Yan, R., Liang, D.T., Tsen, L., Wong, Y.P. and Lee, Y.K. (2004) Bench-Scale Experimental Evaluation of Carbon Performance on Mercury Vapour Adsorption. Fuel, 83, 2401-2409.
https://doi.org/10.1016/j.fuel.2004.06.031

has been cited by the following article:

• TITLE: Optimization of Fixed-Bed Design for Natural Gas Mercury Removal by Sulfur Doped into Porous Activated Carbon

  AUTHORS: Delphine Mukamurara, Xuewu Liu, Shuhua Chen, Shangshang Ren, Jean Claude Munyemana, Jiupeng Zou

  KEYWORDS: Porous activated Carbon, Mercury Adsorption Mechanism, Natural Gas, Elemental Sulfur Impregnation

  JOURNAL NAME: Journal of Materials Science and Chemical Engineering, Vol.7 No.2, February 26, 2019

  ABSTRACT: The present work reports the synthesis and application of sulfur doped into porous activated carbon for removing elemental mercury from natural gas using a bench-scale fixed-bed reactor. A series of experiments were carried out to investigate the optimization of Hg0 capture. Furthermore, our experimental results about optimum conditions to remove Hg0 were 1:10 of sulfur to activated carbon impregnation ratio, 350°C of impregnation temperature, and 3 hours of impregnation time. This research showed that the prepared adsorbents were capable to remove remarkable amount of Hg0 (23.615 mg/g) at high adsorption efficiency. This study may serve as reference on natural gas power plants for the removal of Hg0 using the same conditions.