneba, Jay Axland
• Citations: 18 (Details)

• Effect of Surface Treatment on Tribological Behavior of Ti-6Al-4V Implant Alloy, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.7, 2012
• B. K. C. Ganesh, N. Ramanaiah, P. V. Chandrasekhar Rao
• Citations: 18 (Details)

• Interlaminar Fracture Toughness and Low-Velocity Impact Resistance of Woven Glass Epoxy Composite Laminates of EP3 Grade, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.3, 2012
• N. Rajesh Mathivanan, J. Jerald
• Citations: 18 (Details)

• Growth and Characterization of a New Semi-Organic Nonlinear Optical Crystal: Thiosemicarbazide Cadmium Acetate, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.3, 2012
• K. Selvaraju, K. Kirubavathi, S. Kumararaman
• Citations: 18 (Details)

• The Effect of Time, Percent of Copper and Nickel on Naturally Aged Al-Cu-Ni Cast Alloys, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.2, 2012
• Mohammad M. Hamasha, Ahmad T. Mayyas, Adel M. Hassan, Mohammed T. Hayajneh
• Citations: 18 (Details)

• Characterization of Plasma Sprayed Hydroxyapatite Coatings on AISI 316L SS and Titanium Substrate and their Corrosion Behavior in Simulated Body Fluid, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.11, 2011
• Manoj Mittal, S. K. Nath, Satya Prakash
• Citations: 18 (Details)

• Beneficiation and Characterization of Detrital Zircons from Beach Sand and Red Sediments in India, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.15, 2011
• Sunita Routray, R. Bhima Rao
• Citations: 18 (Details)

• Effect of Varying Corn Cob and Rice Husk Ashes on Properties of Moulding Sand, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.15, 2011
• Sunday Aribo
• Citations: 18 (Details)

• Effect of Magnesium on the Mechanical and Bioactive Properties of Biphasic Calcium Phosphate, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.10, 2012
• Ponnusamy Kanchana, Chinnathambi Sekar
• Citations: 18 (Details)

• Corrosion Behavior of Cu-Zn-Ni Shape Memory Alloys, Journal of Minerals and Materials Characterization and Engineering, Vol.1 No.2, 2013
• S. Sathish, U. S. Mallik, T. N. Raju
• Citations: 18 (Details)

• Separation Behaviour of Iron Ore Fines in Kelsey Centrifugal Jig, Journal of Minerals and Materials Characterization and Engineering, Vol.1 No.3, 2013
• Nirlipta P. Nayak, Bhatu K. Pal
• Citations: 18 (Details)

• Effect of Bitumen on the Mechanical Properties of Medium Carbon Steel, Journal of Minerals and Materials Characterization and Engineering, Vol.1 No.4, 2013
• Abdulmumin Akoredeley Alabi, Peter Bitrus Madakson, Danjuma Saleh Yawas, Terver Ause
• Citations: 18 (Details)

• Corrosion Resistance of Heat-Treated NST 37-2 Steel in Hydrochloric Acid Solution, Journal of Minerals and Materials Characterization and Engineering, Vol.1 No.1, 2013
• David Abimbola Fadare, Taiwo Gbolarumi Fadara
• Citations: 18 (Details)

• Amaranthus cordatus as a Green Corrosion Inhibitor for Mild Steel in H₂SO₄ and NaCl, Journal of Minerals and Materials Characterization and Engineering, Vol.2 No.3, 2014
• Michael O. Nwankwo, Peter O. Offor, Simeon I. Neife, Lucky C. Oshionwu, Ndubuisi E. Idenyi
• Citations: 18 (Details)

• Corrosion Characteristics of As-Cast Aluminium Bronze Alloy in Selected Aggressive Media, Journal of Minerals and Materials Characterization and Engineering, Vol.1 No.5, 2013
• Bukola Joseph Babalola, Michael Oluwatosin Bodunrin, Joseph Olatunde Borode, Kenneth Kanayo Alaneme
• Citations: 17 (Details)

• Recovery of Iron Bearing Minerals from Beneficiation Plant 2 Thickner Underflow of JSW Steel Limited, Journal of Minerals and Materials Characterization and Engineering, Vol.1 No.2, 2013
• Tekkalakote Umadevi, Amit Pratap Singh, Kumar Abhishek, Basavareddy Suresh, Rameshwar Sah
• Citations: 17 (Details)

• FEM Simulation and Experimental Validation of Cold Forging Behavior of LM6 Base Metal Matrix Composites, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.10, 2012
• Hillol Joardar, Goutam Sutradhar, Nitai Sundar Das
• Citations: 17 (Details)

• Growth, Optical, Mechanical and Dielectric Properties of Glycine Zinc Chloride NLO Single Crystals, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.12, 2011
• S. Suresh, D. Arivuoli
• Citations: 17 (Details)

• Performance of Nanostructured Metal Nitride Coated T-22 Boiler Steel in Na₂SO₄–60% V₂O₅ Environment at 900°C under Cyclic Conditions, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.7, 2011
• Vikas Chawla, Amita Chawla, D. Puri, S. Prakash, Buta Singh Sidhu
• Citations: 17 (Details)

• Corrosion Protection of Carbon Steel by Poly (aniline-co-o-toluidine) and Poly (pyrrole-co-o-toluidine) Copolymer Coatings, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.8, 2011
• Nelofar Tanveer, M. Mobin
• Citations: 17 (Details)

• Tempering Heat Treatment Effects on Steel Welds, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.8, 2011
• A.V. Adedayo, S.A. Ibitoye, O.O. Oluwole
• Citations: 17 (Details)

• Development of an Environmentally Friendly in-situ Pack-Cyaniding Technique, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.1, 2012
• K. J. Akinluwade, A. R. Adetunji, M. O. Adeoye, L. E. Umoru, P. N. Kalu, A. T. Taiwo, O. O. Adewoye
• Citations: 17 (Details)

• Mechanical Properties of Iron Ore Tailings Filled-Polypropylene Composites, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.7, 2012
• S. M. Adedayo, M. A. Onitiri
• Citations: 17 (Details)

• Growth and Characterization of New Non Linear Optical Bis-Glycine Hydro Bromide (BGHB) Single Crystal, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.6, 2012
• S. Sampthkrishnan, N. Balamurugan, R. Kumutha, Y. Vidyalakshmi, S. Muthu
• Citations: 17 (Details)

• Characterization and Flotation of Sulfur from Chalcopyrite Concentrate Leaching Residue, Journal of Minerals and Materials Characterization and Engineering, Vol.2 No.1, 2003
• H. K. Lin
• Citations: 17 (Details)

• Effect of Changing Environments on Microstructure of HDPE Polymer, Journal of Minerals and Materials Characterization and Engineering, Vol.6 No.1, 2007
• S. Bal, D. Mahesh, T.K. Sen, B.C. Ray
• Citations: 17 (Details)

• Characterization of Cold Briquetted Iron (CBI)By X-Ray Diffraction Technique, Journal of Minerals and Materials Characterization and Engineering, Vol.7 No.3, 2008
• S. A. Ibitoye, A. A. Afonja
• Citations: 17 (Details)

• Tensile Strength of Squeeze Cast Carbon Fibers Reinforced Al-Si Matrix Composites, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.2, 2011
• Ahmed A. Moosa, Kahtan K. Al-Khazraji, Osama S. Muhammed
• Citations: 17 (Details)

• The Effect of Plastic Deformation and Magnesium Content on the Mechanical Properties of 6063 Aluminium Alloys, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.6, 2010
• J.A. Omotoyinbo, I.O. Oladele
• Citations: 17 (Details)

• Improvement of High Temperature Wear Resistance of AISI 316 ASS through NiCrBSiCFe Plasma Spray Coating, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.7, 2010
• N. L . Parthasarathi, Muthukannan Duraiselvam
• Citations: 17 (Details)

• Model for Predictive Analysis of the Quantity of Water Evaporated during the Primary-Stage Processing of Bioceramic Material Sourced from Kaolin, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.2, 2010
• C. I. Nwoye, K. Okeke, M. C. Obi, U. Nwanyanwu, G. C. Obasi, O. O. Onyemaobi
• Citations: 17 (Details)

• Potential of Tin Tailings an Industrial Waste for Refractory Materials, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.2, 2010
• V.S. Aigbodion, A. AbdulRasheed, S.O. Olajide, J.O. Agunsoye, I.Y. Sulaiman
• Citations: 17 (Details)

• Effect of Blast Furnace Sludge (BFS) Characteristics on Suitable Recycling Process Determining, Journal of Minerals and Materials Characterization and Engineering, Vol.5 No.4, 2017
• Mamdouh Omran, Timo Fabritius, Timo Paananen
• Citations: 17 (Details)

• Encroachment of the Buriganga River in Bangladesh, Journal of Minerals and Materials Characterization and Engineering, Vol.5 No.5, 2017
• Swarnali Mahmood, Fatema Tuz Johra Nourin, Ayesha Siddika, Tazeen Fatima Khan
• Citations: 16 (Details)

• Simulation and Optimization Characteristic of Novel MoS₂/c-Si HIT Solar Cell, Journal of Minerals and Materials Characterization and Engineering, Vol.5 No.5, 2017
• Sue Xu, Xiangbin Zeng, Wenzhao Wang, Guangtong Zhou, Yishuo Hu, Shaoxiong Wu, Yang Zeng
• Citations: 16 (Details)

• Progress on Fabric Electrodes Used in Biological Signal Acquisition, Journal of Minerals and Materials Characterization and Engineering, Vol.3 No.3, 2015
• Zhen Liu, Xiaoxia Liu
• Citations: 16 (Details)

• Role of Metallurgy in the Localized Corrosion of Carbon Steel, Journal of Minerals and Materials Characterization and Engineering, Vol.6 No.6, 2018
• Recep Avci, Bret H. Davis, Nathaniel Rieders, Kilean Lucas, Manjula Nandasiri, Dave Mogk
• Citations: 16 (Details)

• Corrosion Behavior of Nanostructured TiAlN and AlCrN Hard Coatings on Superfer 800H Superalloy in Simulated Marine Environment, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.9, 2009
• Vikas Chawla, D. Puri, S. Prakash, Buta Singh Sidhu
• Citations: 16 (Details)

• Effect of Silicon Content and Shake-Out Time on Hardness and Grain Size Properties of GL 250 Cast Iron, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.3, 2011
• P. Atanda, G. Oluwadare, O. Oluwole
• Citations: 16 (Details)

• Lengthening, Cracking and Weldability Problems of Fe–Ni–Cr Alloy Tube, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.2, 2009
• Ali Babakr, Fakhruddin Habiby
• Citations: 16 (Details)

• Characterization of Cold Briquetted Iron (CBI) By X-Ray Diffraction Technique, Journal of Minerals and Materials Characterization and Engineering, Vol.7 No.1, 2008
• S. A. Ibitoye, A. A. Afonja
• Citations: 16 (Details)

• Household Solid Waste Recycling Induced Production Values and Employment Opportunities in Taiwan, Journal of Minerals and Materials Characterization and Engineering, Vol.1 No.2, 2002
• Esher Hsu, Chen-Ming Kuo
• Citations: 16 (Details)

• Effect of Cell Size on the Fundamental Natural Frequency of FRP Honeycomb Sandwich Panels, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.7, 2012
• Sourabha S. Havaldar, Ramesh S Sharma, Arul Prakash M. D. Antony, Mohan Bangaru
• Citations: 16 (Details)

• Study on Factors Effecting Weld Pool Geometry of Pulsed Current Micro Plasma Arc Welded AISI 304L Austenitic Stainless Steel Sheets Using Statistical Approach, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.8, 2012
• Kondapalli Siva Prasad, Chalamalasetti Srinivasa Rao, Damera Nageswara Rao
• Citations: 16 (Details)

• High Temperature Oxidation and Hot Corrosion Behaviour of Yttria- Stabilised Zirconia as Plasma Sprayed Coating in Air and Salt at 900°C under Cyclic Condition, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.3, 2012
• Dinesh Gond, R.S. Lalbondre, D. Puri, S. Prakash
• Citations: 16 (Details)

• Evaluating the Influence of Ageing Temperature on the Mechanical Properties of Al-Mg-Si Alloy, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.14, 2011
• I.O. Oladele, J.A. Omotoyinbo
• Citations: 16 (Details)

• Coal Chemistry and Morphology of Thar Reserves,Pakistan, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.8, 2012
• Anila Sarwar, M. Nasiruddin Khan, Kaniz Fizza Azhar
• Citations: 16 (Details)

• Assessment of Cutting Parameters Influencing on Thrust Force and Torque during Drilling Particulate Filled Glass Fabric Reinforced Epoxy Composites, Journal of Minerals and Materials Characterization and Engineering, Vol.1 No.3, 2013
• Bhadrabasol Revappa Raju, Bheemappa Suresha, Ragera Parameshwarappa Swamy, Bannangadi Swamy Gowda Kanthraju
• Citations: 16 (Details)

• Industrial Potentiality of Alluvial Clays Deposits from Cameroon: Influence of Lateritic Clayey Admixture for Fired Bricks Production, Journal of Minerals and Materials Characterization and Engineering, Vol.1 No.5, 2013
• Aubin Nzeugang Nzeukou, Véronique Kabeyene Kamgang, Robert Eko Medjo, Uphie Chinje Melo, André Njoya, Patrick Ninla Lemougna, Nathalie Fagel
• Citations: 15 (Details)

• X-Ray Diffraction, Electron Paramagnetic Resonance and Optical Absorption Study of Bauxite, Journal of Minerals and Materials Characterization and Engineering, Vol.2 No.2, 2014
• Tanguturi Ravindra Reddy, Krishnan Thyagarajan, Ovidio Almanza Montero, Sanapa Reddy Lakshmi Reddy, Tamio Endo
• Citations: 15 (Details)

• Development of Iron Based Brake Friction MMC Used for Military Aircraft Application by A New P/M Route, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.8, 2011
• Mohammad Asif, K. Chandra, P.S. Misra
• Citations: 15 (Details)

• Secondary Recovery of Columbite from Tailing Dump in Nigerian Jos Mines Field, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.6, 2012
• F.A Ayeni, I. A Madugu, P. Sukop, S. A Ibitoye, A. A. Adeleke, M Abdulwahab
• Citations: 15 (Details)

• Characterization of Opaques off Konkan Coast Maharashtra, Central West Coast of India, Journal of Minerals and Materials Characterization and Engineering, Vol.6 No.1, 2007
• A.R Gujar, N Angusamy, G. V. Rajamanickam
• Citations: 15 (Details)

• Pilot Scale Froth Flotation Studies To Upgrade Nigerian Itakpe Sinter Grade Iron Ore To A Midrex-Grade Super-Concentrate, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.5, 2009
• S. A. Ola, G.A. Usman, A.A. Odunaike, S.M. Kollere, P.O. Ajiboye, A. O. Adeleke
• Citations: 15 (Details)

• Study on Corrosion Behavior of Pearlitic Rail Steel, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.7, 2011
• S. Samal, A. Bhattaacharyya, S.K. Mitra
• Citations: 15 (Details)

• Role of Post Heat Treatment of Plasma Sprayed Pure and Al₂O₃-TiO₂ Reinforced Hydroxyapatite Coating on the Microstructure and Mechanical Properties, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.12, 2010
• Gurbhinder Singh, Surendra Singh, Satya Prakash
• Citations: 15 (Details)

• Selective Separation of Light and Heavy Rare Earth Elements from the Pregnant Leach Solution of Apatite Ore with D2EHPA, Journal of Minerals and Materials Characterization and Engineering, Vol.6 No.5, 2018
• Ariuntuya Battsengel, Altansukh Batnasan, Kazutoshi Haga, Atsushi Shibayama
• Citations: 15 (Details)

• Corrosion Behavior of Cenosphere Reinforced Al7075 Metal Matrix Composite
  —An Experimental Approach, Journal of Minerals and Materials Characterization and Engineering, Vol.6 No.3, 2018
• Ravi Kumar D. V.  , Seenappa  , C. R. Prakash Rao, V. Bharat
• Citations: 15 (Details)

• The Potential Use of Natural Clinoptilolite Zeolite for Crude Oil Spill Removal from Sea Water, Journal of Minerals and Materials Characterization and Engineering, Vol.7 No.6, 2019
• Donny N. Kalbuadi, Didiek H. Goenadi, Laksmita P. Santi, Lucky R. Nurtjahja
• Citations: 15 (Details)

• Minimalization of Ash from Iranian Gilsonite by Froth Flotation, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.1, 2021
• Ramona Javadi Doodran, Shayan Khakmardan, Aref Shirazi, Adel Shirazy
• Citations: 15 (Details)

• Physico-Chemical Characterization of Novel Epoxy Matrix System Reinforced with Recycled Short Milled Carbon Fibre, Journal of Minerals and Materials Characterization and Engineering, Vol.3 No.5, 2015
• Sagar T. Cholake, Grainne Moran, Yu Bai, R. K. Singh Raman, X. L. Zhao, Sami Rizkalla, Sri Bandyopadhyay
• Citations: 15 (Details)

• Washability Characteristics of Low Volatile Pakistani Coking Coal by Crushing, Journal of Minerals and Materials Characterization and Engineering, Vol.2 No.5, 2014
• Fahad Mir
• Citations: 15 (Details)

• Influence of Blasting Parameters and Density of Rocks on Blast Performance at Tschudi Mine, Tsumeb, Namibia, Journal of Minerals and Materials Characterization and Engineering, Vol.5 No.6, 2017
• Martin Itoolwa Kulula, Maria Ndeapo Nashongo, Jide Muili Akande
• Citations: 15 (Details)

• MLA-Based Detection of Organic Matter with Iodized Epoxy Resin—An Alternative to Carnauba, Journal of Minerals and Materials Characterization and Engineering, Vol.5 No.4, 2017
• Anne Rahfeld, Jens Gutzmer
• Citations: 15 (Details)

• Metakaolin as an Active Pozzolan for Cement That Improves Its Properties and Reduces Its Pollution Hazard, Journal of Minerals and Materials Characterization and Engineering, Vol.6 No.1, 2018
• Suzan S. Ibrahim, Ayman A. Hagrass, Tawfik R. Boulos, Samir I. Youssef, Fouad I. El-Hossiny, Mohamed R. Moharam
• Citations: 15 (Details)

• Studies on the Growth and Characterization of L-Arginine Maleate Dihydrate Crystal Grown from Liquid Diffusion Technique, Journal of Minerals and Materials Characterization and Engineering, Vol.4 No.2, 2016
• K. Ramya, C. Ramachandra Raja
• Citations: 15 (Details)

• Re-Evaluation of Bovine Fiber Biomass as Exploitable Keratinous Bio-Resource for Biomedical and Industrial Applications, Journal of Minerals and Materials Characterization and Engineering, Vol.5 No.1, 2017
• Isiaka Oluwole Oladele, Jimmy Lolu Olajide, Oluyemi Ojo Daramola, Kofi Bismarck Siaw
• Citations: 14 (Details)

• Effects of Alkaline Additives on the Thermal Behavior and Properties of Cameroonian Poorly Fluxing Clay Ceramics, Journal of Minerals and Materials Characterization and Engineering, Vol.2 No.5, 2014
• Antoine Elimbi, Joseph M. Dika, Chantale N. Djangang
• Citations: 14 (Details)

