Lean Manufacturing; Lean Office; Value Stream Mapping; Kaizen; Kanban - Articles

Regional Geochemical Stream Sediment Survey for Gold Exploration in the Upper Lom Basin, Eastern Cameroon (Articles)

Benjamin Odey Omang, Che Vivian Bih, Albert Nih Fon, Victor Embui, Cheo Emmanuel Suh

International Journal of Geosciences Vol.5 No.9，August 27, 2014

DOI: 10.4236/ijg.2014.59087 6,175 Downloads 8,305 Views Citations
Associations of Jet Streams with Tornado Outbreaks in the North America (Articles)

Igor G. Zurbenko, Mingzeng Sun

Atmospheric and Climate Sciences Vol.5 No.3，July 27, 2015

DOI: 10.4236/acs.2015.53026 3,882 Downloads 5,298 Views Citations
Cameroonian Urban Floodwater Retaliations on Human Activity and Infrastructural Developments in Channel Flood Ways of Kumba (Articles)

Zephania N. Fogwe, Emilia Ngum Asue

Current Urban Studies Vol.4 No.1，March 28, 2016

DOI: 10.4236/cus.2016.41007 3,220 Downloads 4,990 Views Citations
An Assessment of an Urban Development-Flood-Impact Relationship in a Near Millionaire City of Cameroon (Bamenda) (Articles)

Zephania N. Fogwe

Journal of Geoscience and Environment Protection Vol.4 No.4，April 28, 2016

DOI: 10.4236/gep.2016.44017 2,141 Downloads 3,932 Views Citations
Spatial and Temporal Patterns of Variation in Environmental Quality of Water and Sediments of Streams in Mined and Unmined Areas with Emphasis on Mercury (Hg) and Arsenic (As) (Articles)

Stephen T. Annan, Peter O. Sanful, George Lartey-Young, Rebecca K. Yandam

Journal of Geoscience and Environment Protection Vol.6 No.9，September 13, 2018

DOI: 10.4236/gep.2018.69010 999 Downloads 2,010 Views Citations
The Inclusion of Children with Special Needs in Early Childhood: Challenges and Dilemmas of Kindergarten Teachers (Articles)

Aviva Dan

Creative Education Vol.10 No.5，May 30, 2019

DOI: 10.4236/ce.2019.105075 2,016 Downloads 8,242 Views Citations
Active Tectonic Strike-Slip Fault Development near Goran, Samba and Kathua Districts, Jammu and Kashmir (Articles)

Vikram Sharma, A. R. Chaudhri

Open Journal of Geology Vol.10 No.4，April 8, 2020

DOI: 10.4236/ojg.2020.104016 639 Downloads 1,756 Views Citations
Comparison of Three Macroinvertebrate Sampling Methods for Use in Assessment of Water Quality Changes in Flashy Urban Streams (Articles)

Roger Yeardley Jr., Scott Jacobs, Ken Fritz, William Thoeny

Journal of Environmental Protection Vol.11 No.8，August 5, 2020

DOI: 10.4236/jep.2020.118035 948 Downloads 2,807 Views Citations
This article belongs to the Special Issue on Environmental Monitoring and Assessment
Management of Meatal Stenosis in Port Harcourt: A Ten-Year Retrospective Study (Articles)

Gbobo Isesoma Francis, Abhulimen Victor

Open Journal of Urology Vol.12 No.8，August 19, 2022

DOI: 10.4236/oju.2022.128040 157 Downloads 987 Views Citations
Effective Task Scheduling for Embedded Systems Using Iterative Cluster Slack Optimization (Articles)

Jongdae Kim, Sungchul Lee, Hyunchul Shin

Circuits and Systems Vol.4 No.8，December 26, 2013

DOI: 10.4236/cs.2013.48063 4,109 Downloads 6,169 Views Citations
Temporal Comparisons of Apparent Electrical Conductivity: A Case Study on Clay and Loam Soils in Mississippi (Articles)

Reginald S. Fletcher

Agricultural Sciences Vol.13 No.8，August 16, 2022

DOI: 10.4236/as.2022.138058 177 Downloads 889 Views Citations
Access Control for Manufacturing Process in Networked Manufacturing Environment (Articles)

Ke Zhou, Min Lv, Gang Wang, Bingyin Ren

Journal of Service Science and Management Vol.2 No.2，June 17, 2009

DOI: 10.4236/jssm.2009.22014 5,443 Downloads 9,705 Views Citations
Converting Traditional Production Systems to Focused Cells as a Requirement of Global Manufacturing (Articles)

Ibrahim H. Garbie

Journal of Service Science and Management Vol.4 No.3，September 29, 2011

DOI: 10.4236/jssm.2011.43032 5,392 Downloads 10,062 Views Citations
Design Consideration for Additive Manufacturing: Fused Deposition Modelling (Articles)

Ala’aldin Alafaghani, Ala Qattawi, Muhammad Ali Ablat

Open Journal of Applied Sciences Vol.7 No.6，June 29, 2017

DOI: 10.4236/ojapps.2017.76024 3,929 Downloads 10,489 Views Citations
Accounting Benefits of ERP Systems across the Different Manufacturing Industries of SMEs (Articles)

Spyridon Goumas, Dimitris Charamis, Efthalia Tabouratzi

Theoretical Economics Letters Vol.8 No.6，April 23, 2018

DOI: 10.4236/tel.2018.86081 1,970 Downloads 5,138 Views Citations
This article belongs to the Special Issue on Computational Economics and Econometrics
Effect of 3D Printing Technology on 3C Product Manufacturing (Articles)

Guangqing Shang, Chunhua Sun

World Journal of Engineering and Technology Vol.8 No.4，November 9, 2020

DOI: 10.4236/wjet.2020.84051 911 Downloads 4,928 Views Citations
Proposal of an Innovative Business Model for Customized Production in Healthcare (Articles)

Golboo Pourabdollahian, Giacomo Copani

Modern Economy Vol.5 No.13，December 4, 2014

DOI: 10.4236/me.2014.513107 4,501 Downloads 6,141 Views Citations
A Literature Review and Taxonomy of Environmentally Responsible Manufacturing (Articles)

Sime Curkovic, Robert Sroufe

American Journal of Industrial and Business Management Vol.6 No.3，March 31, 2016

DOI: 10.4236/ajibm.2016.63030 3,237 Downloads 6,533 Views Citations
Empirical Analysis of Technology Innovation to Promote the International Competitiveness of China’s Manufacturing Industry (Articles)

Long Wei, Qi Luo

American Journal of Industrial and Business Management Vol.12 No.1，January 26, 2022

DOI: 10.4236/ajibm.2022.121003 385 Downloads 1,317 Views Citations
Reshoring Manufacturing Back to the United States (Articles)

Courtney L. Farrish, Sime Curkovic

Open Access Library Journal Vol.9 No.12，December 30, 2022

DOI: 10.4236/oalib.1109345 72 Downloads 767 Views Citations

<...789 ...>

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies