García-Valladares, O. and Velázquez, N. (2009) Numerical Simulation of Parabolic Trough Solar Collector: Improvement Using Counter Flow Concentric Circular Heat Exchangers. International Journal of Heat and Mass Transfer, 52, 597-609.
https://doi.org/10.1016/j.ijheatmasstransfer.2008.08.004

has been cited by the following article:

• TITLE: Performance of a Combined Energy System Consisting of Solar Collector, Biogas Dry Reforming and Solid Oxide Fuel Cell: An Indian Case Study

  AUTHORS: Akira Nishimura, Ryotaro Sato, Ryota Nakajima, Eric Hu

  KEYWORDS: Solar Collector, Temperature of Simulated Biogas, Case Study of Installation in India, H2 Production by Dry Reforming, Power Generated by SOFC

  JOURNAL NAME: Smart Grid and Renewable Energy, Vol.15 No.10, October 24, 2024

  ABSTRACT: An energy production system consisting of a solar collector, biogas dry reforming reactor and solid oxide fuel cell (SOFC) was assumed to be installed in Kolkata, India. This study aims to understand the impact of climate conditions on the performance of solar collectors with different lengths of parabolic trough solar collector (dx) and mass flow rate of heat transfer fluid (m). In addition, this study has evaluated the amount of H2 produced by biogas dry reforming (GH2), the amount of power generated by SOFC (PSOFC) and the maximum number of possible households (N) whose electricity demand could be met by the energy system proposed, considering the performance of solar collector with the different dx and m. As a result, the optimum dx was found to be 4 m. This study revealed that the temperature of heat transfer fluid (Tfb) decreased with the increase in m. Tfb in March, April and May was higher than that in other months, while Tfb from June to December was the lowest. GH2, PSOFC and N in March, April and May were higher than those in other months, irrespective of m. The optimum m was 0.030 kg/s.