• The Effects of Firing Temperatures on the Performance of Insulating Firebricks Containing Different Proportions of Alumina and Sawdust, Journal of Minerals and Materials Characterization and Engineering, Vol.3 No.4, 2015
• Davies Oladayo Folorunso, Fatai Olufemi Aramide, Peter Olubambi, Joseph Olatunde Borode
• Citations: 14 (Details)

• Suitability of Foumban Clays (West Cameroon) for Production of Bricks and Tiles, Journal of Minerals and Materials Characterization and Engineering, Vol.6 No.2, 2018
• Abiba Mefire Nkalih, Pascal Pilate, Rose Fouateu Yongue, André Njoya, Nathalie Fagel
• Citations: 14 (Details)

• Corrosion Behavior of Mild Steel and SS 304L in Presence of Dissolved Copper, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.12, 2010
• M. Mobin, Hina Shabnam
• Citations: 14 (Details)

• Influence of Material Condition on the Dry Sliding Wear Behavior of Spring Steels, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.4, 2011
• K. V. Arun, K.V. Swetha
• Citations: 14 (Details)

• Alternative Approaches for Determination of Bond Work Index on Soft and Friable Partially Laterised Khondalite Rocks of Bauxite Mine Waste Materials, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.9, 2009
• Ranjita Swain, R. Bhima Rao
• Citations: 14 (Details)

• Numerical Computations to Produce Cokeable Coal Blends at The Ajaokuta Steel Plant, Nigeria, Journal of Minerals and Materials Characterization and Engineering, Vol.6 No.2, 2007
• A.O. ADELEKE, P. ONUMANYI
• Citations: 14 (Details)

• Revisiting Sphere Unfolding Relationships for the Stereological Analysis of Segmented Digital Microstructure Images, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.3, 2012
• E. J. Payton
• Citations: 14 (Details)

• Evaluation of the Compressive Strength of Hybrid Clay Bricks, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.7, 2011
• O. Azeez, O. Ogundare, T.E. Oshodin, O.A. Olasupo, B.A. Olunlade
• Citations: 14 (Details)

• Prediction of Weld Bead Geometry in Plasma Arc Welding using Factorial Design Approach, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.10, 2011
• K. Siva Prasad, Ch.Srinivasa Rao, D.Nageswara Rao
• Citations: 14 (Details)

• Novel Nondestructive Measurement of Dye Adsorption on Solid Titania Films for Its Sensitized Solar Cells, Journal of Minerals and Materials Characterization and Engineering, Vol.2 No.3, 2014
• Fahd M. Rajab
• Citations: 14 (Details)

• Mineralogical Characterization of Sieved and Un-Sieved Samples, Journal of Minerals and Materials Characterization and Engineering, Vol.2 No.1, 2014
• Rolando Lastra, William Petruk
• Citations: 14 (Details)

• Corrosion Behaviour of Al6061-Frit Particulate Metal Matrix Composites in Sodium Chloride Solution, Journal of Minerals and Materials Characterization and Engineering, Vol.1 No.1, 2013
• Dasappa Ramesh, Ragera Parameshwarappa Swamy, Tumkur Krishnamurthy Chandrashekar
• Citations: 14 (Details)

• Integrated Mineralogical Characterisation of Banded Iron Ores of Orissa and Its Implications on Beneficiation, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.12, 2012
• J. K. Mohanty, M. S. Jena, A. K. Paul
• Citations: 13 (Details)

• Impact of Swelling Indices of Sokoto Clays on the Moulding Properties of the Clays in Sand Mixtures, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.10, 2012
• Ihom A. Paul, Suleiman U. Mohammed, Nyior G. Bem
• Citations: 13 (Details)

• Mechanical Property Estimation of Similar Weld using Ball Indentation Technique, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.11, 2012
• Harshit Kumar Khandelwal, Kamal Sharma, Rahul Chhibber
• Citations: 13 (Details)

• Effect of Normalizing and Hardening on Mechanical Properties of Spring, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.8, 2012
• O. R. Adetunji, P. O. Aiyedun, S. O. Ismaila, M. J. Alao
• Citations: 13 (Details)

• The Effect of Ageing Time on Some Mechanical Properties of Aluminum/0.5% Glass Reinforced Particulate Composite, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.9, 2012
• Aondona .P. Ihom, Nyior .G. Bem, Emmanuel E. Anbua, Joy N. Ogbodo
• Citations: 13 (Details)

• Physico-Mechanical Responses of Polypropylene-CaCO₃ Composite, Journal of Minerals and Materials Characterization and Engineering, Vol.1 No.4, 2013
• Samson Oluropo Adeosun, Mohammed Awwalu Usman, Wasiu Ajibola Ayoola, Muyideen Adebayo Bodud
• Citations: 13 (Details)

• Effect of Electroless Copper Coating on the Corrosion Behavior of Aluminium Based Metal Matrix Composites Reinforced with Silicon Carbide Particles, Journal of Minerals and Materials Characterization and Engineering, Vol.2 No.1, 2014
• Mohamed Zakaulla, A. R. Anwar Khan, P. G. Mukunda
• Citations: 13 (Details)

• Influence of Semi-Solid Isothermal Heat Treatment on Microstructure and Mechanical Properties of Ductile Cast Iron, Journal of Minerals and Materials Characterization and Engineering, Vol.2 No.1, 2014
• Mohamed Ramadan, Naglaa Fathy
• Citations: 13 (Details)

• Synthesis, Growth and Material Characterization of Bis L-Alanine Triethanol Amine (BLATEA) Single Crystals Grown by Slow Evaporation Technique, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.10, 2011
• T. Vela, P. Selvarajan, T. H. Freeda
• Citations: 13 (Details)

• Effect of Heat Treatment on Microstructure and Mechanical Properties of NF6357A Cast Alloy for Wear Resistance Application, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.11, 2011
• J. O. Agunsoye, V. S. Aigbodion, O. S. Sanni
• Citations: 13 (Details)

• Structural Evolution and Properties of Hot Rolled Steel Alloys, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.4, 2012
• Emmanuel Isaac Akpan, Idoko Andrew Haruna
• Citations: 13 (Details)

• Growth, Structural, Spectral and Optical Studies on Pure and L-Alanine Mixed Bisthiourea Cadmium Bromide (LABTCB) Crystals, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.6, 2012
• M. Senthilkumar, C. Ramachandraraja
• Citations: 13 (Details)

• Characterization and Comparison of Saprist and Fibrist Newfoundland Sphagnum Peat Soils, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.7, 2012
• Emmanuel S. Asapo, Cynthia A. Coles
• Citations: 13 (Details)

• Melt Infiltration Casting Of Zr₅₇Al₁₀Nb₅Cu_15.4Ni_12.6 Amorphous Matrix Composite, Journal of Minerals and Materials Characterization and Engineering, Vol.3 No.2, 2004
• K.Q. Qiu, Y.L. Ren
• Citations: 13 (Details)

• Mineralogical Characterization and Beneficiation Studies of Pyrophyllite from Orissa, India, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.4, 2009
• B. Das, J.K. Mohanty
• Citations: 13 (Details)

• Scanning Electron Microscopy of Some Slowly Cooled Nickel-Based Hardfacing Alloys Containing Iron Additions, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.2, 2010
• J. A. Ajao
• Citations: 13 (Details)

• Determination of Bond index of Birnin- Gwari Iron Ore in Nigeria, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.7, 2010
• K.J. Olatunji, A.G. Durojaiye
• Citations: 13 (Details)

• Hydrometallurgical Processing of a Nigerian Galena Ore in Nitric Acid: Characterization and Dissolution Kinetics, Journal of Minerals and Materials Characterization and Engineering, Vol.6 No.3, 2018
• Ikechukwu A. Nnanwube, Okechukwu D. Onukwuli
• Citations: 13 (Details)

• ANN Based Predictive Modelling of Weld Shape and Dimensions in Laser Welding of Galvanized Steel in Butt Joint Configurations, Journal of Minerals and Materials Characterization and Engineering, Vol.6 No.3, 2018
• Laurent Jacques, Abderrazak El Ouafi
• Citations: 13 (Details)

• Mineralogy of Iron Ores of Different Alumina Levels from Singhbhum Belt and Their Implication on Sintering Process, Journal of Minerals and Materials Characterization and Engineering, Vol.3 No.3, 2015
• Moni Sinha, Sri Harsha Nistala, Sanjay Chandra, Tilak Raj Mankhand
• Citations: 13 (Details)

• Production and Characterization of Pozzolan with Raw Clay from Burkina Faso, Journal of Minerals and Materials Characterization and Engineering, Vol.4 No.3, 2016
• Mohamed Seynou, Younoussa Millogo, Lamine Zerbo, Issiaka Sanou, François Ganon, Raguilnaba Ouedraogo, Kalsibiri Kaboré
• Citations: 13 (Details)

• Role of Microstructural Features in Toughness Improvement of Zirconia Toughened Alumina, Journal of Minerals and Materials Characterization and Engineering, Vol.4 No.1, 2016
• Olaniyi Fakolujo, Ali Merati, Mariusz Bielawski, Manon Bolduc, Michel Nganbe
• Citations: 12 (Details)

• Evaluation of Cost Effectiveness of Onibode Fire-Clay for Production of High Quality Refractory Bricks, Journal of Minerals and Materials Characterization and Engineering, Vol.3 No.5, 2015
• David Ehigie Esezobor, Friday Ichifu Apeh, Mfon Okon Udo, Mustapha Fabiyi, Enebi Solomon Apeh
• Citations: 12 (Details)

• Recovery of Iron Values from Waste Manganiferous Iron Ore Fines for Pellet Making, Journal of Minerals and Materials Characterization and Engineering, Vol.2 No.5, 2014
• Shobhana Dey, Manoj Kumar Mohanta, Manik Chand Goswami, Santosh Pani
• Citations: 12 (Details)

• Design and Performance Evaluation of a Sustained Load Dual Grip Creep Testing Machine, Journal of Minerals and Materials Characterization and Engineering, Vol.2 No.6, 2014
• Kenneth Kanayo Alaneme, Bethel Jeremiah Bamike, Godwin Omlenyi
• Citations: 12 (Details)

• Model for Quantitative Analysis of Phosphorus Removed during Leaching of Iron Oxide Ore in Oxalic Acid Solution, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.4, 2010
• C. I. Nwoye, C. N. Mbah, C. C. Nwakwuo, A. I. Ogbonna
• Citations: 12 (Details)

• Effect of Draw Ratio and Sheet Thickness on Earing and Drawability of Al 1200 Cups, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.5, 2010
• O.O. Oluwole, C.O. Anyaeche, O.V. Faola
• Citations: 12 (Details)

• Högbomite Associated with Vanadium bearing Titaniferous Magnetite of Mafic-Ultramafic Suite of Moulabhanj Igneous Complex, Orissa, India, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.9, 2009
• D. Beura, D. Acharya, P. Singh, S. Acharya
• Citations: 12 (Details)

• Synthesis, Structural and Dielectric Properties of Ferroelectric Dichloridoglycine Zinc Dihydrate Single Crystals, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.4, 2011
• S. Suresh, A. Ramanand, D. Jayaraman, S.M. Priya, R. Vasanthakumari
• Citations: 12 (Details)

• Hot Corrosion Behaviour of Yttria-Stabilised Zirconia as Plasma Sprayed Coated Boiler Steel in Air and Salt at 900°C under Cyclic Condition, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.5, 2011
• Dinesh Gond, D. Puri, S. Prakash
• Citations: 12 (Details)

• Growth of Strontium Chromium Magnesium Hydrogen Phosphate (SrCrMHP) Crystal in Silica Gel Medium at Different Growth Environments and Nucleation Reduction Strategy, Journal of Minerals and Materials Characterization and Engineering, Vol.7 No.3, 2008
• G. Kanchana, P. Suresh, P. Sundaramoorthi, S. Kalainathan, G.P. Jeyanthi
• Citations: 12 (Details)

• Iron Ore Beneficiation with Packed Column Jig, Journal of Minerals and Materials Characterization and Engineering, Vol.2 No.1, 2003
• D.C. Yang, P. Bozzato, G. Ferrara
• Citations: 12 (Details)

• Adaptable Technologies for Life – Cycle Processing of Tantalum Bearing Minerals, Journal of Minerals and Materials Characterization and Engineering, Vol.6 No.1, 2007
• M. O. H. Amuda, D. E. Esezobor, G. I. Lawal
• Citations: 12 (Details)

• Carbonate Coatings as Protective Barriers for Pipe Borne Water Transport Material, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.6, 2012
• Lasisi Ejibunu Umoru, Abimbola Oladipo, Oladeji Oluremi Ige
• Citations: 12 (Details)

• Growth and Characterization of Non-Linear Optical Material, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.12, 2011
• G.R. Dillip, C. Madhukar Reddy, B. Deva Prasad Raju
• Citations: 12 (Details)

• Development and Calibration of a Quantitative, Automated Mineralogical Assessment Method Based on SEM-EDS and Image Analysis: Application for Fine Tailings, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.12, 2011
• R. Mermillod-Blondin, M. Benzaazoua, M. Kongolo, P. de Donato, B. Bussière, P. Marion
• Citations: 12 (Details)

• Impact of pH Variation on Coag-flocculation Behaviour of Chitin Derived Coag-flocculant in Coal Washery Effluent Medium, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.15, 2011
• M.C. Menkiti, O.D. Onukwuli
• Citations: 12 (Details)

• Development Processes of Globular Microstructure, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.7, 2011
• A.V. Adedayo
• Citations: 12 (Details)

• Studies on Cold Workability Limits of Brass Using Machine Vision System and its Finite Element Analysis, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.9, 2011
• J. Appa Rao, J. Babu Rao, Syed Kamaluddin, NRMR Bhargava
• Citations: 12 (Details)

• Studies in Effect of Low Concentration of Cenosphere on Mechanical, Thermal, Electrical, Crystallinity, Colorimetric and Morphological Properties of Epoxy Cured with Triethylenetetramine, Journal of Minerals and Materials Characterization and Engineering, Vol.1 No.4, 2013
• Pravin Kadam, Bhushan Pawar, Shashank Mhaske
• Citations: 12 (Details)

• Towards the Recovery of By-Product Metals from Mine Wastes: An X-Ray Absorption Spectroscopy Study on the Binding State of Rhenium in Debris from a Centennial Iberian Pyrite Belt Mine, Journal of Minerals and Materials Characterization and Engineering, Vol.2 No.2, 2014
• Maria-Ondina Figueiredo, Teresa Pereira da Silva, João Pedro Veiga, Daniel de Oliveira, Maria João Batista
• Citations: 11 (Details)

• Statistical Analysis for the Abrasive Wear Behavior of Al 6061, Journal of Minerals and Materials Characterization and Engineering, Vol.2 No.4, 2014
• Mohd Shadab Khan, Zahir Hasan, Yaqoob Ali Ansari
• Citations: 11 (Details)

• Development and Characterization of Fe-Based Friction Material Made by Hot Powder Preform Forging for Low Duty Applications, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.13, 2011
• A.A.S. Ghazi, K. Chandra, P.S. Misra
• Citations: 11 (Details)

• Elastic Properties of Clinopyroxene Based Glasses along Diopside (CaMgSi₂O₆)-Jadeite (NaAlSi₂O₆) Join, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.3, 2012
• Rinkel Jindal, Widiya Jatmiko, Indra Vir Singh, R. Jayaganthan
• Citations: 11 (Details)

• Thermal, Hardness and Microstructural Characterization of Al-Si-SiC_p Composites, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.2, 2012
• O. A. Alo, L. E. Umoru, J. A. Ajao, K. M. Oluwasegun
• Citations: 11 (Details)

• Mica Filled PVC Composites: Performance Enhancement in Dielectric and Mechanical Properties with Treated/Untreated Mica of Different Particle Size and Different Concentration, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.2, 2012
• S. P. Deshmukh, A. C. Rao
• Citations: 11 (Details)

• Assessment of Some Nigerian Coals for Metallurgical Application, Journal of Minerals and Materials Characterization and Engineering, Vol.7 No.4, 2008
• I. O. Akpabio, M. M. Chagga, A. Jauro
• Citations: 11 (Details)

• Evaluation for the Beneficiability of Yellow Silica Sands from the Overburden of Lignite Mine situated in Rajpardi district of Gujarat, India, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.7, 2009
• M. Sundararajan, S. Ramaswamy, P. Raghavan
• Citations: 11 (Details)

• Optimizing Utilization of Petroleum Coke in Nigerian Metallurgical Industry, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.3, 2011
• E.J. Akpabio, O.W. Obot
• Citations: 11 (Details)

• Corrosion Characteristics of Ascast Ductile Iron in Lime Juice, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.10, 2010
• F.O. Aramide, E.O. Olorunniwo, P.O. Atanda, J.O. Borode
• Citations: 11 (Details)

• Effect of V-Ti on the Microstructure and Abrasive Wear Behavior of 6CrC Cast Steel Mill Balls, Journal of Minerals and Materials Characterization and Engineering, Vol.2 No.5, 2014
• S. I. Maldonado-Ruiz, P. Orozco-González, V. H. Baltazar-Hernández, A. Bedolla-Jacuinde, M. A. L. Hernández-Rodríguez
• Citations: 11 (Details)

• Enhancement of Dimensional Stability of Rigid PVC Foams Using E-Glass Fibers, Journal of Minerals and Materials Characterization and Engineering, Vol.3 No.2, 2015
• Murtatha M. Jamel, Parisa Khoshnoud, Subhashini Gunashekar, Nidal Abu-Zahra
• Citations: 11 (Details)

• Strength Characteristics of Inoculated and Nodularised Thin Wall Ductile Iron Castings, Journal of Minerals and Materials Characterization and Engineering, Vol.3 No.2, 2015
• Ezenwanyi Fidelia Ochulor, Samson Oluropo Adeosun, Mohammed Olawale Hakeem Amuda, Sanmbo Adewale Balogun
• Citations: 11 (Details)

• Determination of Work Index of Gyel-Bukuru Columbite Ore in Plateau State, Nigeria, Journal of Minerals and Materials Characterization and Engineering, Vol.3 No.3, 2015
• Oladunni Oyelola Alabi, Shehu Aliyu Yaro, George Thomas Dungka, Ferdinand Asuke, Emmanuel Toi Dauda
• Citations: 11 (Details)

• Preparation and Characterization of ZnSe/EVA Nanocomposites for Photovoltaic Modules, Journal of Minerals and Materials Characterization and Engineering, Vol.3 No.4, 2015
• Jose Sebastian, Eby Thomas Thachil, Jobin Job Mathen, Augustine J. Edakkara, Nelson Kuriakose, Ginson P. Joseph, Joby Sebastian
• Citations: 11 (Details)

• Evaluation and Optimization of Tensile Strength Responses of Coir Fibres Reinforced Polyester Matrix Composites (CFRP) Using Taguchi Robust Design, Journal of Minerals and Materials Characterization and Engineering, Vol.3 No.4, 2015
• Ugochukwu Chuka Okonkwo, Christian Ebele Chukwunyelu, Bright Uchenna Oweziem, Okunzuwa Austine Ekuase
• Citations: 11 (Details)

