Feng, Q., Song, L., Zeng, Y., Fang, Y., Meng, L., Liu, J. and Wang, H. (2015) Evolution of FCC/BCC Interface and Its Effect on the Strengthening of Severe Drawn Cu-3 wt.% Cr. J. Alloys Compd., 640, 45-50. https://doi.org/10.1016/j.jallcom.2015.03.226

has been cited by the following article:

• TITLE: Evolution of Microstructure in a Cu-Cr in situ Composite Produced by Thermo-Mechanical Processing

  AUTHORS: Keming Liu, Deping Lu, Kai Fu, Peilan Luo, Zhikai Huang, Wei Guo, Jiuming Yu, Jin Zou, Qiang Hu

  KEYWORDS: Cu-Cr, in situ Composite, Evolution, Microstructure, Thermo-Mechanical Processing

  JOURNAL NAME: Journal of Materials Science and Chemical Engineering, Vol.5 No.7, July 7, 2017

  ABSTRACT: This paper studied the microstructure evolution of a deformation-processed Cu-7Cr in situ composite prepared by thermo-mechanical processing. The longitudinal and transverse sectional microstructures were analyzed using an optical microscope and a scanning electronic microscope. In the longitudinal section, the initially randomly distributed Cr dendrites in the as-cast Cu-7Cr alloy were transformed into the fibres aligned parallel to the drawing axis; the Cr dendrites experienced breaking, flattening and rotating, lapping and merging, and homogenizing and refinement during thermo-mechanical processing. In the transverse section, the initially randomly distributed Cr dendrites in the as-cast Cu-7Cr alloy were changed into the curvy ribbon like fibres; the Cr dendrites underwent breaking, flattening and rotating, folding and twisting, and irregularizing and refinement during thermo-mechanical processing.