Li, W., Fan, L., Zhao, Y., He, X., Xu, D. and Wu, B. (2012) High-Step-Up and High-Efficiency Fuel-Cell Power-Generation System With Active-Clamp Flyback-Forward Converter. IEEE Transactions on Industrial Electronics, 59, 599-610.
http://doi.org/10.1109/TIE.2011.2130499

has been cited by the following article:

• TITLE: Analysis and Design of Single Switch Hybrid Step-Up Converter

  AUTHORS: Ravivarman Shanmugasundaram, Jeyabharath Rajaiah, Veena Parasunath

  KEYWORDS: DC-DC Power Conversion, Switched-Inductor, Step-Up Converter, Voltage Multiplier

  JOURNAL NAME: Circuits and Systems, Vol.7 No.4, April 19, 2016

  ABSTRACT: A Single Switch Hybrid Step-up Converter with high voltage gain, which is suitable for renewable energy system, is proposed in this paper. The proposed converter consists of one switched diode-inductor cell and a capacitor. While switching, both are charged in parallel from the input source and discharged in series to the output. In order to obtain extra voltage gain at lower duty cycle, the voltage multiplier cell is integrated with the proposed converter. The main advantages of the converter are high voltage gain, reduced voltage stress, simple structure and low output voltage ripples. The operating principle and steady state theoretical analysis are presented. A 250 W prototype converter is implemented with 12 V input and 120 V output to verify the design and analysis of this converter and it has an efficiency of over 90% in all operations.