• Effects of Processing Methods on Mechanical Properties of Alkali Treated Bagasse Fibre Reinforced Epoxy Composite, Journal of Minerals and Materials Characterization and Engineering, Vol.6 No.3, 2018
• Geoffrey Bem Nyior, Ekene Chukwuka Mgbeahuru
• Citations: 11 (Details)

• Cure Characteristics and Mechanical Properties of Pineapple Leaf Fibre Filled Natural Rubber, Journal of Minerals and Materials Characterization and Engineering, Vol.6 No.6, 2018
• Chinenye C. Ekwueme, Isaac O. Igwe
• Citations: 11 (Details)

• Experimental Investigation of Laser Surface Hardening of AISI 4340 Steel Using Different Laser Scanning Patterns, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.2, 2020
• Baha Tarchoun, Abderrazak El Ouafi, Ahmed Chebak
• Citations: 11 (Details)

• An Experimental Study on the Use of Fonio Straw and Shea Butter Residue for Improving the Thermophysical and Mechanical Properties of Compressed Earth Blocks, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.3, 2020
• Etienne Malbila, Simon Delvoie, David Toguyeni, Shady Attia, Luc Courard
• Citations: 10 (Details)

• Removal of Pigments from Palm Oil Using Activated Ibusa Kaolinite: Equilibrium, Kinetic and Thermodynamic Studies, Journal of Minerals and Materials Characterization and Engineering, Vol.7 No.4, 2019
• Vincent Nwoye Okafor, Ikechukwu Abuchi Nnanwube, John Ifeanyi Obibuenyi, Okechukwu Dominic Onukwuli, Regina Obiageli Ajemba
• Citations: 10 (Details)

• Investigating the Industrial Potentials of Some Selected Nigerian Clay Deposits, Journal of Minerals and Materials Characterization and Engineering, Vol.6 No.6, 2018
• Lydia Solomon Jongs, Alexander Asanja Jock, Okon Eno Ekanem, Aliyu Jauro
• Citations: 10 (Details)

• Synthesis and Thermoelectric Property of 1D Flexible PEDOT: p-TSA/Glass Fiber, Journal of Minerals and Materials Characterization and Engineering, Vol.6 No.3, 2018
• Xiaohua Chen, Guangshi Tang, Junqing Pan, Hanfu Wang
• Citations: 10 (Details)

• Modeling and Optimization of Galena Dissolution in Hydrochloric Acid: Comparison of Central Composite Design and Artificial Neural Network, Journal of Minerals and Materials Characterization and Engineering, Vol.6 No.3, 2018
• Ikechukwu A. Nnanwube, Okechukwu D. Onukwuli, Sunday U. Ajana
• Citations: 10 (Details)

• Electrical Conductivity of Spark Plasma Sintered W-Cu and Mo-Cu Composites for Electrical Contact Applications, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.1, 2021
• N. I. Amalu, B. A. Okorie, J. C. Ugwuoke, C. S. Obayi
• Citations: 10 (Details)

• Monazite Recovery by Magnetic and Gravity Separation of Medium Grade Zircon Concentrate from Senegalese Heavy Mineral Sands Deposit, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.6, 2021
• Moumar Dieye, Mohamadou Moustapha Thiam, Anthony Geneyton, Mamadou Gueye
• Citations: 10 (Details)

• Progress in Preparation and Application of Fabric Electrodes, Journal of Minerals and Materials Characterization and Engineering, Vol.2 No.6, 2014
• Yunqi Zhai, Xiaoxia Liu, Ya Wang, Xiao Li
• Citations: 10 (Details)

• Characterization of Surface State of Inert Particles: Case of Si and SiC, Journal of Minerals and Materials Characterization and Engineering, Vol.4 No.1, 2016
• Désiré M. K. Abro, Pierre Dablé, Fernando Cortez-Salazar, Véronique Amstutz, Hubert Girault
• Citations: 10 (Details)

• Electroslag Refining of CrNiMoWMnV Ultrahigh-Strength Steel, Journal of Minerals and Materials Characterization and Engineering, Vol.5 No.6, 2017
• Mohammed Ali, Mamdouh Eissa, Hoda El Faramawy, David Porter, Jukka Kömi, M. F. El-Shahat, Taha Mattar
• Citations: 10 (Details)

• Characterization and Utilization of Eziulo Clay as an Extender in Emulsion Paint Formulations, Journal of Minerals and Materials Characterization and Engineering, Vol.5 No.4, 2017
• Isaac O. Igwe, Gift Osuoha, Chinedu Nwapa
• Citations: 10 (Details)

• Adsorption Kinetics and Evaluation Study of Iron Oxide Nanoparticles Impregnated in Polyurethane Matrix for Water Filtration Application, Journal of Minerals and Materials Characterization and Engineering, Vol.5 No.5, 2017
• Faten B. Hussein, Nidal H. Abu-Zahra
• Citations: 10 (Details)

• Effect of Silicon on the Corrosion Behavior of Powder-Processed Phosphoric Irons, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.10, 2010
• Yashwant Mehta, Shefali Trivedi, K. Chandra, P.S. Mishra
• Citations: 10 (Details)

• Growth and Characterization of L-glutamic Acid Hydro Chloro Bromide,A New Nonlinear Optical Material, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.1, 2011
• S. Kumararaman, K. Kirubavathi, K. Selvaraju
• Citations: 10 (Details)

• Influence of Mould Heat Storage Capacity on Properties of Grey Iron, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.4, 2011
• A.V. Adedayo, B. Aremo
• Citations: 10 (Details)

• Solubility of Supercritical CO₂ in Polystyrene during Foam Formation via Statistical Associated Fluid Theory (SAFT) Equation of State, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.5, 2010
• Brian A. Ott, G. Caneba
• Citations: 10 (Details)

• Plane Strain Fracture Behaviour of Fabric Reinforced Hybrid Composites under varied Notch Configurations, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.6, 2009
• K. Mohamed Kaleemulla, B. Siddeswarappa
• Citations: 10 (Details)

• Mathematical Model for Optimizing Charge and Heel Levels in Steel Remelting Induction Furnace for Foundry Shop, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.6, 2009
• O.K. Abubakre, R.A. Muriana
• Citations: 10 (Details)

• The Effect of Sulfurization Process on Flotation of Copper Ore Containing Gold and Silver, Journal of Minerals and Materials Characterization and Engineering, Vol.7 No.3, 2008
• Ibrahim TEGIN, Recep ZIYADANOGULLARI
• Citations: 10 (Details)

• Column Leaching for Simulating Heap and In-situ Soil Remediation with Metallic Fenton Reaction, Journal of Minerals and Materials Characterization and Engineering, Vol.3 No.1, 2004
• H. K. Lin, H. V. Luong
• Citations: 10 (Details)

• Polymer in Sustainable Energy, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.7, 2012
• Darshan Patel, S. P. Deshmukh
• Citations: 10 (Details)

• Growth of Pure and Mo Doped Potassium Titanyl Phosphate (KTP) Crystals:Influence of KTP/Flux Ratios on the Growth Morphology, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.8, 2011
• J. Rajeev Gandhi, B. Vijayalakshmi, M. Rathnakumari, P. Sureshkumar
• Citations: 10 (Details)

• Fabrication of End Quenched Machine: Hardenability Evaluation, Journal of Minerals and Materials Characterization and Engineering, Vol.2 No.2, 2014
• A. A. Yekinni, J. O. Agunsoye, S. A. Bello, I. O. Awe, S. I. Talabi
• Citations: 10 (Details)

• The Study of the Antimicrobial Properties of Selected Engineering Materials’ Surfaces, Journal of Minerals and Materials Characterization and Engineering, Vol.2 No.2, 2014
• Olawale Samuel Fatoba, David Ehigie Esezobor, Olaitan Lukman Akanji, Abiodun Joseph Fatoba, Damilola Macgregor, John Etubor
• Citations: 10 (Details)

• Finite Element Modeling of Stress Strain Curve and Micro Stress and Micro Strain Distributions of Titanium Alloys— A Review, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.10, 2012
• Gangi Setti Srinivasu, Narasimha Rao Raja
• Citations: 10 (Details)

• Application of High Tension Roll Separator for the Separation of Titanium Bearing Minerals: Process Modeling and Optimization, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.10, 2012
• Srijith Mohanan, Sunil Kumar Tripathy, Y. Ramamurthy, C. Raghu Kumar
• Citations: 10 (Details)

• Model for Assessment Evaluation of Methane Gas Yield Based on Hydraulic Retention Time during Fruit Wastes Biodigestion, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.10, 2012
• Chukwuka Nwoye, Asuke Ferdinand, Ijomah Agatha, Obiorah Samuelmary
• Citations: 9 (Details)

• Electrodeposition of Cyclic Multilayer Zn-Co Films Using Square Current Pulses and Investigaions on Their Corrosion Behaviors, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.9, 2012
• Ramesh S. Bhat, A. Chitaranjan Hegde
• Citations: 9 (Details)

• Application of Hooke & Jeeves Algorithm in Optimizing Fusion Zone Grain Size and Hardness of Pulsed Current Micro Plasma Arc Welded AISI 304L Sheets, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.9, 2012
• Kondapalli Siva Prasad, Chalamalasetti Srinivasa Rao, Damera Nageswara Rao
• Citations: 9 (Details)

• Analysis on Some Physical and Chemical Properties of Oreke Dolomite Deposit, Journal of Minerals and Materials Characterization and Engineering, Vol.1 No.2, 2013
• Jide Muili Akande, Sunday Ayodele Agbalajobi
• Citations: 9 (Details)

• Potentials of Bambusa vulgaris Grown in Southeast Nigeria for the Manufacture of Wood-Cement Composite Panels, Journal of Minerals and Materials Characterization and Engineering, Vol.2 No.5, 2014
• Eugene O. Onuorah, Elias Chukwunonso Nnabuife, Joseph T. Nwabanne
• Citations: 9 (Details)

• 2^k Factorial Experiments on Factors that Influence the Recovery of Gold during the Upgrade of Ilesha-Itagunmodi Gold Ore through Froth Flotation, Journal of Minerals and Materials Characterization and Engineering, Vol.2 No.1, 2014
• Kayode Emmanuel Oluwabunmi, Abraham Adewale Adeleke, Adelana Razak Adetunji, Samson Olaitan Jeje, Abiodun Ayodeji Abioye, Olusola Adedayo Adesina, Fatai Afolabi Ayeni, Folahan Peter Ibitoye
• Citations: 9 (Details)

• Effect of Toluene and Dioctylphthalate on the Rebar Corrosion of Medium Carbon Steel in Seawater and Cassava Fluid, Journal of Minerals and Materials Characterization and Engineering, Vol.2 No.1, 2014
• Mohammed Adamu, Lasisi Ejibunu Umoru, Oladeji Oluremi Ige
• Citations: 9 (Details)

• Study the Effect of Polymeric Quenching on Wear Resistance of Eutectic Modified Aluminium – Silicon Alloy, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.10, 2011
• Kahtan K. Al-Khazraji, Waleed A. Hanna, Osama S. Muhammed
• Citations: 9 (Details)

• Laboratory Studies on Phosphorus Removal from Nigeria’s Agbaja Iron Ore by Bacillus Subtilis, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.9, 2011
• C. N. Anyakwo, O.W. Obot
• Citations: 9 (Details)

• High Temperature Oxidation and Hot Corrosion Behaviour of 9Cr 1Mo Ferritic Cold Rolled Steel in Air at 900°C under Cyclic Condition, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.11, 2011
• Amarish K. Shukla, Dinesh Gond, M. Bharadwaj, D. Puri
• Citations: 9 (Details)

• Influence of Picric Acid on the SHG Efficiency of L-Prolinium Tartrate Crystals, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.10, 2011
• S. Natarajan, K. Moovendaran, J. Kalyana Sundar, G. Bhagavannarayana, S.A. Martin Britto Dhas
• Citations: 9 (Details)

• Growth, Structural, Optical, Mechanical and Dielectric Characterization of Diammonium Hydrogen Phosphate (DAHP) Single Crystals, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.15, 2011
• P. Selvarajan, N. Joseph John, C.K. Mahadevan
• Citations: 9 (Details)

• Influence of Sputter Deposition Time on the Growth of c-Axis Oriented AlN/Si Thin Films for Microelectronic Application, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.7, 2012
• V. VasanthiPillay, K. Vijayalakshmi
• Citations: 9 (Details)

• Effects of Stamped Charging on the Strength of Coke from the Weakly Caking Australian Agro-Allied Coal Blend Mixed with Coke Breeze, Journal of Minerals and Materials Characterization and Engineering, Vol.7 No.4, 2008
• A.B. Adahama, A.O Adeleke, A.O. Olulana, S.A. Ibitoye
• Citations: 9 (Details)

• Finite Element Modeling of Heat Transfer in Salt Bath Furnaces, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.3, 2009
• O.O. Oluwole, P.O. Atanda, B.I. Imasogie
• Citations: 9 (Details)

• Studies on Weldability of Powder-Processed Fe-0.35P-0.15C Alloy Using Gas Tungsten Arc Welding Process, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.3, 2010
• Yashwant Mehta, Shefali Trivedi, K. Chandra, P.S. Mishra
• Citations: 9 (Details)

• Alternate Environmentally Friendly De-Painting Process for Aircraft Structures-Atmospheric Plasma, Journal of Minerals and Materials Characterization and Engineering, Vol.5 No.4, 2017
• Ali Merati, Marko Yanishevsky, Tessa Despinic, Philip Lo, Vladimir Pankov
• Citations: 9 (Details)

• Microstructure Evolution of a Nickel-Base Alloy Resistant to High Temperature during Aging, Journal of Minerals and Materials Characterization and Engineering, Vol.4 No.1, 2016
• Alberto Carlos Picasso, César Armando Lanz, Matías Sosa Lissarrague, Aldo Daniel Garófoli
• Citations: 9 (Details)

• Optimization of Process Parameter for Sawdust/Recycled Polyethylene Composites, Journal of Minerals and Materials Characterization and Engineering, Vol.4 No.4, 2016
• Clement U. Atuanya, Chizoba M. Obele
• Citations: 9 (Details)

• A Comparative Study on Dry Sliding Wear Characteristics of Al₂O₃ and Bone Powder Filled Hybrid Composites, Journal of Minerals and Materials Characterization and Engineering, Vol.4 No.2, 2016
• Sudeep Deshpande, T. Rangaswamy
• Citations: 9 (Details)

• Carbothermic Reduction Kinetics of Ka’oje (Nigeria) Manganese Ore, Journal of Minerals and Materials Characterization and Engineering, Vol.2 No.5, 2014
• R. A. Muriana, E. Muzenda, O. K. Abubakre
• Citations: 9 (Details)

• Study on Natural Minerals Applying in Developing New Health Textiles, Journal of Minerals and Materials Characterization and Engineering, Vol.3 No.4, 2015
• Xiaohong Shen, Xiangji Wu, Hailing Wei, Weiping Du
• Citations: 9 (Details)

• Implementation and Evaluation of Certain Properties of a Polymer Matrix Composite Material Reinforced by Fibrous Residues of Saccharum officinarum in View of an Applicability Orientation, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.2, 2021
• Marie Josette Ndengue, Merlin Zacharie Ayissi, Pierre Marcel Anicet Noah, Fabien Betene Ebanda, Atangana Ateba
• Citations: 9 (Details)

• Characterisation of Geomechanical Properties of Bentonite Clay Used for Plug and Abandonment Operations of Coal Seam Gas Wells, Journal of Minerals and Materials Characterization and Engineering, Vol.6 No.2, 2018
• Heinz-Gerd Holl, Alexander Scheuermann
• Citations: 9 (Details)

• Structural Role of Cerium Oxide in Lead Silicate Glasses and Glass Ceramics, Journal of Minerals and Materials Characterization and Engineering, Vol.6 No.3, 2018
• Gomaa El-Damrawi, Amal Behairy
• Citations: 9 (Details)

• Study of the Mechanical Behaviour of Mortars Modified with Rice Husk Ash, Journal of Minerals and Materials Characterization and Engineering, Vol.7 No.6, 2019
• Issiaka Sanou, Moustapha Sawadogo, Mohamed Seynou, Lamine Zerbo, Raguilnaba Ouedraogo
• Citations: 9 (Details)

• Preparation of Activated Carbons from Mongolian Lignite and Sub-Bituminous Coal by a Physical Method, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.3, 2020
• Uugantsetseg Gombojav, Irekhbayar Jambal, Enkhsaruul Byambajav
• Citations: 8 (Details)

• Experimental Investigation of Mechanical Properties of Impact Modified Polyvinyl Chloride-Fly Ash Composites, Journal of Minerals and Materials Characterization and Engineering, Vol.7 No.1, 2019
• Pramod Shriniwas Joshi, Deepti Sanjiv Marathe
• Citations: 8 (Details)

• Influence of Boron Fiber Powder and Graphite Reinforcements on Physical and Mechanical Properties of Aluminum 2024 Alloy Fabricated by Stir Casting, Journal of Minerals and Materials Characterization and Engineering, Vol.7 No.3, 2019
• H. S. Kumaraswamy, Vinjamuri Bharat, T. Krishna Rao
• Citations: 8 (Details)

• Physicochemical and Mineralogical Characterizations of Wastes Coming from Phosphate Ore Processing of Hahotoé and Kpogamé Mines, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.4, 2021
• Moursalou Koriko, Dodji Zounon, Sanonka Tchegueni, Diyadola Dihéénane Bafai, Koffi Agbegnigan Degbe, Koffi Fiaty, Patrick Drogui, Gado Tchangbedji
• Citations: 8 (Details)

• Identification of Optimum Composition and Mechanical Properties of Al-Ni Metal Matrix Composite, Journal of Minerals and Materials Characterization and Engineering, Vol.3 No.4, 2015
• Manoj Kumar Pal, Simranjeet Singh Sandhu, Rohan Kalia, Arka Ghosh
• Citations: 8 (Details)

• Microstructural, Chemical and Mineralogical Analyses for Understanding the Geotechnical Properties of Clayey Soils, Journal of Minerals and Materials Characterization and Engineering, Vol.4 No.6, 2016
• Yvette Tankpinou Kiki, Nadia Saiyouri, Victor Gbaguidi, Yannick Anguy, Cécile Gaborieau, Richard Fabre
• Citations: 8 (Details)

• The Effect of Atmospheric Plasma Paint Stripping on the Fatigue Crack Growth Properties of Aluminium Substrates, Journal of Minerals and Materials Characterization and Engineering, Vol.5 No.4, 2017
• Ali Merati, Marko Yanishevsky, Tessa Despinic, Philip Lo
• Citations: 8 (Details)

• Quadratic Model for Predicting the Hardness of Heat Affected Zone in Water Cooled Cast Iron Weldment In Relation to Similarly Cooled Aluminum and Mild Steel Weldments, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.10, 2009
• C. I. Nwoye
• Citations: 8 (Details)

• Model for Predicting the Quantity of Water Evaporated during Initial Stage Drying of Wet Clay Designated for Production of Bricks, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.8, 2009
• C. I. Nwoye
• Citations: 8 (Details)

