C. Fellner, M. Behr, F. Fellner, P. Held, G. Handel, S. Feuerbach, (1997). Artifacts in MR imaging of the tem-poromandibular joint caused by dental alloys: A phantom model study at T1.5. Rofo, 166,421-8.

has been cited by the following article:

• TITLE: Implant-related MRI artifacts of determined interbody test spacers: artifact calculations due to implant parameters in a porcine spine model

  AUTHORS: Thorsten Ernstberger

  KEYWORDS: Magnetic Resonance Imaging; Geometrical Test Implants; Susceptibility Effect; Titanium Interbody Spacer

  JOURNAL NAME: Health, Vol.1 No.3, December 1, 2009

  ABSTRACT: Aim: Intervertebral spacers for anterior spine fusion are made of different materials, which can affect the post-fusion MRI scans. Suscep- tibility artifacts specially for implants made of titanium alloys can decrease the image quality. This study focused on the influence of deter-mined implant parameters like shape and implant volume in MRI artifacting independent from se-lected MRI-sequences. Methods: In this study the post-implantation MRI scans of determined cuboids and cylinders were evaluated. All in-terbody test implants were made of titanium alloys. MRI scans were carried out by using T1 TSE sequences. The total artifact volume (TAV) of all examined implants were calculated for sta-tistical t-test correlation and implant volume (IV)/TAV-relation. Results: Considering all ex-amined test implants with an increasing implant size the TAV became significant larger (p