SCIRP Mobile Website

Why Us? >>

  • - Open Access
  • - Peer-reviewed
  • - Rapid publication
  • - Lifetime hosting
  • - Free indexing service
  • - Free promotion service
  • - More citations
  • - Search engine friendly

Free SCIRP Newsletters>>

Add your e-mail address to receive free newsletters from SCIRP.


Contact Us >>

WhatsApp  +86 18163351462(WhatsApp)
Paper Publishing WeChat
Book Publishing WeChat

Article citations


B. F. Zuo, D. Black and D. Crocker, “Fuel Atomization and Drop Breakup Models for Advanced Combustion CFD Codes,” 38th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, Indianapolis, 7-10 July 2002, AIAA No. 4175.

has been cited by the following article:

  • TITLE: Simulation and Experimental Study on the Atomization Character of the Pressure-Swirl Nozzle

    AUTHORS: Jianbo Zhao, Lijun Yang

    KEYWORDS: Atomization; Simulation; PDPA

    JOURNAL NAME: Open Journal of Fluid Dynamics, Vol.2 No.4A, January 2, 2013

    ABSTRACT: In this paper the atomization character of the pressure-swirl injector was measured by using the Phase Doppler Particle Analyzer (PDPA) in the section of 150 mm below the outlet of the orifice. The orifice diameter of the pressure-swirl injector is 0.62 mm. The atomization character includes the spray angle, the water flow rate, the Sauter mean diameter (SMD), the velocity of the particles and their distribution in the radial and the axial directions under the pressure from 1 MPa to 4.5 MPa. After that the atomization character of the pressure-swirl injector was simulated in the DPM panel. The same atomization character of the injector was calculated and compared with the experimental data. The simulation was corrected by using the experimental data which can make it accurately and the model can be used to predict and calculate the atomization character of different injectors.