Paesano Jr., A., Zanatta, S.C., de Medeiros, S.N., Cótica, L.F. and da Cunha, J.B. (2005) Mechanosynthesis of YIG and GdIG: A Structural and Mössbauer Study. Hyperfine Interactions, 161, 211-220.
http://dx.doi.org/10.1007/s10751-005-9193-1

has been cited by the following article:

• TITLE: Mechano-Synthesized Orthoferrite Starting from Wüstite Assisted by SPS

  AUTHORS: Claudia Alicia Cortés-Escobedo, Félix Sánchez-De Jesus, Ana María Bolarín-Miró, Sophie Nowak, Elizabeth Piazzini Juárez-Camacho, Sebastián Díaz de la Torre, Raúl Valenzuela

  KEYWORDS: Wüstite; Orthoferrite; Mechano-Synthesis; SPS; Magnetic Properties

  JOURNAL NAME: Advances in Materials Physics and Chemistry, Vol.4 No.3, March 19, 2014

  ABSTRACT: Stoichiometric mixtures of FeO and Y2O3 were milled and heat treated to obtain yttrium iron garnet, Y3Fe5O12. Two types of heating systems were used: one, a spark plasma sintering machine and the second, an electrical oven. The magnetic properties of the resulting specimens have been analyzed and discussed as a function of the grain size and the particles’ morphology. The partial formation of garnet and orthoferrite phases was revealed on the obtained powder through microstructural analyses after 9 h of ball milling. The milled powders were transformed into the orthoferrite phase after the SPS-treatment at 700°C and 900°C. Magnetic-saturation studies revealed magnetic responses up to 12.7 emu/g for specimens SPS-treated at 700°C, whereas 2.1 emu/g for samples SPS-treated at 900°C. Conventionally treated specimens at 700°C developed 0.36 emu/g of magnetization, while 0.93 emu/g was registered for those treated at 900°C.