TITLE:
Proposal for Energy Consumption Reduction between Connected Objects in a Network Running on MQTT Protocol
AUTHORS:
Saidou Haman, Djorwe Temoa, Eric Michel Deussom Djomadji, Kolyang
KEYWORDS:
Internet of Things, Heterogeneity, Message Queuing Telemetry Transport, Constrained Application Protocol, Application-Layer Semantic Gateway, Gateway
JOURNAL NAME:
Journal of Computer and Communications,
Vol.12 No.10,
October
29,
2024
ABSTRACT: The “Internet of Things” (IoT) refers to a set of intelligent “objects” that can communicate with each other directly or through a network. The IoT is the embodiment of the idea that everything can be connected anywhere and at any time. The concept can be applied to sectors such as e-health, e-government, automotive, geographic information systems, remote sensing, home networking, e-commerce and climate change mitigation. Unlike the Internet, the IoT has its own constraints, notably those linked to heterogeneity. This divergence is linked to different protocols, technologies and algorithms implemented in these connected objects for their interconnection. It should be noted that IoT devices can communicate with each other using different protocols and dedicated M2M (Machine to Machine) communication technologies. The aim of this work is to find solutions for optimising energy consumption during data exchanges between connected objects, with respect to certain constraints by using firstly this exchange for only Message Queuing Telemetry Transport (MQTT) and secondly the combination of the MQTT protocol and the Constrained Application Protocol (CoAP) protocol to check the quantity of the energy optimized. The MQTT protocol, for example, is one of the most widely used protocols for connected objects. Admittedly, this protocol consumes less energy, but in the situation of a very large number of users, the problem of saturation inevitably arises. In this article, we propose a solution of optimising energy consumption by combining the MQTT protocol with the CoAP protocol which can allow to use the standby mode contrary to the use of MQTT where the broker is always being turning. This solution has not yet been implemented but is being discussed. In this article, we’re going to use the joulemeter which is an application developed by Microsoft to measure and estimate the energy consumption of computers and applications. In our case, we take the example of the “Service Broker for network connections” of the Windows’s 10 Operating System, in my own computer to show the difference between the consumption of energy without the standby mode and with standby mode, because with the MQTT, the Broker’s MQTT is always on. Now, with the combination MQTT and CoAP, it is possible that we have standby mode and to compare these two cases in term of consumption of an energy. And to do it, we must use the joulemeter that we installed in our computer to simulate it. This is achieved by using the CoAP protocol combined with the MQTT protocol. The aim of our work is to reduce energy consumption in order to solve the problem of saturation of the MQTT by linking it to CoAP protocol by using Joulemeter mentioned above.