Akçaozoglu, S., Atis, C. and Akçaooglu, K. (2010) An Investigation on the Use of Shredded Pet Waste Bottles as Aggregate in Lightweight Concrete. Waste Management, 30, 285-290.
https://doi.org/10.1016/j.wasman.2009.09.033

has been cited by the following article:

• TITLE: Modified Concrete Using Polyethylene Terephthalate Plastic Waste as a Partial Replacement for Coarse Aggregate

  AUTHORS: Dodo Kayentao, Moussa Tamboura, Antoine Padou Diarra, Mah Fatoumata Traore, Adama Coulibaly, Aboubacar Sidiki Toure, Mohamed L. O. Diawara, Kélétigui Daou

  KEYWORDS: PET Waste, Concrete, Dreux Gorisse Approach, Thermal Conductivity, Mechanical Properties of Modified Concrete

  JOURNAL NAME: Open Journal of Applied Sciences, Vol.13 No.6, June 28, 2023

  ABSTRACT: The present work evaluated the properties of modified concrete using polyethylene terephthalate (PET) bottle waste as a partial replacement for coarse aggregate. Modified concrete samples were designed using a water/cement (W/C) ratio of 0.50 and varying percentages of PET replacement (3%, 7%, 10%, and 15% by volume). Dreux Gorisse’s formulation approach was used to make the final products, and the mechanical properties of the samples were determined using Controlab presses. This modified concrete with PET chips has shown that with a 10% replacement of PET chips, the fresh density decreases by 3.56%, and the hardened state density decreases by 2.01%. The water absorption and thermal conductivity of the formulated concretes decreased. However, the results showed that the slump of these fresh concretes increased as the percentage of plastic aggregate replacement increased. Based on the results, incorporating PET aggregates into concrete contributes to good workability, and lightweight concrete structures, and provides some thermal comfort in concrete structures.