Wheeler, N.V., Heidt, A.M., Baddela, N.K., Fokoua, E.N., Hayes, J.R., Sandoghchi, S.R., Poletti, F., Petrovich, M.N. and Richardson, D.J. (2014) Low-Loss and Low-Bend-Sensitivity-Mid-Infrared Guidance in a Hollow-Core Photonic-Bandgap Fiber. Optics Letters, 39, 295-298.
http://dx.doi.org/10.1364/OL.39.000295

has been cited by the following article:

• TITLE: Design of Environmental Biosensor Based on Photonic Crystal Fiber with Bends Using Finite Element Method

  AUTHORS: Shyqyri Haxha, Ahmed Teyeb, Fathi Abdel Malek, Emmanuel Kofi Akowuah, Iyad Dayoub

  KEYWORDS: Biosensors, Photonic Crystal Fibres Sensor, Nanosensor, Finite Element Method

  JOURNAL NAME: Optics and Photonics Journal, Vol.5 No.3, March 20, 2015

  ABSTRACT: In this paper, a biosensor based on photonic crystal fiber (PCF) is proposed and designed using Full-Vectorial Finite Element Method (FVFEM). The proposed PCF sensor consists of three concentric circles surrounding the core. The key optical sensor characteristics such as sensitivity, the field profiles and real part of the refractive index of the proposed PCF structure are investigated by employing the FVFEM. The proposed sensor can be deployed for environmental sensing when the PCF active region is filled with either analytes such as liquids or gas. By careful selection of the design parameters such as the radius of the sensing circle, the diameter of air holes in the core region and hole to hole spacing, Λ, the sensitivity analytes is determined. Our simulation results show that, the electric field distribution is primary localized in the third concentric circle with a radius of 16 μm. Effects of PCF bending on the sensitivity is also studied and reported.