• Growth and Characterization of Urea Adduct with m-Nitrobenzoic Acid,m-Nitroaniline, and p-Xylene Mixtures, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.5, 2010
• P. Jagdish, N.P. Rajesh, S. Natarajan
• Citations: 8 (Details)

• Microstructural Study of Heat Treated Chromium Alloyed Grey Cast Iron, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.3, 2010
• P. Atanda, A. Okeowo, O. Oluwole
• Citations: 8 (Details)

• Influence of Processing Parameters on the Magnetic Properties of Mn-Zn Ferrites, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.5, 2011
• S. A. El-Badry
• Citations: 8 (Details)

• The Effect of Time, Percent of Copper and Nickel on the Natural Precipitation Hardness of Al – Cu – Ni Powder Metallurgy Alloys Using Design of Experiments, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.6, 2011
• Mohammad M. Hamasha, Ahmad T. Mayyas, Mohammed T. Hayajneh, Adel M. Hassan
• Citations: 8 (Details)

• Post Heat Treatment of Plasma Sprayed Pure and Alumina-Titania Reinforced Hydroxyapatite Coating on SS 304 Steel, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.2, 2011
• Gurbhinder Singh, Surendra Singh, Satya Prakash
• Citations: 8 (Details)

• Synthesis, Growth and Characterization of 4-Benzeneazoaniline Single Crystal, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.11, 2010
• T. Kishore Kumar, S. Janarthanan, S. Pandi, M. Victor Antony Raj, Kanagalakshmi  , D. Prem Anand
• Citations: 8 (Details)

• Some Preliminary Metallurgical Studies on Grain Size and Density of Work Material used in Micro Turning Operation, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.9, 2010
• A. S. Patil, H. K. Dave, R. Balasubramaniam, K. P. Desai, H. K. Raval
• Citations: 8 (Details)

• Enrichment of Cobalt Values by Dry Magnetic Separation from Low-Grade Manganese Ores of Bonai-Keonjhar Belt, Orissa, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.4, 2009
• P. P. Mishra, B. K. Mohapatra, P. P. Singh
• Citations: 8 (Details)

• Model for Predictive Analysis of Heat Absorbed by Oxalic Acid Solution Relative to the Solution Temperature during Leaching of Iron Oxide Ore, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.7, 2009
• C. I. Nwoye, C. S. Nwobodo, C. Nlebedim, U.C. Nwoye, R. A. Umana, G. C. Obasi
• Citations: 8 (Details)

• Metallurgical Use of Heat Altered Coal: A Case Study, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.7, 2009
• Debjani Nag, A.K. Singh, P.K. Banerjee
• Citations: 8 (Details)

• Comparative Study of Pure and Magnesium Doped Cadmium Mercury Thiocyanate Single Crystals – Gel Technique, Journal of Minerals and Materials Characterization and Engineering, Vol.7 No.4, 2008
• P. Nisha Santha Kumari, S. Kalainathan
• Citations: 8 (Details)

• Characterization and Transport of Contaminated Sediments in the Southern Central Lake Superior, Journal of Minerals and Materials Characterization and Engineering, Vol.2 No.2, 2003
• Jaebong Jeong, S. Douglas McDowell
• Citations: 8 (Details)

• Enrichment of U, Mo, V, Ni and Ti from asphaltite ash, Journal of Minerals and Materials Characterization and Engineering, Vol.4 No.1, 2005
• Işıl Aydın, Fırat Aydın, Recep Ziyadanoğulları
• Citations: 8 (Details)

• Processing of the Pyrite Concentrates to Generate Sulfurous Anhydride for Sulfuric Acid Production, Journal of Minerals and Materials Characterization and Engineering, Vol.6 No.2, 2007
• T.A. Chepushtanova, V.A. Luganov
• Citations: 8 (Details)

• The Influence of Benzophenone Substitution on the Physico-Chemical Characterizations of 8-HydroxyQuinoline NLO Single Crystals, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.8, 2012
• M.J.Jarald Brigit Gilda, S. Anbarasu, Y. Samson, PremAn Devarajan
• Citations: 8 (Details)

• Effects of Austenitising Conditions on the Microstructures and Mechanical Properties of Martensitic Steel with Dual Matrix Structure, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.1, 2012
• K.A. Bello, S.B. Hassan, O. Aponbiede
• Citations: 8 (Details)

• The Effect of Phosphate Mixing on Structural, Spectroscopic, Mechanical and Optical Properties of Zinc tris Thiourea Sulphate (ZTS) Single Crystals, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.5, 2012
• A. Puhal Raj, C. Ramachandra Raja
• Citations: 8 (Details)

• Influence of Nano-Modification on the Interlaminar Shear Strength of Unidirectional Glass Fiber-Reinforced Epoxy Resin, Journal of Minerals and Materials Characterization and Engineering, Vol.2 No.4, 2014
• M. Rajanish, N. V. Nanjundaradhya, Ramesh S. Sharma
• Citations: 8 (Details)

• Studies on Extraction Behaviour of Cobalt(II) with Nitrobenzoylprazolone-5, Journal of Minerals and Materials Characterization and Engineering, Vol.1 No.3, 2013
• Onyedika Gerald, Arinze Judith, Ogwuegbu Martin
• Citations: 8 (Details)

• Influence of Microstructure on Beneficiation of Low-Grade Siliceous Manganese Ore from Orissa, India, Journal of Minerals and Materials Characterization and Engineering, Vol.1 No.3, 2013
• Patitapaban Mishra, Birendra Kumar Mohapatra, Pradeep Kumar Mallick, Khageswar Mahanta
• Citations: 8 (Details)

• Growth and Characterization of β-Alanine Oxalate—A New Organic Single Crystal, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.11, 2012
• S. Lincy Mary Ponmani, P. Selvarajan, N. Balasundari, D. Jencylin
• Citations: 7 (Details)

• Heat Treatment Effect on Microstructure and Mechanical Properties of Re-Containing Inconel 718 Alloy, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.9, 2012
• Nader El-Bagoury, Mohamed Ramadan
• Citations: 7 (Details)

• Physico-Chemical Characterization and Speciation of Sulphur of Nigerian Coal Samples, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.10, 2012
• Folahan A. Adekola, Alafara A. Baba, Sherifat Buhari
• Citations: 7 (Details)

• Effect of Calcium Nitrate and Sodium Nitrite on the Rebar Corrosion of Medium Carbon Steel in Seawater and Cassava Fluid, Journal of Minerals and Materials Characterization and Engineering, Vol.2 No.3, 2014
• Mohammed Adamu, Lasisi Ejibunu Umoru, Oladeji Oluremi Ige
• Citations: 7 (Details)

• Hydrometallurgical Purification of Some Clay Deposits for High Temperature Applications, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.5, 2012
• D.O. FOLORUNSO, S. ARIBO, P. O. OLUBAMBI, J.O. BORODE
• Citations: 7 (Details)

• Energy Absorption and Strength Evaluation for Compressed Glass Fibre Reinforced Polyester (GRP) for Automobile Components Design in Crash Prevention Scheme, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.1, 2012
• Chukwutoo Christopher Ihueze, Alfred Nwabunwanne. Enetanya
• Citations: 7 (Details)

• Study on Weld Quality Characteristics of Pulsed Current Micro Plasma Arc Welding of Inconel625 Sheets, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.2, 2012
• K. Siva Prasad, Ch.Srinivasa Rao, D.Nageswara Rao
• Citations: 7 (Details)

• Comparative Study of Corrosion Sensitivity of Selected Ferrous Metals in Crude Oil, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.6, 2012
• O. Ogundare, I.M. Momoh, O.J. Akinribide, A.R. Adetunji, J.O. Borode, S.O.O. Olusunle, O.O. Adewoye
• Citations: 7 (Details)

• Incorporation of Acetoacetanilide Crystals in Host PMMA Polymer Matrix and Characterizations of the Hybrid Composite, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.5, 2012
• Sharada G. Prabhu, B.Manjunatha Pattabi
• Citations: 7 (Details)

• Crystal Growth of Some Renal Stones Constituents: I. In vitro Crystallization of Trace Element and Its Characterization Studies, Journal of Minerals and Materials Characterization and Engineering, Vol.6 No.1, 2007
• P. Sundaramoorthi, S. Kalainathan
• Citations: 7 (Details)

• Enrichment of Molybdenum and Fluorite by Flotation of Fluorite Ore Containing Molybdenum, Journal of Minerals and Materials Characterization and Engineering, Vol.5 No.2, 2006
• Abuzer Akgün, İbrahim Teğin, Recep Ziyadanoğulları
• Citations: 7 (Details)

• Growth and Characterization Studies of SrCaMHP Single Crystal in Silica Gel Medium and Laser Induced Nucleation Reduction Strategy, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.1, 2009
• G. Kanchana, P. Sundaramoorthi, G.P. Jeyanthi
• Citations: 7 (Details)

• Characterization Studies on Ilmenite of Ullal and Suratkal along Karnataka Coastline, West Coast of India, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.6, 2009
• M. Sundararajan, K.H. Bhat, N. Babu, M.E.K. Janaki, P.N. Mohan Das
• Citations: 7 (Details)

• Growth and Characterization Studies of MnHP Single Crystal in Silica Gel Medium, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.5, 2009
• P. Suresh, G. Kanchana, P. Sundaramoorthi
• Citations: 7 (Details)

• Effect of Applied Load on Dry Sliding Wear Property of Aged TiNiCu Alloy, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.9, 2010
• Narendranath. S, S. Basavarajappa, K.V. Arun, S. Manjunath Yadav
• Citations: 7 (Details)

• Effects of Reinforcement Combinations of Calcium Carbonate Nanofiller on the Mechanical and Creep Properties of Polypropylene, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.10, 2010
• Chris Chukwutoo Ihueze, Chinedum Ogonna Mgbemena
• Citations: 7 (Details)

• Crystal Growth, Thermal, Mechanical and Optical Properties of a New Organic Nonlinear Optical Material: Ethyl P-Dimethylamino Benzoate (EDMAB), Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.1, 2011
• V. Natarajan, J. Kalyana Sundar, P. Selvarajan, M. Arivanandhan, K. Sankaranarayanand, S. Natarajan, Y. Hayakawa
• Citations: 7 (Details)

• Nitriding of Medium Carbon Ferromanganese Alloy in Gas Solid Reaction, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.4, 2011
• Saeed N. Ghali
• Citations: 7 (Details)

• Hot Rolling and Ageing Effect on the Pseudoelasticity Behaviour of Ti-Rich TiNi Shape Memory Alloy, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.4, 2010
• Narendranath. S., Vijay Desai, S. Basavarajappa, K.V. Arun, S. Manjunath Yadav
• Citations: 7 (Details)

• Technologic Tests of Turkey-Gordes Zeolite Minerals, Journal of Minerals and Materials Characterization and Engineering, Vol.5 No.5, 2017
• Oyku Bilgin
• Citations: 7 (Details)

• The Influence of Heat Treatment on the Caustic Etching Behaviour of the Automotive AA6111 Alloy, Journal of Minerals and Materials Characterization and Engineering, Vol.4 No.6, 2016
• Abdelhadi Abouarkoub, George Thompson, Xiaorong Zhou, Geoffrey Scamans
• Citations: 7 (Details)

• Development of a Combined Flotation and High Pressure Leaching Process for Copper and Nickel Recovery from Mine Tailing, Journal of Minerals and Materials Characterization and Engineering, Vol.5 No.3, 2017
• Refilwe Sandra Magwaneng, Altansukh Batnasan, Kazutoshi Haga, Atsushi Shibayama
• Citations: 7 (Details)

• Chemical Treatment Effects of Blue, Yellow and Green Colors with Heating Methods on Agates of Cheshme Shoor Area, Qom, Iran, Journal of Minerals and Materials Characterization and Engineering, Vol.4 No.3, 2016
• Mohammad Yazdi, Reyhane Lotfi, Fariborz Masoudi, Niloofar Musavi Pak
• Citations: 7 (Details)

• The Art of Talc Flotation for Different Industrial Applications, Journal of Minerals and Materials Characterization and Engineering, Vol.4 No.3, 2016
• Tawfik Refaat Boulos, Suzan Sami Ibrahim, Ahmed Yehia
• Citations: 7 (Details)

• Separation of Kaolinite from Ion-Adsorption Rare Earth Tailings in Southern China and Iron Removal Treatment, Journal of Minerals and Materials Characterization and Engineering, Vol.4 No.1, 2016
• Yongqing Wang, Huayin Liang, Qibing Chang, Xiaozhen Zhang, Jian’er Zhou
• Citations: 7 (Details)

• Characterization and Iron Removal Treatment of Ion-Adsorption Rare Earth Tailings in Southern China, Journal of Minerals and Materials Characterization and Engineering, Vol.4 No.2, 2016
• Yongqing Wang, Xin Nie, Qibing Chang, Huayin Liang, Xiaozhen Zhang, Jian-Er Zhou
• Citations: 7 (Details)

• Differential Flotation of Some Egyptian Feldspars for Separation of Both Silica and Iron Oxides Contaminants, Journal of Minerals and Materials Characterization and Engineering, Vol.3 No.6, 2015
• Tawfik Refaat Boulos, Suzan Sami Ibrahim, Ahmed Yehia
• Citations: 7 (Details)

• Activation of Jordanian Ore Bentonite by Sodium Carbonates, Journal of Minerals and Materials Characterization and Engineering, Vol.3 No.6, 2015
• Shakhatreh K. Saleh, Mehaysen A. Mahasneh
• Citations: 7 (Details)

• Liberation Size and Beneficiation of Enyigba Lead Ore, Ebonyi State, South-East Nigeria, Journal of Minerals and Materials Characterization and Engineering, Vol.3 No.3, 2015
• Ettu Obassi, David Terfa Gundu, Usman Muhammad Akindele
• Citations: 7 (Details)

• Reduction of Undercuts in Fillet Welded Joints Using Taguchi Optimization Method, Journal of Minerals and Materials Characterization and Engineering, Vol.3 No.3, 2015
• Joseph Achebo, Sule Salisu
• Citations: 7 (Details)

• Hybrid Composite Based on Natural Rubber Reinforced with Short Fibers of the Triumfetta cordifolia/Saccharum officinarum L.: Performance Evaluation, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.5, 2022
• Abel Emmanuel Njom, Armel Mewoli, Marie Josette Ndengue, Fabien Betene Ebanda, Augustine Demze Nitidem, Sandrine Biloa Otiti, Yannick Devario Youssi Bang, Legrand Ndoumou Belinga, Pierre Marcel Anicet Noah, Atangana Ateba
• Citations: 7 (Details)

• The Effects of Water Recycling on Flotation at a North American Concentrator—Part 1, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.4, 2020
• Antonio Di Feo, Saviz Mortazavi, Sean Langley, Lucie Morin, Gauri Prabhakar, André Demers, Ian Bedard, Konstantin Volchek
• Citations: 7 (Details)

• Effect of Desliming on Flotation Response of Kansanshi Mixed Copper Ore, Journal of Minerals and Materials Characterization and Engineering, Vol.7 No.4, 2019
• Tina Phiri, Cornwell Tepa, Ricky Nyati
• Citations: 7 (Details)

• End-Use Properties of Pineapple Leaf Fibre Filled Natural Rubber, Journal of Minerals and Materials Characterization and Engineering, Vol.7 No.6, 2019
• Chinenye C. Ekwueme, Isaac O. Igwe, Anokwute O. Vivian
• Citations: 6 (Details)

• Extraction of Pectin from Ripe Plantain Peel, Fabrication and Characterization of Composite (Pectin/PVA/Glycerol) Films Produced from the Extracted Pectin, Journal of Minerals and Materials Characterization and Engineering, Vol.7 No.6, 2019
• Chizoba May Obele, Stanley Udochukwu Ofoegbu, Chioma Irene Awuzie
• Citations: 6 (Details)

• Mechanochemical Synthesis and Characterization of Molybdenum Dioxide-Hematite Nanostructures with Different Molarities, Journal of Minerals and Materials Characterization and Engineering, Vol.6 No.6, 2018
• Matthew Knauss, Felicia Tolea, Mihaela Valeanu, Lucian Diamandescu, Richard Trotta, Kelly Wood, Agnieszka Grabias, Monica Sorescu
• Citations: 6 (Details)

• Characterization of Clay Materials from Ivory Coast for Their Use as Adsorbents for Wastewater Treatment, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.4, 2022
• Lucas Moses Kouadio, Seif El Islam Lebouachera, Sylvie Blanc, Joseph Sei, Christelle Miqueu, Florence Pannier, Hervé Martinez
• Citations: 6 (Details)

• Applications of Compliance to Cost Ratio (C-CR) Analysis in the Determination of Optimum Mix of Insulating Bricks in Masonry, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.2, 2021
• Davies Oladayo Folorunso, Abayomi Adewale Akinwande
• Citations: 6 (Details)

• Melting Time Prediction Model for Induction Furnace Melting Using Specific Thermal Consumption from Material Charge Approach, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.1, 2021
• Onigbajumo Adetunji, Seidu Saliu Ojo, Akinlabi Oyetunji, Newton Itua
• Citations: 6 (Details)

• Synthesis, Growth and Characterization of Nonlinear Optical Single Crystal of Serine Succinate, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.1, 2021
• S. Akilandeswari, L. Jothi
• Citations: 6 (Details)

• Microstructure, Dislocation Density and Thermal Expansion Behavior Using Thermo Elastic Models of Zircon Sand Reinforced as Cast ZA-27 Composites, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.1, 2021
• G. R. Gurunagendra, V. Bharat, B. R. Raju, D. G. Amith, Vijayakumar Pujar, C. Ravi Keerthi
• Citations: 6 (Details)

• Elaboration and Characterization of Composite Materials Reinforced by Papaya Trunk Fibers (Carica papaya) and Particles of the Hulls of the Kernels of the Winged Fruits (Canarium schweinfurthii) with Polyester Matrix, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.5, 2020
• Ze Eric Parfait, Noah Pierre Marcel, Nnomo Elobi Didine, Nfor Clins Wiryikfu, Betene Ebanda Fabien, Ngahiyi Abbé Claude Valery, Atangana Ateba
• Citations: 6 (Details)

• Controlled-Release Analysis of Potassium Permanganate Using PMMA Matrix, Journal of Minerals and Materials Characterization and Engineering, Vol.2 No.6, 2014
• Jude O. Ighere, Ramesh C. Chawla
• Citations: 6 (Details)

• Investigation of Aloe lateritia Gel as Corrosion Inhibitor for Mild Steel in 2 M HNO₃ and 1 M H₂SO₄ Media, Journal of Minerals and Materials Characterization and Engineering, Vol.4 No.1, 2016
• Lucas Paul, Revocatus L. Machunda
• Citations: 6 (Details)

• Microstructural Evolution of Cast Hyper-Eutectic Al-18% Si Alloy during Cyclic Semi-Solid Heat Treatment, Journal of Minerals and Materials Characterization and Engineering, Vol.3 No.5, 2015
• Mohamed Ramadan
• Citations: 6 (Details)

