Ogino, Y., Hirata, Y. and Murphy, A.B. (2016) Numerical Simulation of GMAW Process Using Ar and an Ar-CO2 Gas Mixture. Welding in the World, 60, 345-353.
https://doi.org/10.1007/s40194-015-0287-3

has been cited by the following article:

• TITLE: Numerical Simulation of Molten Metal Droplet Behavior in Gas Metal Arc Welding by Three-Dimensional Incompressible Smoothed Particle Hydrodynamics Method

  AUTHORS: Hisaya Komen, Masaya Shigeta, Manabu Tanaka

  KEYWORDS: SPH Method, Gas Metal Arc Welding, Molten Metal Droplet Transfer, Simulation

  JOURNAL NAME: Journal of Flow Control, Measurement & Visualization, Vol.6 No.2, April 12, 2018

  ABSTRACT: The numerical model was developed using a SPH (Smoothed Particle Hydrodynamics) method and the projected transfer phenomena during a GMA (Gas Metal Arc) welding were simulated by the model to clarify mechanisms of the phenomena. As a result, the droplet transfer mode obtained from this calculation was regarded as a projected transfer mode in which the liquid column grew about 1 mm and a droplet grew up until its diameter became large the same as a wire diameter,after that it was detached from the tip of the column. In addition, 10 droplets were formed for 0.1 s through these growth and detachment processes at the tip of a wire. To compare with the numerical results, actual GMA welding was carried out and molten metal droplet transfers were taken by high speed camera. The diameter of a wire, the length of a liquid column, the velocity of a droplet right before it reached a weld pool obtained by simulation showed good agreement with experiment.