Xue, D., Chen, Y., Ling, G., Liu, K., Chen, C. and Zhang, G. (2015) Preparation of Aluminide Coatings on the Inner Surface of Tubes by Heat Treatment of Al Coatings Electrodeposited from an Ionic Liquid. Fusion Engineering and Design, 101, 128-133.
https://doi.org/10.1016/j.fusengdes.2015.10.013

has been cited by the following article:

• TITLE: Extended Anode Effect for Tube Inner Coating of Non-Conductive Ceramics by Pulsed Coaxial Magnetron Plasma

  AUTHORS: Musab Timan Idriss Gasab, Hiroyuki Sugawara, Kei Sakata, Hiroshi Fujiyama

  KEYWORDS: Double-Ended Coaxial Magnetron Pulsed Plasma, Tube Inner Coating, Extended Anode Effect, Fine Ceramic Films, Titanium Nitride Films, Titanium Oxide Films

  JOURNAL NAME: Materials Sciences and Applications, Vol.9 No.1, January 5, 2018

  ABSTRACT: For uniform tube inner coating of non-conductive thin films, the double-ended coaxial magnetron pulsed plasma (DCMPP) method was investigated. In this study, coating of TiN and TiO2 was performed. It was clearly shown that the extended anode effect was strongly influenced by the electric resistance of the coated thin films on the inner surface of an insulator tube. Additionally, high frequency (100 kHz) was better for relatively high plasma density. On the other hand, in the case of titanium oxide deposition, negative ion productions drastically decrease the deposition rate and the shifting velocity of plasma main position for coated TiO2 films.