• Microstructure and Corrosion Properties of the Plasma-MIG Welded AA5754 Automotive Alloy, Journal of Minerals and Materials Characterization and Engineering, Vol.3 No.4, 2015
• A. Abouarkoub, G. E. Thompson, X. Zhou, G. Scamans
• Citations: 6 (Details)

• Experimental Investigations on Electroless Deposition of Copper on Basalt Fibers, Journal of Minerals and Materials Characterization and Engineering, Vol.3 No.4, 2015
• S. Ezhil Vannan
• Citations: 6 (Details)

• Leachability of Oil Shale Ash from Isfir Al-Mahata Oil Shale, Southern Jordan, Journal of Minerals and Materials Characterization and Engineering, Vol.4 No.5, 2016
• Hani M. Alnawafleh, Mohammad S. Al-Harahsheh, Adnan M. Al-Harahsheh
• Citations: 6 (Details)

• Phase, Microstructure and Beneficiation of Manganese Ore by Acid Leaching, Journal of Minerals and Materials Characterization and Engineering, Vol.6 No.1, 2018
• Sajad Ali, Yaseen Iqbal, Kamran Ahmad, Billal Afridi
• Citations: 6 (Details)

• Effect of Atmospheric Plasma Paint Removal on the Fatigue Performance of 2024-T3 Aluminium Alloy Sheet, Journal of Minerals and Materials Characterization and Engineering, Vol.6 No.1, 2018
• Marko Yanishevsky, Ali Merati, Yan Bombardier
• Citations: 6 (Details)

• Characterization and Evaluation of the Potential Uses of Mouyondzi Clay, Journal of Minerals and Materials Characterization and Engineering, Vol.6 No.1, 2018
• Joseph Marie Moutou, Paul Mozalin Foutou, Laurent Matini, Vivien Banzouzi Samba, Zita Flora Diamouangana Mpissi, Raunel Loubaki
• Citations: 6 (Details)

• State of Knowledge on Starch as an Alternative Solution to Petrochemical Resources—A Review, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.2, 2023
• Jonas Peequeur Essome Mbang, Pierre Marcel Anicet Noah, Laurent Libog, Téclaire Ngoup, Michel Mbere Taoga, Fabien Betene Ebanda
• Citations: 6 (Details)

• Effect of Chromium on the Mechanical Properties of Powder-Processed Fe-0.35 wt% P Alloys, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.8, 2009
• Shefali Trivedi, Yashwant Mehta, K. Chandra, P.S. Mishra, P.S. Mishra
• Citations: 6 (Details)

• Model for Predicting the Initial Solution pH at Pre-Assumed Final pH and Concentration of Dissolved Zinc during Leaching of Galena in Butanoic Acid Solution, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.8, 2009
• C. I. Nwoye
• Citations: 6 (Details)

• Sand Slurry Erosive Wear Behavior of Hot Extruded Al6061-SiC Composites, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.6, 2011
• C.S. Ramesh, R. Keshavamurthy
• Citations: 6 (Details)

• Exploring the Potentials of Tailings of Bukuru Cassiterite Deposit for the Production of Iron Ore Pellets, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.5, 2009
• O. K. Abubakre, Y. O. Sule, R. A. Muriana
• Citations: 6 (Details)

• Model for the Calculation of the Concentration of Dissolved Hematite during Hydrogen Peroxide Leaching of Iron Oxide Ore, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.5, 2009
• C. I. Nwoye, C. C. Nwakwuo, C. Nlebedim, U.C. Nwoye, R. A. Umana, G. C. Obasi
• Citations: 6 (Details)

• Effects of Variation of Some Process Variables on Recrystallization Rate of Aluminium Alloy (6063), Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.1, 2009
• O.E. Olorunniwo, P.O. Atanda, K.J. Akinluwade
• Citations: 6 (Details)

• Novel Technology for Chlorination of Niobium and Tantalum Oxides and Their Low-Grade Ore Concentrates, Journal of Minerals and Materials Characterization and Engineering, Vol.7 No.2, 2008
• B. A. Shainyan, Yu. S. Danilevich, Yu. L. Garmazov, A. L. Finkelstein, T. S. Aisueva, V. K. Turchaninov
• Citations: 6 (Details)

• Study on the Reliability of Coke Research Establishment Micum 40 Formula to Predict Coke Micum 40 Strength at The Ajaokuta Steel Plant, Nigeria, Journal of Minerals and Materials Characterization and Engineering, Vol.6 No.2, 2007
• A.O. Adeleke, A.O. Olulana, A.B. Adahama, R.S Makan, S.A. Ibitoye
• Citations: 6 (Details)

• Nucleation Reduction Strategy of (Brushite) CHP Crystals in SMS Media and Its Characterization Studies, Journal of Minerals and Materials Characterization and Engineering, Vol.7 No.1, 2008
• G. Kanchana, P. Sundaramoorthi, R. Santhi, S. Kalainathan, G.P. Jeyanthi
• Citations: 6 (Details)

• Separation of Metals from a Slag Using a Multi-cell Jig, Journal of Minerals and Materials Characterization and Engineering, Vol.2 No.2, 2003
• David C. Yang, Ricus van Reenan, Vimal Bhimsan
• Citations: 6 (Details)

• Vinyl Acetate-Acrylic Acid Copolymer for Enhanced Oil Recovery, Journal of Minerals and Materials Characterization and Engineering, Vol.1 No.2, 2002
• Gerard T. Caneba, Jay Axland
• Citations: 6 (Details)

• Production and Characterization of Nano Structured Silicon Carbide by High Energy Ball Milling, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.5, 2012
• J. Babu Rao, Dil Kush, NRMR Bhargava
• Citations: 6 (Details)

• Dielectric and Thermal Studies of Copper Doped Magnesium Hydrogen Maleate Hexahydrate Single Crystals, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.15, 2011
• B. Rajagopal, A.V. Sarma, M.V. Ramana
• Citations: 6 (Details)

• Analytical Study of Two Differently Ranked Coals Using UV-VIS-NIR Spectroscopy, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.10, 2011
• B. Manoj, A.G. Kunjomana
• Citations: 6 (Details)

• Effect of Al₂O₃ Content and Process Variables on Structure and Properties of Al-Al₂O₃ Compacts, Journal of Minerals and Materials Characterization and Engineering, Vol.2 No.2, 2014
• Arindam Ghosh, Subrata Chatterjee
• Citations: 6 (Details)

• Effect of Surface Modification on Candidate Alloys for Canadian SCWR Fuel Cladding, Journal of Minerals and Materials Characterization and Engineering, Vol.2 No.2, 2014
• Jian Li, Pei Liu, Renata Zavadil, Tom Malis, Sami Penttilä
• Citations: 6 (Details)

• Design and Development of Grip for Circular Test Piece Inuniversal Tensile Testing Machine, Journal of Minerals and Materials Characterization and Engineering, Vol.1 No.6, 2013
• Ojo Jeremiah Akinribide, Adetunji Kolawole Ogunkoya, Itopa Monday Momoh, Olasupo Daniel Ogundare, Ba’aku Emmanuel AttahDaniel, Samuel Olugbenga Oloruntoba Olusunle
• Citations: 6 (Details)

• The Effect of MgO Dopant and Laser Treatment on ZnO Ceramic, Journal of Minerals and Materials Characterization and Engineering, Vol.1 No.6, 2013
• Fadhil A. Chyad, Shaymaa Q. Abul Hassan, Zyad T. Al-Dahan
• Citations: 6 (Details)

• Predictability of Al-Mn Alloy Exposure Time Based on Its As-Cast Weight and Corrosion Rate in Sea Water Environment, Journal of Minerals and Materials Characterization and Engineering, Vol.1 No.6, 2013
• Chukwuka Nwoye, Simeon Neife, Ebere Ameh, Awo Nwobasi, Ndubuisi Idenyi
• Citations: 6 (Details)

• Electrochemical Impedance Spectroscopy of Hybrid Epoxy Resin Emulsion Coatings, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.10, 2012
• Rakesh N. Patil, Brihbihari V. Sharma, Prakash A. Mahanwar
• Citations: 6 (Details)

• Study on Effect of Welding Speed on Micro Structure and Mechanical Properties of Pulsed Current Micro Plasma Arc Welded Inconel 625 Sheets, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.10, 2012
• Chalamalasetti Srinivasa Rao, Kondapalli Siva Prasad, Damera Nageswara Rao
• Citations: 6 (Details)

• Kinetics Growth and Oxidation Resistance of Aluminide Coatings Deposited by the CVD Method on Re 80 Superalloy, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.8, 2012
• Marek Goral, Maciej Pytel, Kamil Dychton, Andrzej Nowotnik
• Citations: 6 (Details)

• Numerical Optimization of Sand Casting Parameters Using the Dantzig’s Simplex Method, Journal of Minerals and Materials Characterization and Engineering, Vol.1 No.5, 2013
• John Ogheneortega Oji, Simon Godenaan Datau, Kunle Joseph Akinluwade, Adeyinka Taofeek Taiwo, Dayo Adeyemi Isadare, Sunday Hendrix Pamtoks, Adelana Rasaki Adetunji
• Citations: 5 (Details)

• Evaluation of the Influence of Fossil Fuel on Corrosion Resistance of Brass, Journal of Minerals and Materials Characterization and Engineering, Vol.2 No.3, 2014
• Olayide Rasaq Adetunji, Peter Olaitan Aiyedun, Sidikat Ibiyemi Kuye, Dauda Adewale Lateef
• Citations: 5 (Details)

• Effect of Orientation and Applied Load on Abrasive Wear Property of Brass 60:40, Journal of Minerals and Materials Characterization and Engineering, Vol.2 No.1, 2014
• Mohd Shadab Khan, Zahir Hasan, Syed Mohd Farhan
• Citations: 5 (Details)

• Unification of the Quadratic Model Equations of the Inhibition Characteristics of Acidified Ocimum Basilicum on the Corrosion Behaviour of Mild Steel, Journal of Minerals and Materials Characterization and Engineering, Vol.1 No.6, 2013
• Michael O. Nwankwo, Paul A. Nwobasi, Peter O. Offor, Ndubuisi E. Idenyi
• Citations: 5 (Details)

• Characterization by Thermogravimetric Analysis of Polymeric Concrete with High Density Polyethylene Mechanically Recycled, Journal of Minerals and Materials Characterization and Engineering, Vol.2 No.4, 2014
• Alma Delia Rodríguez Martínez, Martha Lilia Domínguez Patiño, Rosa Maria Melgoza Alemán, Gerardo Antonio Rosas Trejo
• Citations: 5 (Details)

• Models for Assessment and Computational Analysis of Hardness of the Heat Affected Zone in Water Cooled Aluminum Weldment, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.8, 2011
• C. I. Nwoye, C. N. Anyakwo, E. Obidiegwu, N. E. Nwankwo
• Citations: 5 (Details)

• Characterization and Corrosion Behavior of Plasma Sprayed Pure and Reinforced HA Coatings in Simulated Body Fluid, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.9, 2011
• Gurbhinder Singh, Surendra Singh, Satya Prakash
• Citations: 5 (Details)

• Research of Crystallization of Aluminums Cast Iron, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.13, 2011
• Saule Kaldybayeva
• Citations: 5 (Details)

• Corrosion-Wear of ST60-Mn Steel in Cassava Juice, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.2, 2012
• M. A. Bodude, W.A. Ayoola, D. E. Esezobor, A. A. Agbeleye
• Citations: 5 (Details)

• Drilling of TiO₂ and Zns Filled Gfrp Composites, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.8, 2012
• K. V. Arun, D. Sujay Kumar, M. C. Murugesh
• Citations: 5 (Details)

• Model for Prediction of the Concentration of Extracted Tin during Leaching of Cassiterite in Potassium Hydroxide Solution, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.7, 2012
• Onyedika Gerald, Ugwu Priscilla, Ogwuegbu Martin, Ejike Emmanuel, Nwoye Chukwuka, Jiann-Yang Hwang
• Citations: 5 (Details)

• Adsorption of Surfactant Dispersed Nanometer Magnetite, Journal of Minerals and Materials Characterization and Engineering, Vol.1 No.2, 2002
• J. Y. HWANG
• Citations: 5 (Details)

• Mineralogical Transformations in Altasteel Electric Arc Furnace Dust Roasted with Na₂CO₃ and Secondary Ferrite-Forming Additives, Journal of Minerals and Materials Characterization and Engineering, Vol.7 No.1, 2008
• P. C. Holloway, T. H. Etsell
• Citations: 5 (Details)

• A Study of Processing Parameters on the Carburization of C2R Steels, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.2, 2009
• P.O. Atanda, O.E. Olorunniwo, L.E. Umoru, A.D. Adeyeye
• Citations: 5 (Details)

• Effect of Chromium on the Corrosion Behavior of Powder-Processed Fe-0.35 wt % P Alloys, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.7, 2009
• Yashwant Mehta, Shefali Trivedi, K. Chandra, P.S. Mishra
• Citations: 5 (Details)

• Model for Assessment and Computational Analysis of the Concentration of Zinc Dissolved during Leaching of Sphalerite in Butanoic Acid Solution, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.5, 2010
• C. I. Nwoye, I. E. Mbuka
• Citations: 5 (Details)

• Finite Elements in the Solution of Continuum Field Problems, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.5, 2010
• Chukwutoo Christopher Ihueze
• Citations: 5 (Details)

• Effects of Machine Parameter and Natural Factors on the Productivity of Loading and Haulage Equipment, Journal of Minerals and Materials Characterization and Engineering, Vol.6 No.1, 2018
• Martin Itoolwa Kulula, Jide Muili Akande
• Citations: 5 (Details)

• Some Features of the Influence of Titanium and Nitrogen Addition to NiCrMoV Steel, Journal of Minerals and Materials Characterization and Engineering, Vol.6 No.2, 2018
• Saeed Ghali, Mamdouh Eissa, Michael Mishreky
• Citations: 5 (Details)

• Texture/Microstructural Evolution and Mechanical Properties of a Hot and Cold Rolled Al-Mg-Si-Cu Alloy, Journal of Minerals and Materials Characterization and Engineering, Vol.5 No.4, 2017
• Yihan Wang, Lixin Zhang, Xiaohui Yang, Kai Li, Song Ni, Yong Du, Min Song
• Citations: 5 (Details)

• Fabrication and Characterization of Porous Silica Monolith by Sintering Silica Nanoparticles, Journal of Minerals and Materials Characterization and Engineering, Vol.5 No.3, 2017
• Hiroshi Ikeda, Shigeru Fujino
• Citations: 5 (Details)

• Electroslag Remelting of High Technological Steels, Journal of Minerals and Materials Characterization and Engineering, Vol.3 No.6, 2015
• Hossam Halfa, A. M. Reda
• Citations: 5 (Details)

• Characterization and Valuation of a Clay Soil Sampled in Londéla-Kayes in the Republic of Congo, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.2, 2021
• Roger Makosso Voula, Flora Zita Mpissi Diamouangana, Joseph-Marie Moutou, Vivien Igore Banzouzi Samba, Mozalin Paul Foutou, Julien Placide Ngoma
• Citations: 5 (Details)

• Optimization of Wear Factors of Aluminium Hybrid Metal Matrix Composites Using Taguchi Method, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.1, 2021
• P. B. Asha, Sneha Sarika Murthy, C. R. Prakash Rao, V. Ravi Kumar, R. Kiran, C. N. Suresha
• Citations: 5 (Details)

• Synthesis of Bi₂Fe₄O₉ Crystalline Ceramic as Extremely Capable Photocatalyst via Proficient Chemical Route, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.5, 2021
• Manish Kumar Verma, Vinod Kumar, Tapas Das, Ravi Kumar Sonwani, Vishnu Shankar Rai, Dinesh Prajapati, Kedar Sahoo, Vishal Kumar Kushwaha, Asha Gupta, Kamdeo Mandal
• Citations: 5 (Details)

• Comparative Study of the Reactivity of Clay Earth Materials for the Production of Compressed Earth Blocks in Ambient Conditions: Effect on Their Physico-Mechanical Performances, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.1, 2022
• Tarmangue Dime, Seick Omar Sore, Philbert Nshimiyimana, Adamah Messan, Luc Courard
• Citations: 5 (Details)

• Effects of Electrode Types on the Microstructure, Tensile and Hardness Properties of 304 L Austenitic Stainless Steel Heat-Affected Zone (HAZ), Journal of Minerals and Materials Characterization and Engineering, Vol.6 No.5, 2018
• Bolarinwa Johnson Kutelu, Emmanuel Gbolade Adubi, Saliu Ojo Seidu
• Citations: 5 (Details)

• Utilization of Cement Kiln Dust (CKD) with Silica Fume (SF) as a Partial Replacement of Cement in Concrete Production, Journal of Minerals and Materials Characterization and Engineering, Vol.7 No.4, 2019
• Arafa Elsayed Elhelloty, Mohammed Taha Nooman, Rafik Khairy Abdelwahab, Ahmed Islam Abdullah
• Citations: 5 (Details)

• Process Mineralogy of Iranian High Sulfur Iron Ore, Journal of Minerals and Materials Characterization and Engineering, Vol.6 No.4, 2018
• Tonglin Zhao, Xiaoli Wang, Hongle Ai, Ahmed Sobhy
• Citations: 5 (Details)

• Mechanical, Microstructural and Mineralogical Analyses of Porous Clay Pots Elaborated with Rice Husks, Journal of Minerals and Materials Characterization and Engineering, Vol.6 No.3, 2018
• Yeri Dah-Traoré, Lamine Zerbo, Mohamed Seynou, Raguilnaba Ouedraogo
• Citations: 5 (Details)

• Instrumental Characterization of Pretoria Clay Soil by XRF, XRD and SEM, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.1, 2020
• Adeyinka Olaseinde, Mxolisi Brendon Shongwe, Joseph Babalola, Adeshina Luqman Adisa
• Citations: 5 (Details)

• The Potentials of Kyanite Particles and Coconut Shell Ash as Strengthener in Aluminum Alloy Composite for Automobile Brake Disc, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.3, 2020
• Simon Godenaan Datau, Mohammed Ahmed Bawa, Jacob Shekwonudu Jatau, Muhammad Hamisu Muhammad, Adekunle Sefiu Bello
• Citations: 5 (Details)

• Simulation and Techno-Economic Performance of a Novel Charge Calculation and Melt Optimization Planning Model for Steel Making, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.4, 2020
• Onigbajumo Adetunji, Saliu Ojo Seidu
• Citations: 5 (Details)

• Hydraulic Testing of Compacted Bentonite Used for Plug and Abandonment Operations, Journal of Minerals and Materials Characterization and Engineering, Vol.7 No.5, 2019
• Heinz-Gerd Holl
• Citations: 5 (Details)

• The Impact of Marine Water on Different Types of Coarse Aggregate of Geopolymer Concrete, Journal of Minerals and Materials Characterization and Engineering, Vol.7 No.5, 2019
• Shimaa Younis Megahed, Abolwafa Mohamad Elthakeb, Walid Alsayed Mohamed, Mohammed Taha Nooman, Walid Hessian Soufy
• Citations: 5 (Details)

• Influence of Nanocrystalline Structure on Wear and Corrosion Behavior of Al-SiC_P Composite, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.2, 2020
• Jagannati Venumurali, Gaddam Bhanodaya Reddy
• Citations: 4 (Details)

