Anish Upadhyayaa and Guneet Sethi, “Effect of heating mode on the densification and microstructural homogenization response of premixed bronze,” Scripta Materialia, Vol. 56, No. 6, March 2007, PP. 469-472.

has been cited by the following article:

• TITLE: Consolidation of MA W-Ni-Fe Alloyed Powder by Microwave-Assisted Sintering

  AUTHORS: Wensheng Liu, Yunzhu Ma, Qingshan Cai

  KEYWORDS: W-Ni-Fe Alloy, Microwave Sintering, Consolidation

  JOURNAL NAME: Materials Sciences and Applications, Vol.2 No.6, June 24, 2011

  ABSTRACT: MA W-Ni-Fe alloyed powder compact was sintered by microwave technology, and the influence of microwave sintering on consolidation of W-Ni-Fe alloy was studied. The fracture morphology and microstructure of alloys were measured by SEM and metallurgical microscope. The experimental results showed that microwave sintering promoted the densification of MA W-Ni-Fe alloyed powder quickly with the higher heating rate. The density of the sintered samples increased with the increase of sintering temperature, and significant densification shrinkage occured at 1300 ~ 1400°C. The tungsten grain grew rapidly at 1450°C. When the alloy was microwave sintered at 1550°C, the inner structure of alloy is more homogeneous, the average W grain size is about 15 μm, and the relative density of sintered specimen is 99%.