C. H. Xue, M. M. Shi, H. Z. Chen and M. Wang, “Preparation and Application of Nanoscale Microemulsion as Binder for Fabric Inkjet Printing,” Colloids and Surfaces A: Physicochemical and Engineering Aspects, Vol. 287, No. 1-3, 2006, pp. 147-152. doi:10.1016/j.colsurfa.2006.03.046

has been cited by the following article:

• TITLE: Part 1: Synthesis and Evaluation of Novel Nano Scale Powdered Polyurethane Acrylate Binders

  AUTHORS: Mohamed M. El-Molla, Karima Haggag, Fatma N. El-Shall, N. O. Shaker

  KEYWORDS: Synthesis; Novel Powdered; An Aqueous; Polyurethane; Acrylate Binders

  JOURNAL NAME: Advances in Chemical Engineering and Science, Vol.2 No.2, April 27, 2012

  ABSTRACT: Some new an aqueous polyurethane acrylate (waterborne binder) based on polyethylene glycol with different M. wt. mixed with polyol were carried out. Seven different polyurethane acrylate co-polymers were prepared aiming at substituting the two hydroxyl groups of polyethylene glycol (6000, 12,000 and 20,000 g/mol) and two primary hydroxyl groups of polyol through their reaction with corresponding calculated amounts of either isophorone diisoyanate or toluene diisocyanate and caped the remaining isocyanate group with either hydroxy ethyl acrylate or hydroxy propyl methacrylate to get on the polyurethane acrylate polymers [PUA]. From DSC measurement the result of Tg of synthesized PUA are in range from -8.78℃ to 36.4℃. So they can classify as soft binders. The infrared spectra, rheological properties, viscosity measurement, the weight average molecular weight, of the synthesize binders were investigated.