• The Physico-Chemical Characterization of Mesoporous Sulfated Zirconia Nanoparticles Prepared under Structure-Directing-Free for n-Hexane Isomerization, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.3, 2020
• Gongyi Guo, Yuli Chen, Shi Xu
• Citations: 4 (Details)

• Fabrication of Micro Structures by Ultrashort Voltage Pulse Electrical Discharge Machining, Journal of Minerals and Materials Characterization and Engineering, Vol.6 No.2, 2018
• Chenxue Wang, Weiyu He, Yan Xiao
• Citations: 4 (Details)

• Mineralogical and Physical Characterization of Clay of Sitakunda Anticline: Used for Ceramic Industries, Journal of Minerals and Materials Characterization and Engineering, Vol.6 No.3, 2018
• Mst. Shanjida Sultana, Mohammad Nazim Zaman, Md. Aminur Rahman, Pradip Kumar Biswas, Pranab Kumar Nandy
• Citations: 4 (Details)

• Effects of Collectors and Frothers on Copper and Molybdenum Coarse Particle Recoveries—A Statistical Approach, Journal of Minerals and Materials Characterization and Engineering, Vol.7 No.3, 2019
• Tony Di Feo, Rolando Lastra
• Citations: 4 (Details)

• Effect of Heat Treatment on Tensile and Corrosion Properties of LM6 Hybrid Metal Matrix Composite Reinforced with Cenosphere and Red Mud, Journal of Minerals and Materials Characterization and Engineering, Vol.7 No.1, 2019
• Ravi Kumar V., Suresh R., Prakash Rao C. R., Ravi Kumar D. V., Bharat V.
• Citations: 4 (Details)

• The Effect of Unloading Positions and Times on Sheet Metal’s Stress-Strain Curve, Journal of Minerals and Materials Characterization and Engineering, Vol.6 No.3, 2018
• Kunmin Zhao, Wumei Fang, Baotang Wang, Daxin Ren
• Citations: 4 (Details)

• Characterization of the Clay Collected in the Locality of Dolisie in Congo-Brazzaville, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.2, 2022
• Rarahu Nursie Mboho Oba, Grace Mazel Ifo, Erman Eloge Nzaba Madila, Flora Zita Mpissi Diamouangana, Thierry Vila, Mozalin Paul Foutou, Joseph-Marie Moutou
• Citations: 4 (Details)

• Unit Cell Modelling of Auxetic Structure, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.4, 2022
• Sydney Pothier, Reem Roufail, Margaret Malton
• Citations: 4 (Details)

• Analysis of Chemical Compositions of Portland Cement and Limestone from Four Geopolitical Zones of Nigeria, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.2, 2022
• Abdulhanan Onimisi Ahmed, Anayo Christian Etonihu, Nwaze Obini Nweze
• Citations: 4 (Details)

• Evaluation of Mineral Elements Content of Senegal Fruits, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.2, 2022
• Rokhaya Sylla Gueye, Jérôme Ledauphin, Fabienne Baraud, Lydia Leleyter, Mélanie Lemoine, Rokhaya Gueye, Adama Diedhiou, Mamadou Balde, Nango Gaye, Matar Seck, Djibril Fall, Alassane Wele
• Citations: 4 (Details)

• Production of High-Purity Silica Sand from Ivorian Sedimentary Basin by Attrition without Acid Leaching Process for Windows Glass Making, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.4, 2021
• Péyokoh Roger Thio, Kouassi Bruno Koffi, Kouadio Denis Konan, Kouakou Alphonse Yao
• Citations: 4 (Details)

• Electromagnetic Expansion and Fragmentation of Hollow Aluminium 5052 Tube, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.6, 2020
• Hitesh Choudhary, Chiradeep Gupta, Nirupama Tiwari, Tanmay Kolge, Rajeev Kapoor, Archana Sharma
• Citations: 4 (Details)

• Effect of Organic Waste on Crystal Structure and Mechanical Properties of Concrete, Journal of Minerals and Materials Characterization and Engineering, Vol.3 No.5, 2015
• Samuel Oloruntoba Olugbenga Olusunle, Theresa Chikwuo Ezenwafor, Bidemi Sikirat Jiddah-Kazeem, Akeem Kareem, Ojo Jeremiah Akinribide, Adekunle Taofeek Oyelami
• Citations: 4 (Details)

• Optimization of Recuperative System in Rotary Furnace for Minimization of Elemental Loss during Melting, Journal of Minerals and Materials Characterization and Engineering, Vol.2 No.6, 2014
• Sylvester Olanrewaju Omole, Raymond Taiwo Oluyori
• Citations: 4 (Details)

• Evaluation of Effects of Synthetic Compound and Mineral Admixture on Crystal Structure of Concrete, Journal of Minerals and Materials Characterization and Engineering, Vol.3 No.3, 2015
• Samuel Oloruntoba Olugbenga Olusunle, Theresa Chikwuo Ezenwafor, Bidemi Sikirat Jiddah-Kazeem, Akeem Kareem, Ojo Jeremiah Akinribide, Adekunle Taofeek Oyelami
• Citations: 4 (Details)

• Age Strengthening of Grey Cast Iron Alloys for Machine Cutting Tools Production, Journal of Minerals and Materials Characterization and Engineering, Vol.3 No.3, 2015
• A. I. Opaluwa, A. Oyetunji, S. O. Seidu
• Citations: 4 (Details)

• Effect of Laser Cladding Al Ni TiC Powder on Microstructure and Properties of Aluminum Alloy, Journal of Minerals and Materials Characterization and Engineering, Vol.5 No.1, 2017
• Xiaolin Zhang, Kemin Zhang, Jinxin Ma, Yu Wang
• Citations: 4 (Details)

• Heavy Metal Contents of Different Wastes Used for Compost, Journal of Minerals and Materials Characterization and Engineering, Vol.4 No.3, 2016
• Tazeen Fatima Khan, Mohammed Waji Ullah, Shah Muhammad Imamul Huq
• Citations: 4 (Details)

• Preparation and Structural Characterization of Vanadium Doped Ni – B Binary Hard Alloys, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.6, 2010
• J. A. Ajao
• Citations: 4 (Details)

• Synthesis and Characterization of Ultrafine Grained 304 Stainless Steel through Machining, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.5, 2011
• V. Senthilkumar, K. Lenin
• Citations: 4 (Details)

• The Influence of Creep on the Mechanical Properties of Calcium Carbonate Nanofiller Reinforced Polypropylene, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.2, 2011
• Chrisopher Chukwutoo Ihueze, Chinedum Ogonna Mgbemena, Ugwu Sylveste
• Citations: 4 (Details)

• Acidulation and Regeneration of Bamboo Derived Sorbents for Gas Phase Adsorption of Elemental Mercury, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.2, 2011
• Naved Siddiqui, Jarlen Don
• Citations: 4 (Details)

• Stress Loops Effect in Ductile Failure of Mild Steel, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.4, 2009
• O.O. Oluwole
• Citations: 4 (Details)

• Characterization of the Weld Regions within Duplex Stainless Steels using Magnetic Force Microscopy, Journal of Minerals and Materials Characterization and Engineering, Vol.7 No.2, 2008
• B. Gideon, L. Ward, K. Short
• Citations: 4 (Details)

• Towards the Development of CO₂ Separation Membranes, Journal of Minerals and Materials Characterization and Engineering, Vol.7 No.2, 2008
• Gerard Caneba, Michael Renier, Brian Ott
• Citations: 4 (Details)

• Development of Mathematical Equation for Fraction of Solid in AlSi7Mg Alloy Solidification Simulation, Journal of Minerals and Materials Characterization and Engineering, Vol.7 No.1, 2008
• O.O. Oluwole, G.O. Oluwadare, A.A. Afonja
• Citations: 4 (Details)

• Adsorption of Hg⁰ on the Unburned Carbon with HF Acid Leaching, Journal of Minerals and Materials Characterization and Engineering, Vol.3 No.1, 2004
• Jinjing Luo, J.Y. Hwang, B. C. Greenlund, Zhiyong Xu
• Citations: 4 (Details)

• Evaluation of the Influence of Bainitic Transformation on some Mechanical Properties of Calcium Treated Cast iron, Journal of Minerals and Materials Characterization and Engineering, Vol.6 No.2, 2007
• L.E. aUmoru, J.A. Ali, A.A. Afonja
• Citations: 4 (Details)

• Structural and microstructural characteristics of B-doped PbTe semiconductor, Journal of Minerals and Materials Characterization and Engineering, Vol.5 No.2, 2006
• Jovica N. Stojanovic
• Citations: 4 (Details)

• Mechanical Properties of Powder Based Steel used as Backing Plate in Heavy Duty Brake Pad Manufacturing, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.5, 2012
• M. Asif, K. Chandra, P.S. Misra
• Citations: 4 (Details)

• Effect of Some Plating Variables on Zinc Coated Low Carbon Steel Substrates, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.13, 2011
• Bamidele M. Durodola, Joseph A.O. Olugbuyiro
• Citations: 4 (Details)

• Studies on the Effect of Ba²⁺ on Growth, structural, Morphology, Optical, and Mechanical Properties of L-Valinium Picrate, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.10, 2011
• K. Russel Raj, P. Murugakoothan
• Citations: 4 (Details)

• Spectro-Structural Characterization of Chalcogenide Films Containing Cd, Te and Se, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.11, 2011
• T.M. Rajakumar, C. Sanjeeviraja, R. Chandramani
• Citations: 4 (Details)

• Electrostatic Separation as a Characterizing Tool for the Insulation of Conductive Mineral Particles, Journal of Minerals and Materials Characterization and Engineering, Vol.2 No.3, 2014
• Philippe Bébin, Dave Mavrovic, Annie Rochette
• Citations: 4 (Details)

• A Study on Microhardness, Microstructure and Wear Properties of Plasma Transferred Arc Hardfaced Structural Steel with Titanium Carbide, Journal of Minerals and Materials Characterization and Engineering, Vol.2 No.3, 2014
• Balamurugan Sivaramakrishnan, Murugan Nadarajan
• Citations: 4 (Details)

• Studies on the Synthesis, Growth and Characterization of ([Paranitrophenyl]Imino)Benzene NLO Crystal by Sankaranarayanan-Ramasamy Method, Journal of Minerals and Materials Characterization and Engineering, Vol.1 No.3, 2013
• S. Anbarasu, T. Kishore Kumar, Prem Anand Devarajan
• Citations: 4 (Details)

• Characterization and Application of Naturally Occurring Mineral Based Pigment in Surface Coating, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.11, 2012
• Shweta Umale, Prakash Mahanwar
• Citations: 4 (Details)

• Value Addition to Red Sediment Placer Sillimanite Using Microwave Energy and in Depth Structural and Morphological Characterization of Mullite, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.11, 2012
• Satya Sai Srikant, Saroj Kumar Singh, Partha Sarathi Mukherjee, Raghupatruni Bhima Rao
• Citations: 4 (Details)

• Effect of Tin Tailings on Some Refractory Properties of Alumino-Silicates (Alkaleri) Clay, Journal of Minerals and Materials Characterization and Engineering, Vol.1 No.2, 2013
• Victor Sunday Aigbodion, Clement Uche Atuanya, Chikaodi Cynthia Daniel Mkpume
• Citations: 4 (Details)

• A Mathematical Model of an Evaporative Cooling Pad Using Sintered Nigerian Clay, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.11, 2012
• Chukwuneke Jeremiah Lekwuwa, Ajike Chinagorom Ogbu, Achebe Chinonso Hubert, Okolie Paul Chukwulozie
• Citations: 4 (Details)

• Identification of Growth Promoter to Fabrication SiCp/Al₂O₃ Ceramic Matrix Composites Prepared by Directed Metal Oxidation of An Al Alloy, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.11, 2012
• Malkapuram Devaiah, Thodeti Srihari, Thankappan Pillai Rajasekharan
• Citations: 3 (Details)

• TL Glow Curve Study, Kinetics, PL and XRD Analysis of Mn²⁺ Doped CaAl₂O₄ Phosphors, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.11, 2012
• Jagjeet Kaur, Nemana Subramanyam Suryanarayana, Beena Jaykumar, Vikas Dubey, Ravi Shrivastava, Huma Nazli Baig
• Citations: 3 (Details)

• Optimization of Electrical Parameters for Production of Carbon Nanotubes, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.10, 2012
• Sayantan Chattopadhyay, Kalyan Kumar Singh
• Citations: 3 (Details)

• Effects of Graphite Additions and Heat Treatment on the Microstructure, Mechanical and Tribological Properties of 13% Chromium White Iron, Journal of Minerals and Materials Characterization and Engineering, Vol.2 No.4, 2014
• J. O. Agunsoye, S. A. Bello, I. O. Awe, A. A. Yekinni, R. G. Adeyemo, A. O. Ologunagba
• Citations: 3 (Details)

• Studies on the Effect of Zinc Chloride Mixing on Bisthiourea Cadmium Chloride Crystals, Journal of Minerals and Materials Characterization and Engineering, Vol.1 No.6, 2013
• R. S. Sundararajan, M. Senthilkumar, C. Ramachandraraja
• Citations: 3 (Details)

• The Study of Reaction Sequences for Formation of Solid Solution of Ceramic Material: Pb_1-2XSm_xNd_x[(Zr_0,55Ti_0,45)_1-0.02,0.01(Y_2/3,Mo_1/3),0.01 (Y_2/3,Ni_1/3)]O₃ and the Study of These Structures, Journal of Minerals and Materials Characterization and Engineering, Vol.1 No.5, 2013
• Oum Keltoum Kribaa, Ahmed Boutarfaia
• Citations: 3 (Details)

• The Microstructure and Oxidation Resistance of The Microstructure and Oxidation Resistance of Slurry Method on Rene 80 Superalloy, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.7, 2012
• Marek Goral
• Citations: 3 (Details)

• Mechanical Properties of Hybrid Cementitous Composites, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.4, 2012
• I.O. Oladele, A.D. Akinwekomi, U. Donatus
• Citations: 3 (Details)

• Effect of Buffer Solutions on the Flow and Fracture in Calcite, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.3, 2009
• S.O.O. Olusunle, W.O. Siyanbola, A.R. Adetunji, O.O. Adewoye
• Citations: 3 (Details)

• Nucleation Reduction Strategy of SrNH₄MgHPO₄ (Strontium Ammonium Magnesium Hydrogen Phosphate) Crystal Growth in Silica Gel Medium and Its Characterization Studies, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.6, 2009
• J. Kishore Kumar, R. Ramesh, G. Kanchana, P. Suresh, P. Sundaramoorthi
• Citations: 3 (Details)

• Thermo-Mechanical Processing of Iron-Phosphorous-Carbon Alloys, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.1, 2011
• Yashwant Mehta, P. S. Mishra
• Citations: 3 (Details)

• Effect of Tsunami in the Ilmenite Population: An Examination through X-Ray Diffraction, Scanning Electron Microscopy and Inductively Coupled Plasma Atomic Emission, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.11, 2010
• Babu Nallusamy, Sinirani Babu, M. Sundararajan, P. Seralathan, R. Bhima Rao, P.N. Mohan Das
• Citations: 3 (Details)

• Performance of Nickel-Coated Manganese Steel in High-Chloride Low-Sulphate Seawater Environments, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.10, 2010
• O. E. Olorunniwo, P. O. Atanda, K. J. Akinluwade, A.R. Adetunji, K.M. Oluwasegun
• Citations: 3 (Details)

• Apatite Microstructure and Composition in Manganese Formation of Eastern Ghats, Orissa, India, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.5, 2011
• Subhasmita Jena, B.K. Mohapatra, P. P. Singh
• Citations: 3 (Details)

• Metal Extraction Process for High Grade Stibnite of Kharan (Balochistan Pakistan), Journal of Minerals and Materials Characterization and Engineering, Vol.5 No.1, 2017
• Irfan Hafeez, Saqib Nasir, Samreen Zahra, Muhammad Aamir, Zahid Mahmood, Adnan Akram
• Citations: 3 (Details)

• Development of a Novel Oven-Furnace, Journal of Minerals and Materials Characterization and Engineering, Vol.5 No.2, 2017
• Olaniyi Gladius Babatunde, Rufus Sola Fayose, Ayodele Abeeb Daniyan, Theresa Chikwuo Ezenwafor, Ebenezer Olubanji Oniya, Nathaniel O. Ajayi, Kunle Michael Oluwasegun, Akintoye Oni Adedeji, Akintunde Ajenifuja, Arinola Gift Akinseloyin, Adelana Razak Adetunji, Samuel Oloruntoba Olugbenga Olusunle
• Citations: 3 (Details)

• Effect of Beryllium Aluminum Cyclosilicate on Thermal Expansion Behavior of Al-Based Composites, Journal of Minerals and Materials Characterization and Engineering, Vol.5 No.3, 2017
• V. Bharat, B. Durga Prasad, K. Venkateswarlu
• Citations: 3 (Details)

• Fabrication and Analysis of Vanadium-Based Metal Powders for Selective Laser Melting, Journal of Minerals and Materials Characterization and Engineering, Vol.6 No.1, 2018
• Jialin Yang, Jingfeng Li
• Citations: 3 (Details)

• Chemical Characterization of Auriferous Ores from the Brazilian State of Paraiba, Journal of Minerals and Materials Characterization and Engineering, Vol.3 No.1, 2015
• Marcelo Rodrigues do Nascimento, Artur M. G. Lourenço
• Citations: 3 (Details)

• Analysis on the Spinning Process and Properties of Tencel Yarn, Journal of Minerals and Materials Characterization and Engineering, Vol.3 No.1, 2015
• Ya Wang, Dudi Gong, Yan Bai, Yunqi Zhai
• Citations: 3 (Details)

• Suitability of Some Selected Clay Deposit from Edo, Ogun, Ondo and Ekiti State of Nigeria for Ceramic Water Filters Production, Journal of Minerals and Materials Characterization and Engineering, Vol.4 No.1, 2016
• Smart Adeleye Olubayode, Olufiropo Samson Awokola, Enoch Olugbenga Dare, Olubayo Timothy Olateju
• Citations: 3 (Details)

• Analysis on Multi Responses in Face Milling of Ammc Using Fuzzy-Taguchi Method, Journal of Minerals and Materials Characterization and Engineering, Vol.3 No.4, 2015
• Madiri Samuel Sukumar, Borra Vijay Sudheer Reddy, P. Venkataramaiah
• Citations: 3 (Details)

• Sintering and Wear Behavior of a FeCrCB Hardfacing Alloy Applied by Tape Casting: A Study of Cooling Rate Effect, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.5, 2020
• Fernando Valenzuela de la Rosa, Roal Torres Sánchez, José T. Holguín-Momaca, Carlos Domínguez Ríos, Alfredo Aguilar Elguezabal
• Citations: 3 (Details)

• The Use of Molecular-Sieving Materials as Ameliorant for Peat Degradation in the Tropics, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.4, 2021
• Laksmita P. Santi, Didiek H. Goenadi, Supiandi Sabiham, Yazid Bindar
• Citations: 3 (Details)

