A. Riahi and J. H. Curvan, “Full 3D Finite Element Cosserat Formulation with Application in Layered Struc- tures,” Applied Mathematical Modeling, Vol. 33, No. 8, 2009, pp. 3450-3464. doi:10.1016/j.apm.2008.11.022

has been cited by the following article:

• TITLE: A 2D Finite Element Study on the Flow Pattern and Temperature Distribution for an Isothermal Spherical Furnace with the Aperture

  AUTHORS: Sudhakar Matle, Subbiah Sundar

  KEYWORDS: Calibration Furnace; Thermal Penetration; Rayleigh Number; Aspect Ratio

  JOURNAL NAME: Open Journal of Applied Sciences, Vol.2 No.4, December 26, 2012

  ABSTRACT: Calibration of radiation thermometers is one of the important research activities in the field of metrology. Many researchers in recent times have conducted numerical simulations on the calibration furnace to understand and overcome the experiment limitations. This paper presents a 2D numerical free convective study on the calibration furnace with the aperture using finite element method. The focused issues here are: aspect ratio effect on the flow pattern and temperature fields, heat transfer mechanism in the aperture zone as well as in hump regime. It is concluded that flow and temperature fields follow the same behavior in the hump regime as well as in the aperture zone. Also, it concluded that penetrative convection is more dominant for the enclosure of high aspect ratio.