Ayres, H.M., Freitas, W., De Almeida, M.C. and Da Silva, L.C.P. (2010) Method for Determining the Maximum Allowable Penetration Level of Distributed Generation without Steady-State Voltage Violations. IET Generation, Transmission Distribution, 4, 495-508.
http://dx.doi.org/10.1049/iet-gtd.2009.0317

has been cited by the following article:

• TITLE: Identification of Preferable Distributed Generators Locations for Congestion Relief in Multi-Bus Power Network

  AUTHORS: Barnali K. Sarkar, Abhijit Chakrabarti, Abhinandan De

  KEYWORDS: Distributed Generators, Congestion Index, Contribution Factor of DG, Voltage Sensitivity, Zone Classification

  JOURNAL NAME: Energy and Power Engineering, Vol.6 No.7, July 25, 2014

  ABSTRACT: Installation of Distributed Generator (DG) is a well accepted method to improve power system operation from the point of reducing congestion and improving voltage profiles. For best results, Distributed Generators should be placed at strategic locations to exploit maximum benefits out of them. The (N-1) contingency criterion has been taken into account in this work. Most congested lines of the grids are ranked by congestion Index and considered to study the impact of DG penetration on congestion. The present paper proposes contribution factors of Distributed Generators for the placement of DG to keep the line flow within the capacity of each transmission line of the network. The results obtained from IEEE 30-bus test system indicate that the proposed methods are capable of identifying desirable DG location and its maximum allowable size. The influence of DG on bus voltage profile has also been demonstrated in this paper.