• Usability of a Natural Tuff as Admixture in Clinker and Its Influence on the Physico-Chemical and Mechanical Properties of Mortar, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.5, 2021
• Lamine Zerbo, Moustapha Sawadogo, Youssouf Sawadogo, Salfo Salogo, Moussa Ouedrago, Mohamed Seynou, Gisèle Lecomte-Nana, Philippe Blanchart
• Citations: 3 (Details)

• Effect of the Substitution of Sand by Rubber of Waste Tires on the Mechanical Properties of Hydraulic Concrete and Exposure to Gamma Radiation, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.3, 2021
• Jesús M. Colín de la Cruz, Carmen Gabriela Guzmán, Fermín Castillo Mejía, Benjamin Leal Acevedo, Osvaldo Flores Cedillo, Isabel Gamboa de Buen, Arturo Molina Ocampo, Horacio Martínez Valencia
• Citations: 3 (Details)

• Study Correlation between Physical-Mineralogical Properties of Sandstone Used in Ptolemaic Temples in Upper Egypt and Its Weathering Resistance, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.5, 2022
• Essam H. Mohamed
• Citations: 3 (Details)

• Characterization of the Activity, Mineralogy and Correlations between the Properties of Clayey Soils, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.5, 2022
• Louis Ahouet, Sorel Dzaba, Brice Dublin Mbossa Elenga, Sylvain Ndinga Okina, Fabien T. Kimbatsa
• Citations: 3 (Details)

• Evolution of Nonmetallic Inclusion during Steelmaking Process of Cold Heading Steel SWRCH35K, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.5, 2022
• Mengxiong Li, Qi Xu, Jianli Li
• Citations: 3 (Details)

• Synthesis and Characterization of Gadolinium Oxide-Hematite Magnetic Ceramic Nanostructures, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.1, 2023
• Sarah Glasser, Andrew J. Craig, Felicia Tolea, Mihaela Sofronie, Jennifer A. Aitken, Monica Sorescu
• Citations: 3 (Details)

• Characterization of Two Clay Raw Materials from Côte d’Ivoire with a View to Enhancing Them in Eco-Construction, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.2, 2022
• Lébé Prisca M.-S. Kouakou, Alfred Niamien Kouamé, Bi Irié Hervé Gouré Doubi, Namory Méité, Jean Thierry Kangah, Esmel Privat Zokou, Léon Koffi Konan, Yao Jonas Andji-Yapi
• Citations: 3 (Details)

• Valorization of Pozzolans as Partial Additive of Portland Cement: A Case of Pozzolans from the Localities of Foumbot, Penja and Tombel (Cameroon), Journal of Minerals and Materials Characterization and Engineering, Vol.7 No.1, 2019
• Mambou Ngueyep Luc Leroy, Njimboum Aboubakar Sidiki, Tchakouteu Mbakop Théophile, Mache Jacques Richard
• Citations: 3 (Details)

• Removal of Silica and Alumina as Impurities from Low-Grade Iron Ore Using Wet High-Intensity Magnetic Separation and Reverse Flotation, Journal of Minerals and Materials Characterization and Engineering, Vol.6 No.3, 2018
• Kazutoshi Haga, Moses Charles Siame, Atsushi Shibayama
• Citations: 3 (Details)

• Adding Hydrated Lime in a Material Made of Clayey Soil and Fibres: Formulation and Effects on Thermo-Mechanical Properties, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.3, 2020
• Fati Zoma, Fabien H. Yonli, Etienne Malbila, David Y. K. Toguyeni, Ivon B. Hassel
• Citations: 3 (Details)

• The Zinc Story under High Pressure, Journal of Minerals and Materials Characterization and Engineering, Vol.7 No.5, 2019
• Kenichi Takemura
• Citations: 3 (Details)

• Preparation of Zn²⁺-Chelated Carboxymethyl Poly(1-Vinylimidazole) for Intracellular Zn²⁺ Delivery, Journal of Minerals and Materials Characterization and Engineering, Vol.7 No.5, 2019
• Akito Endo, Shoichiro Asayama
• Citations: 3 (Details)

• Mineralogical Characterization of Aeolian Sands from Inner Mongolia, China, Journal of Minerals and Materials Characterization and Engineering, Vol.7 No.3, 2019
• Brian Nzuki, Liqun Luo, Pengfei Zhou, Christophe Niyonzima, Xu Tu
• Citations: 3 (Details)

• Impact of ZnO Nano Materials on Medicinal Black Rice Seed Germination, Journal of Minerals and Materials Characterization and Engineering, Vol.7 No.4, 2019
• Shubhangi Mahajan, Shilpa Barthwal, Manpreet Kaur Attri, Sneh Bajpai, Surbhi Dabral, Manika Khanuja, Ajit Varma
• Citations: 3 (Details)

• Aging Behaviours of 8011 Al and 8011 Al/15% SiCp Composites, Journal of Minerals and Materials Characterization and Engineering, Vol.7 No.5, 2019
• V. Vembu
• Citations: 2 (Details)

• Hydrophobicity of Highly Ordered Nanorod Polycrystalline Nickel and Silver Surfaces, Journal of Minerals and Materials Characterization and Engineering, Vol.7 No.5, 2019
• Jan Macko, Natália Podrojková, Radim Hrdý, Andrej Oriňak, Renáta Oriňaková, Jaromír Hubálek, Jaroslav Vojtuš, Zuzana Kostecká, Roger M. Smith
• Citations: 2 (Details)

• Reduction Characteristics of High Phosphorus Iron Ore in Reducing Parameters Similar to Blast Furnace Conditions, Journal of Minerals and Materials Characterization and Engineering, Vol.7 No.5, 2019
• Heba Al-Kelesh, M. I. Nasr
• Citations: 2 (Details)

• Synthesis, Growth and Characterization of an Organic Material: P-Chloroanilinium Ethanoate, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.3, 2020
• R. Sakunthaladevi, L. Jothi
• Citations: 2 (Details)

• Scientific Investigation of the Paintings from the Agarbiciu (Cluj County) Wooden Church, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.4, 2020
• Constantin Măruțoiu, Ioan Bratu, Olivia Florena Nemeș, Dan Nemeș, Călin Neamțu, Zaharie Moldovan, Teofil Tia, Ilina Udrea, Cristian Tigae
• Citations: 2 (Details)

• Compositional, Structural, Surface Characterizations of Natural Magnetite from Air Massif (Niger) in Relation to Its Catalytic Activity, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.4, 2020
• Mamane Souley Abdoul Aziz, Adouby Kopoin, Ousmane Mahamane Sani
• Citations: 2 (Details)

• Bismuth Oxide Carbonate Structures Synthesized by Microwave—Assisted Solvothermal Approach and Its Use as Catalyst for the Degradation of Azo Dye in a Solution, Journal of Minerals and Materials Characterization and Engineering, Vol.7 No.6, 2019
• M. A. Luna-Alvarado, M. Estrada-Flores, M. E. Manríquez-Ramírez, C. M. Reza-San Germán
• Citations: 2 (Details)

• Determination of the Calcination Procedure Required to Activate Edda Clay for Optimal Leaching of Alumina, Journal of Minerals and Materials Characterization and Engineering, Vol.7 No.2, 2019
• Udochukwu Mark, Charles Nwachukwu Anyakwo, Okechukwu Onyebuchi Onyemaobi, Chijioke Samson Nwobodo
• Citations: 2 (Details)

• Jebel Kurun Phosphate Rock Characteristics and Technical Viability to Produce Phosphoric Acid, Journal of Minerals and Materials Characterization and Engineering, Vol.6 No.5, 2018
• Mohamed E. Elmahdi, Kamil M. Wagialla
• Citations: 2 (Details)

• Mechanical Properties, Metallurgical Characteristics and Anisotropy of Additive Manufacturing of 316L, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.2, 2022
• D. Moreno, Y. Nahmana, O. Nafman, O. Kam, B. Wolfman, A. Y. Cohen, M. Shapira
• Citations: 2 (Details)

• Influence of Machining Parameter on Surface Roughness and Tool Life While Machining EN24 Grade Alloy Steel, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.3, 2022
• Chand R. Prem, T. V. Sreerama Reddy
• Citations: 2 (Details)

• Solar Photocatalysis of TiO₂ Supported Natural Palygorskite Nanofibers Elaborated by a One_Pot Mechanochemical Route, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.3, 2022
• Lakbita Omar, Rhouta Benaissa, Goetz Vincent, Maury Francis, Plantard Gaël, Daoudi Lahcen
• Citations: 2 (Details)

• Synthesis and Controllable Growth Dynamics of Third Order Nonlinear Optical Material of 2-Amino-4-Methylpyridinium 2-Chloro 4-Nitro Benzoate Electro-Mechanical Investigation and Device Fabrication, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.5, 2021
• Kuppan Venkatesan, Lakshmanan Jothi
• Citations: 2 (Details)

• Titanium Carbide Effects on the Fracture of Inconel 100—A Case Study, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.5, 2021
• Daniel Moreno, Ori Kam, Boris Wolfman, Orel Nafman, Shir Abrahami, Ariel Cohen, Yochanan Nachmana, Zion Harush, Moshe Shapira
• Citations: 2 (Details)

• Morphology Study of Particle Breakage Mechanisms in a Horizontal Stirred Mill: Automated and Manual Point Counting Approaches, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.5, 2021
• Reem Roufail, Bern Klein
• Citations: 2 (Details)

• Physico-Chemical and Mineralogical Characterizations of Two Togolese Clays for Geopolymer Synthesis, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.5, 2022
• Komla Mawoulikplim Anove, Sanonka Tchegueni, Koffi Agbegnigan Degbe, Koffi Fiaty, Moursalou Koriko, Patrick Drogui, Gado Tchangbedji
• Citations: 2 (Details)

• Effects of the Solution Treatment on Microstructural Evolution, Mechanical Properties, and Fracture Mechanism of Nickel-Based GH4099 Superalloy, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.6, 2021
• Guangsheng Xu, Chuan Wu, Zhenhua Liu, Yilong Wang, Zhanying Zhang, Yun Li, Ping Hu
• Citations: 2 (Details)

• Mineralogy, Petrography and Geochemistry of the Ina Syenite (Linté, Central Cameroon) as a Source of Industrial Feldspars, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.3, 2022
• Soualiou Njimbouombouo Mouliom, André Njoya, Rose Yongue Fouateu, Nguo Silvestre Kanouo, Daniel Lamilen Mbila, Bernard Charlier, Nathalie Fagel
• Citations: 2 (Details)

• Literature Review of the Use of Zinc and Zinc Compounds in Paper-Based Microfluidic Devices, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.3, 2021
• Amer Charbaji, Hojat Heidari-Bafroui, Constantine Anagnostopoulos, Mohammad Faghri
• Citations: 2 (Details)

• Flotation-Calcination-Magnetic Separation Hybrid Process for Concentration of Rare Earth Minerals Contained in a Carbonatite Ore, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.3, 2021
• Tesfaye Negeri
• Citations: 2 (Details)

• Development and Characterization of Carbon Nanotube Reinforced Aluminium-6061 Metal Matrix Composites, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.3, 2021
• Preethi. K, Raju T.N, Shivappa H.A
• Citations: 2 (Details)

• Alkaline Pre-Treatment of Coal Fly Ash as Bio-Silica Fertilizer, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.2, 2021
• Laksmita P. Santi, Didiek H. Goenadi, Donny N. Kalbuadi, Indah P. Sari,   Sulastri
• Citations: 2 (Details)

• Analysis of Roof Failure at the Intersections on a Coal Mining, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.5, 2021
• Andre C. Zingano, Marcelo Andrade
• Citations: 2 (Details)

• Influence of Machining Parameter on Tool Life While Machining Hybrid Metal Matrix Composites, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.6, 2020
• C. R. Prakash Rao, V. Ravi Kumar, D. V. Ravi Kumar, Poorna Chandra, M. Vedavyasa, M. S. Rajagopal
• Citations: 2 (Details)

• Biotemplate Assisted Nano Titania and Its Environmental Performance, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.6, 2020
• N. Saikumari, S. Monish Dev, S. Avinaash Dev
• Citations: 2 (Details)

• The Prospects of Uganda’s Iron Ore Deposits in Developing the Iron and Steel Industry, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.4, 2020
• Muwanguzi J. B. Abraham, Rukezo Gift, Sebukeera Hennery, Guloba Asuman, Ajidiru Rita, Dumba Dexter, Muvawala Joseph
• Citations: 2 (Details)

• Experimental Evaluation of the Mechanical Properties of Recycled Low Density Polyethylene/Bean Pod Ash Particulate Bio-Composites, Journal of Minerals and Materials Characterization and Engineering, Vol.3 No.5, 2015
• M. C. Ekwedigwe, E. E. Nnuka, C. U. Atuanya
• Citations: 2 (Details)

• Silica and Iron Recovery from a Residue of Iron Ore Flotation, Journal of Minerals and Materials Characterization and Engineering, Vol.5 No.4, 2017
• P. F. F. Martins, C. A. Morais, F. S. Lameiras, R. O. Albuquerque
• Citations: 2 (Details)

• Physicochemical Characterization of Coal Tar Produced by Pyrolysis of Coal from Garin Maiganga and Shankodi Deposits, Journal of Minerals and Materials Characterization and Engineering, Vol.5 No.5, 2017
• Sori Ronald Makan, Jock Asanja Alexander, Ryemshak Akila Solomon, Ambayin Nuhu Manasseh, Ishaku Emmanuel Mbaya, Putshaka Danladi Julius
• Citations: 2 (Details)

• Effect of MnO on Mineral Composition of CaO-SiO₂-MgO-Al₂O₃-Cr₂O₃ System, Journal of Minerals and Materials Characterization and Engineering, Vol.5 No.3, 2017
• Yue Yu, Jianli Li, Mengxiong Li, Zhengliang Xue
• Citations: 2 (Details)

• Comparative Analysis of the Effects of Pressure on the Mechanical Properties and Microstructure of Die Cast Aluminum Alloys, Journal of Minerals and Materials Characterization and Engineering, Vol.4 No.6, 2016
• Kenneth N. Obiekea, Shekarau Y. Aku, Danjuma S. Yawas
• Citations: 2 (Details)

• Tennantite and Enargite Rejection in the Copper Flotation—A Mini-Review, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.3, 2023
• Shiqing Zhou, Tengfei Li, Chao Wang, Zhiyong Tan, Xiaoqiang Guan, Haibin Li, Wei Zhang
• Citations: 2 (Details)

• Mechanical and Microstructural Characteristics of the Fiber-Reinforced Composite Materials, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.6, 2022
• Yanbing Pan
• Citations: 2 (Details)

• Modeling Grain Structures of Some Carbon Steels using Voronoi Tesselation, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.3, 2011
• O.O. Oluwole, A.L. Akinkunmi
• Citations: 2 (Details)

• Effect of Heat Treatment on Fe–0.3%P–0.14%C Alloy, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.9, 2010
• Yashwant Mehta, K. Chandra, Rajinder Ambardar, P. S. Mishra
• Citations: 2 (Details)

• The Galerki Approach for Finite Elements of Field Functions: The Case of Buckling in GRP, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.4, 2010
• Chukwutoo Christopher Ihueze
• Citations: 2 (Details)

• Characterization of Sulphides Patches from the Neyveli Lignite Deposit, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.3, 2009
• D.S. Rao, R. Nagendra, E. Rasool Mohideen, B.R. Nayak
• Citations: 2 (Details)

• Porous Bulk Metallic Glass Fabricated by Powder Consolidation, Journal of Minerals and Materials Characterization and Engineering, Vol.7 No.2, 2008
• Z.Y. Suo, S.W. Liu, L. Zhang, H. L. Gao, H. Y. Zhang, K. Q. Qiu
• Citations: 2 (Details)

• Method for Estimation of Na₂O and K₂O in Ores, Fluxes, Coal and Coke Ash by Inductively Coupled Plasma-Atomic Emission Spectroscopy, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.1, 2009
• S. Sarkar, V.V.V. Subrahmanyam
• Citations: 2 (Details)

• In-Vitro Studies of Artificially Removed Human Renal Stone Minerals by Sonic Engineering Approach-I, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.1, 2009
• G. Kanchana, P. Sundaramoorthi, G.P. Jeyanthi
• Citations: 2 (Details)

• Nanoindentation Study on Tourmaline, Journal of Minerals and Materials Characterization and Engineering, Vol.5 No.1, 2006
• M.O. Adeoye, O.O. Adewoye
• Citations: 2 (Details)

• Analysis Of Gem-Quality And Experimental Estimation Of Toleration Ranges In Geometrical Features Of Brilliant Type Cut Diamonds, Journal of Minerals and Materials Characterization and Engineering, Vol.4 No.2, 2005
• J. Audy, K. Audy, T. Haines
• Citations: 2 (Details)

• In-vitro Studies of Artificially Removed Human Renal Stones in the Economic Age Group (30-40years), Journal of Minerals and Materials Characterization and Engineering, Vol.6 No.2, 2007
• P. Sundaramoorthi, S. Kalainathan, G. Kanchana, R. Santhi
• Citations: 2 (Details)

• Investigation Of Hardness Anisotropy In Tourmaline, Journal of Minerals and Materials Characterization and Engineering, Vol.3 No.2, 2004
• M.O. Adeoye, O.O. Adewoye
• Citations: 2 (Details)

• Characterization of Spent Prebaked Aluminium Carbon Anode as a Source of Fuel for Foundrymen, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.1, 2012
• A. Andrews, E. Gikunoo, B. K. Kyei-Fram, R. Sarfo
• Citations: 2 (Details)

• The Effect of Cobalt Mixing on Pure Copper Mercury Thiocyanate Nonlinear Optical Crystal, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.7, 2012
• B. Vijayabhaskaran, C.Ramachandra Raja
• Citations: 2 (Details)

• Surface Characterization of Metallic Particles in Printed Circuit Board Comminution Fines and the Processing Implication, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.6, 2012
• Iyiola Olatunji Ogunniyi, M. K. G. Vermaak, Dick Groot
• Citations: 2 (Details)

• A Model for FeSiMg Alloy Production by Reduction Technique, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.9, 2011
• Saeed Nabil Saeed Ghali
• Citations: 2 (Details)

• Phosphorus Degradation Capability of Aspergillus terreus on Nigeria’s Agbaja Iron Ore, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.12, 2011
• C.N. Anyakwo, O.W. Obot
• Citations: 2 (Details)

• Quantification of Phases in Lahore (Pakistan) Airborne Particulates by Matrix-Flushing Method, Journal of Minerals and Materials Characterization and Engineering, Vol.1 No.4, 2013
• Naveed Ahmad, Khadim Hussain, Shahzad Naseem
• Citations: 2 (Details)

• Influence of Semi-Solid Isothermal Heat Treatment on Microstructure of Gray Cast Iron, Journal of Minerals and Materials Characterization and Engineering, Vol.1 No.6, 2013
• Naglaa Fathy
• Citations: 2 (Details)

• The Effects of Blends of Enugu Coal and Anthracite on Tin Smelting Using Nigerian Dogo Na Hauwa Cassiterite, Journal of Minerals and Materials Characterization and Engineering, Vol.1 No.6, 2013
• Fatai Afolabi Ayeni, OladunniOyelola Alabi, Rose Okara
• Citations: 2 (Details)

