Wang, N., Zhao, Y. and Jiang, L. (2008) Low-Cost, Thermoresponsive Wettability of Surfaces: Poly(N-isopropylacrylamide)/Polystyrene Composite Films Prepared by Electrospinning. Macromolecular Rapid Communications, 29, 485-489.
https://doi.org/10.1002/marc.200700785

has been cited by the following article:

• TITLE: Profile Characterization and Temperature Effect on the Wettability of Microstructured Surfaces

  AUTHORS: Yuxuan Han, Yingwei Liu, Minami Kaneko, Fumio Uchikoba

  KEYWORDS: Wetting, Microstructured Surface, Temperature Effect, Contact Angle

  JOURNAL NAME: Journal of Surface Engineered Materials and Advanced Technology, Vol.8 No.4, September 7, 2018

  ABSTRACT: Wetting is one of the omnipresent phenomena governed via natural laws. Moreover, surface wettability at non-ambient temperature especially at high temperature (30°C to 90°C) is of great importance in many industrial processes. In this study, Si wafers with various structures were fabricated to investigate wettability at different temperatures. Three shapes with micro-pillar structured surfaces were designed and fabricated. Pillar-structured surfaces were fabricated by photolithography and ICP etching. The temperature-dependent wettability of single-phase regime droplets was characterized using contact angle measurements. The wetting behavior of a water droplet was observed.