Cho, J.M., Kwak, S.-W., Aqoma, H., Kim, J.W., Shin, W.S., Moon, S.-J., Jang, S.-Y. and Jo, J. (2014) Effects of Ultraviolet-Ozone Treatment on Organic-Stabilized ZnO Nanoparticle-Based Electron Transporting Layers in Inverted Polymer Solar Cells. Organic Electronics, 15, 1942-1950.
http://dx.doi.org/10.1016/j.orgel.2014.05.016

has been cited by the following article:

• TITLE: An Approach to Equivalent Circuit Modelling of Inverted Organic Solar Cells

  AUTHORS: Nazmul Hossain, Sayantan Das, Terry L. Alford

  KEYWORDS: Inverted Organic Solar Cell, Equivalent Circuit, Fill-Factor, P3HT/PCBM, ETL, Yttrium-Doped ZnO

  JOURNAL NAME: Circuits and Systems, Vol.7 No.8, June 8, 2016

  ABSTRACT: A low temperature sol-gel process was used to fabricate zinc-oxide and yttrium-doped zinc oxide layers. These zinc-oxide and yttrium-doped ZnO films were used as electron transport layers in conjunction with P3HT and PC16BM type solar cells. It was demonstrated that annealing and doping of electron transport layer influenced the overall organic solar cells performance. Anneals of ~ 150?C provided the highest device performance. Compared to the undoped zinc oxide, the device with yttrium doped zinc oxide layers showed improved efficiency by about 30%. Furthermore anequivalent circuit was proposed to understand the connection between the electrical and opticalcharacteristics of the device. Comparisons between the simulated and experimental current-voltage(I-V) curves displayed only a 1.2% variation between the curves. Clearly, our experimental andsimulated studies provide new insight on the equivalent circuit models for inverted organic solar cells and further improvement on photovoltaic efficiency.