• Mineralogical Horizon (A) Evaluation of a Toposequence of Soils Derived from Basalt by Thermal Analysis, Journal of Minerals and Materials Characterization and Engineering, Vol.2 No.5, 2014
• Wilson Sacchi Peternele, Antonio Carlos Saraiva da Costa
• Citations: 2 (Details)

• Effect of Shakeout Time on Microstructure and Hardness Properties of Grey Cast Iron, Journal of Minerals and Materials Characterization and Engineering, Vol.2 No.4, 2014
• Saliu Ojo Seidu, Daniel Toyin Oloruntoba, Iyiola Olatunji Otunniyi
• Citations: 2 (Details)

• Computational Approach to Modelling Fracture Behaviour of Polypropylene/Talc Composites, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.8, 2012
• Chinedum Ogonna Mgbemena, ObuoraAnozie Okoye
• Citations: 2 (Details)

• Growth and Characterization of Dichloro Tris(Triphenyl Phosphine Oxide)Cadmium(II) —Second Harmonic Generation from a Centrosymmetric Crystal, Journal of Minerals and Materials Characterization and Engineering, Vol.1 No.1, 2013
• K. Sreevani, K. Thangaraj, K. Ramamurthi, S. Selvanayagam, B. Sridhar, V. V. Anierudhe
• Citations: 2 (Details)

• Comparative Phosphorus Removal Capabilities of Eurotium Herbarorium and Clostridium Species on Nigeria’S Agbaja Iron Ore, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.8, 2012
• O. W. Obot, C. N. Anyakwo
• Citations: 1 (Details)

• Effect of Chromium on the Corrosion Behavior of Powder-Processed Fe-0.6 wt % P Alloys, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.9, 2012
• Yashwant Mehta, Shefali Trivedi, K. Chandra, P.S. Mishra
• Citations: 1 (Details)

• Weldability Assessment of Preheated Ductile Iron Microstructures, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.10, 2012
• Dakwa Yusufu Kwa, Joseph Olatunde Borode, Itopa Monday Momoh
• Citations: 1 (Details)

• Crystallographic Study of Uranium-Thorium Bearing Minerals in Tranomaro, South-East Madagascar, Journal of Minerals and Materials Characterization and Engineering, Vol.1 No.6, 2013
• Frank Elliot Sahoa, Naivo Rabesiranana, Raoelina Andriambololona, Nicolas Finck, Christian Marquardt, Hörst Geckeis
• Citations: 1 (Details)

• Comparative Spectroscopic Studies on Pure, 10 and 50 mol% Glycine Mixed L-Valinium Picrate Crystals, Journal of Minerals and Materials Characterization and Engineering, Vol.2 No.1, 2014
• Antony A. Joseph, John David I. Ebenezar, Ramachandra C. Raja
• Citations: 1 (Details)

• Geotechnical and Mineralogical Characterization of Soils Derived from Schist along Shango-Chanchaga Highway, Minna, Central Nigeria, Journal of Minerals and Materials Characterization and Engineering, Vol.1 No.6, 2013
• Salome Hephzibah Waziri, Abdullahi Idris-Nda, Irmiya Samson Amoka, Yusuf Ishaq
• Citations: 1 (Details)

• Model for Periodic Analysis of the Quantity of Water Evaporated during Thermo-processing of Clay Designated for Production of Oven Refractory, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.13, 2011
• C. I. Nwoye, B. C. Chukwudi, P. C. Agu, C. C. Ugwuegbu
• Citations: 1 (Details)

• Simulation of Torque during Rod Rolling of HC SS316 at Low Strain Rate Using “Phantom-Roll” Method, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.15, 2011
• P. O. Aiyedun, O. S. Igbudu, B.O. Bolaji
• Citations: 1 (Details)

• Effect of Chromium on Magnetic Characteristics of Powder Processed Fe-0.35wt%P Alloy, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.7, 2011
• Deepika Sharma, Kamlesh Chandra, Prabhu Shankar Misra
• Citations: 1 (Details)

• Investigation of Properties of Thixoprocessed LM4, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.1, 2012
• A.V. Adedayo, S.A. Ibitoye, O.O. Oluwole, K.M. Oluwasegun
• Citations: 1 (Details)

• An Investigation Into The Sintering Of Magnesium Fluoride Optical Material By Microwave, Journal of Minerals and Materials Characterization and Engineering, Vol.3 No.2, 2004
• Shangzhao Shi, Jiann-Yang Hwang, Bowen Li, Xiaodi Huang
• Citations: 1 (Details)

• Nanoporous Structure and Enhanced Thermal Stability of a Polyimide/Single-Walled Carbon Nanotube Composite, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.1, 2009
• Gerard T. Caneba
• Citations: 1 (Details)

• Laser Irradiated Nucleation Reduction Strategy of AMHP (Ammonium Magnesium Hydrogen Phosphate, In-Vivo Approach-1) Crystals in Gel Medium and its Characterization Studies, Journal of Minerals and Materials Characterization and Engineering, Vol.7 No.3, 2008
• G. Kanchana, P. Sundaramoorthi, G.P. Jeyanthi
• Citations: 1 (Details)

• Elucidation on Reactions Thermodynamics and Kinetics of OFC-A of Steels, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.7, 2010
• A.V. Adedayo
• Citations: 1 (Details)

• Effect of Solidification Process Parameters on the Microstructure of Some Meltspun Nickel-Based Hardfacing Alloys, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.10, 2009
• J. A. Ajao
• Citations: 1 (Details)

• Finite Elements Approaches in the Solution of Field Functions in Multidimensional Space: A Case of Boundary Value Problems, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.10, 2010
• Chukwutoo Christopher Ihueze, Okafor Emeka Christian, Edelugo Sylvester Onyemaechi
• Citations: 1 (Details)

• Investigation of the Effect of the Addition of Petroleum Waste to Interlocking Bricks Constituent, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.4, 2011
• P. O. Atanda, O. O. Oluwole, I. D. Olumor
• Citations: 1 (Details)

• Physico-Chemical Characterization of Two Dabou Clays with a View to Use Them in the Treatment of Dyeing Wastewater, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.6, 2022
• Wilfried Aristide Atsé, Marc Marie-Maurice Mélèdge Essi, Bi Irié Hervé Gouré Doubi, Mahamadou Kamagaté, Aké Pierre Aké, Alfred Niamien Kouamé
• Citations: 1 (Details)

• Physic, Chemical and Mineralogical Characterizations of Clays Used in the Making of Traditional Ceramics in the City of Katiola, C ôte d’Ivoire, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.4, 2023
• Isabelle Linda He, Grah Patrick Atheba, N’guadi Blaise Allou, Patrick Drogui, My Ali El Khakani, Gildas Komenan Gbassi
• Citations: 1 (Details)

• Developing Recipe from Local Ceramic Raw Materials for Making Crucibles in Ghana, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.4, 2023
• Kofi Asante-Kyei, Alexander Addae, Ahmed Aflo
• Citations: 1 (Details)

• Optimisation of Thermal Comfort of Building in a Hot and Dry Tropical Climate: A Comparative Approach between Compressed Earth/Concrete Block Envelopes, Journal of Minerals and Materials Characterization and Engineering, Vol.12 No.1, 2024
• Arnaud Louis Sountong-Noma Ouedraogo, Césaire Hema, Sjoerd Moustapha N’guiro, Philbert Nshimiyimana, Adamah Messan
• Citations: 1 (Details)

• Numerical Simulation and Experimental Characterization of Clay Paste under Loads for Energy Saving in Clay Materials Processing, Journal of Minerals and Materials Characterization and Engineering, Vol.4 No.2, 2016
• Brahiman Traore, Kokou Esso Atcholi, Ouro-Djobo Samah, Samuel Gomes, Tibi Beda
• Citations: 1 (Details)

• The Massive Sulfide Deposit of Siirt Madenköy, South-Eastern Turkey, Journal of Minerals and Materials Characterization and Engineering, Vol.6 No.2, 2018
• Dicle Bal-Akkoca, Hüseyin Çelebi
• Citations: 1 (Details)

• Study of Durability of Siliceous Sand Based Mortars in Togo, and of Binder of Plastic Bags of the Kind “Voltic”: Hydrocarbons’ Effect, Journal of Minerals and Materials Characterization and Engineering, Vol.6 No.1, 2018
• Kossi Bollanigni Amey, Ouro-Djobo Samah, Kouma Neglo, Abalo P’Kla, Komi Mawutodzi Sounsah, Komlan Amoussou, A. Vianou
• Citations: 1 (Details)

• Characterization of Natural Vuggy Fractured Porous Medium: Its Physicochemical Properties, Porosity and Permeability, Journal of Minerals and Materials Characterization and Engineering, Vol.6 No.1, 2018
• E. T. Romero-Guzmán, L. R. Reyes-Gutiérrez, J. Klapp, H. Hernández-Mendoza
• Citations: 1 (Details)

• Characterization of Metallic Formation on Ion Exchange/Chelating Resins by Various Metal Groups and Extrapolation to Molecular Models, Journal of Minerals and Materials Characterization and Engineering, Vol.6 No.1, 2018
• Sean Dudley, Recep Avci, William Gleason, William Hill, Jacob Howery, Miles Jaqua, Daisy Margrave
• Citations: 1 (Details)

• Mineralogical and Geochemical Characteristics of Caprock Formations Used for Storage and Sequestration of Carbon Dioxide, Journal of Minerals and Materials Characterization and Engineering, Vol.3 No.5, 2015
• Hedi Jedli, Hachem Hedfi, Abdessalem Jbara, Souhail Bouzgarrou, Khalifa Slimi
• Citations: 1 (Details)

• Optical, Thermal and Nonlinear Properties of Tristhiourea Lanthanum Nitrate, Journal of Minerals and Materials Characterization and Engineering, Vol.3 No.3, 2015
• V. S. Kumar, R. S. Sundararajan
• Citations: 1 (Details)

• Enhanced High-Temperature Cycling Stability of LiMn₂O₄ by Coating LiNi_0.5Mn_1.5O₄, Journal of Minerals and Materials Characterization and Engineering, Vol.2 No.6, 2014
• Jing Yan, Wei Liu, Yuelei Wang, Xinxin Zhao, Yiming Mi, Haohan Liu
• Citations: 1 (Details)

• Regression Analysis of Ashaka Clay-Bonded Sand, Journal of Minerals and Materials Characterization and Engineering, Vol.2 No.5, 2014
• Aondona-Paul Ihom, Aniekan Offiong
• Citations: 1 (Details)

• A Magentoelectric Coefficient Measurement System with a Free-Stress Sample Holder, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.4, 2020
• Jingjing Lu, Xiya Wang, Junhao Wang, Yufei Zhou, Duo Chen, Shibo Wang, Maofa Zhang, Xiangbin Zeng
• Citations: 1 (Details)

• Potential of Some Granites from Foumban (West Region of Cameroon) as Fluxing Materials for Ceramics, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.5, 2020
• Njimbouombouo Mouliom Soualiou, Etone Macka Alexandre Dodo, Ondoua Abondo Ebengue Yannick, Che Randy Nangah, Njoya André, Mouncherou Oumar Farouk, Ndigui Billong
• Citations: 1 (Details)

• Utilisation of Indigenous Ceramic Raw Materials for the Production of Water Closet, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.5, 2020
• Z. U. Elakhame, Y. J. Obe, Y. L. Shuaib-Babata, L. K. Bankole, O. J. Omowunmi, I. O. Ambali, O. O. Akinsanya, A. J. Unachukwu, R. G. Adeyemo, M. Ikusedun
• Citations: 1 (Details)

• Experimental Study on Polymer Nanocomposites Based Strain Sensors for Structural Health Monitoring, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.5, 2021
• R. Kiran, K. R. Prakash, Poorna Chandra, V. Ravi Kumar, P. B. Asha, C. R. Prakash Rao
• Citations: 1 (Details)

• Assessment of Relationship of Some Causal Factors Associated with Productivity of Longwall Mining Using Structured Equation Modeling, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.4, 2021
• Sidharth Talan, Ashis Bhattacherjee
• Citations: 1 (Details)

• Dynamic Fracture of a Semi-Crystalline Bio-Based Polymer Pipe: Effect of Temperature, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.3, 2021
• Jean Benoit Kopp, Jeremie Girardot
• Citations: 1 (Details)

• Determination of Airways Resistance, Volumetric Efficiency and Development of Ventilation Model of Rosh Pinah Zinc Mine Namibia, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.2, 2021
• Jeremia Kalenga, Jide Muili Akande
• Citations: 1 (Details)

• Investigation of Pegmatite Mineral Applicability from the Terek Ceramic Deposit in Kyrgyzstan for Production of Porcelain and Earthenware, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.2, 2021
• Mairam Abdullaeva, Bektemir Murzubraimov, Dilbar Altybaeva, Zhypargul Abdullaeva, Gulzada Kalykova, Aishakan Suiunbekova, Aitgul Osmonova
• Citations: 1 (Details)

• Iron Bearing Minerals Flotation from Silica Sand Using Hydroxyl Surfactants, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.4, 2021
• Suzan S. Ibrahim, Wael M. Fathy, Magdy A. Elsayed, Tawfik R. Boulos
• Citations: 1 (Details)

• Sulphuric Acid Bake-Leach Process for the Treatment of Mixed Copper-Cobalt Oxide Ores, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.2, 2022
• Precious Mwamba, Jewette H. Masinja, James Manchisi, Leonard Kabondo
• Citations: 1 (Details)

• Characterization of Clay Materials and Performance Evaluation of Fired Clay Composites Made for Low-Cost Housing, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.4, 2022
• Paulette Cathy Mengue, Michel Mbessa, Rodrigue Cyriaque Kaze, Adeyemi Adesina, Chrispin Pettang
• Citations: 1 (Details)

• Chemical Characterization of Slags from an Old Smelter in Chihuahua, Mexico, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.6, 2022
• Daphne Espejel-García, Vanessa Verónica Espejel-García, Alejandro Villalobos-Aragón
• Citations: 1 (Details)

• Wear Evaluation of Copper-Nickel-Aluminum Alloys under Extreme Conditions, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.1, 2023
• Rene Guardian, Isai Rosales-Cadena, Constancio Diaz-Reyes, Juan Antonio Ruiz-Ochoa
• Citations: 1 (Details)

• Auxetics in Biomedical Applications: A Review, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.2, 2023
• Sean Rose, Dexter Siu, JD Zhu, Reem Roufail
• Citations: 1 (Details)

• Physico-Chemical and Mineralogical Characterizations of Tchiky Clays (Thies, Senegal) for Pharmaceutical Uses, Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.2, 2023
• Rokhaya Sylla Gueye, Nango Gaye, Ousmane Ka, Mamadou Baldé, Adama Diedhiou, Ngoné Diouf, Samba F. Ndoye, Idrissa Ndoye, Yoro Tine, Rokhaya Gueye, Mouhamadou B. Diop, Matar Seck, Djibril Fall, Alassane Welé
• Citations: 1 (Details)

• Pyrometallurgical Removal of Arsenic from Electrostatic Precipitators Dusts of Copper Smelting, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.6, 2021
• Hector Henao, Ignacio Paredes, Rodrigo Diaz, Javier Ortiz
• Citations: 1 (Details)

• Characterization and Pyrometallurgical Removal of Arsenic from Copper Concentrate Roasting Dust, Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.6, 2021
• Hector Henao, Ignacio Paredes, Rodrigo Diaz, Javier Ortiz
• Citations: 1 (Details)

• Suitability of Suluu-Terek Basalt Deposits for Stone Casting, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.1, 2022
• Zhanbolot Aidaraliev, Imiyla Rysbaeva, Rakhat Atyrova, Akimbek Abdykalykov, Baktygul Bekbolot Kyzy, Chynara Zholdoshova, Nematilla Sopubekov, Altynbek Kuduev, Iurii Dubinin, Zhypargul Abdullaeva
• Citations: 1 (Details)

• Synthesis, Growth and Characterization of Benzophenone Added Sodium Acid Phthalate Crystal—A Potential Material for Nonlinear Optical Applications, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.1, 2022
• Anandaraj Louis, Jothi Lakshmanan
• Citations: 1 (Details)

• Experimental Alternative to the Determination of the Thermal Dependence of the Complex Modulus of Asphalt Mixes in Dry Tropical Areas, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.3, 2022
• Sidpouita Mathilde Koudougou, Guy Christian Tubreoumya, David Yemboini Kader Toguyeni, Tégawendé Justin Zaida
• Citations: 1 (Details)

• 2 GeV Electron Beam Irradiation Effects in Advanced Metallic Glasses, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.2, 2022
• Monica Sorescu, Fatiha Benmokhtar, Douglas Higinbotham, Marcy Stutzman
• Citations: 1 (Details)

• Recovery of Cassiterite and Topaz Minerals from an Old Metallurgical Dump, Eastern Desert of Egypt, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.1, 2022
• Suzan Sami Ibrahim, Khaled Ezzat Yassin, Tawfik Refaat Boulos, Ayman Aly Hagrass
• Citations: 1 (Details)

• Development of Magnesium Fertilizer Replacing Kieserite from Bio-Physico-Chemical Activated Dolomite, Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.1, 2022
• Didiek Hadjar Goenadi, Laksmita Prima Santi, Donny Nugroho Kalbuadi
• Citations: 1 (Details)

• Comparative Residual Stress Analysis in Welded Joints Using Both Experimental and Numerical Techniques, Journal of Minerals and Materials Characterization and Engineering, Vol.7 No.4, 2019
• Rajshekhar B. Aloor, Ramakrishna H V, Nagabhushana Musalammagri
• Citations: 1 (Details)

• Development of Laser Fusion Printing Machine for Ceramic Teeth Crown, Journal of Minerals and Materials Characterization and Engineering, Vol.6 No.4, 2018
• Risheng Zhang, Jialin Yang, Zhiqun Wu, Xiaohui Tang, Wei Yu, Shaoxing Ma, Fang Ji
• Citations: 1 (Details)

• Effect of Cu-Ni and Cu-Ni-Mn on the Microstructural and Mechanical Behaviour of As-Cast Non-Inoculated Hypereutectic Grey Iron, Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.2, 2020
• Seidu Ojo, Adama Sumaila, Onigbajumo Adetunji
• Citations: 1 (Details)

• Studies on the Effects of Bentonite (Nanoclay) on the Mechanical Properties of High-Density Polyethylene, Journal of Minerals and Materials Characterization and Engineering, Vol.7 No.6, 2019
• Jerome Anokwu
• Citations: 1 (Details)

• Small Angle Neutron Scattering Investigation of Compressed Bentonite Plugs, Journal of Minerals and Materials Characterization and Engineering, Vol.7 No.5, 2019
• Tomasz Blach, Heinz-Gerd Holl
• Citations: 1 (Details)

• Development of an In-Situ Composite Doped Coating for Corrosion Protection and Mechanical Properties Enhancements in Process Engineering, Journal of Minerals and Materials Characterization and Engineering, Vol.7 No.4, 2019
• Oluwasegun T. Joshua, Ojo S. I. Fayomi, Enejoh T. Omeje
• Citations: 1 (Details)