SCIRP Mobile Website
Paper Submission

Why Us? >>

  • - Open Access
  • - Peer-reviewed
  • - Rapid publication
  • - Lifetime hosting
  • - Free indexing service
  • - Free promotion service
  • - More citations
  • - Search engine friendly

Free SCIRP Newsletters>>

Add your e-mail address to receive free newsletters from SCIRP.


Contact Us >>

WhatsApp  +86 18163351462(WhatsApp)
Paper Publishing WeChat
Book Publishing WeChat

Article citations


Abouzeid, O. and Syakur, A. (2018) Design of Grounding System at 150 kV Krapyak Substation by Grounding System Software. IJESC, 17180, 17178-17185. %20System%20at%20150%20kV%20Krapyak%20Substation%20by%20Grounding%20 System%20Software.pdf

has been cited by the following article:

  • TITLE: Grounding Systems for Power Supply Facilities

    AUTHORS: Vladimir Anatolevich Konusarov, Evgeniy Alekseevich Shutov, Tatyana Evgenievna Turukina

    KEYWORDS: Grounding Device, Current-Using Equipment, Short-Circuit Fault, Single Phase-to-Ground Fault, Main Step Down Substation (MSDS), TN-C, TN-S, TN-C-S, TT, IT, Indirect Contact, Step Potential, FEM, IEEE

    JOURNAL NAME: Energy and Power Engineering, Vol.11 No.1, January 23, 2019

    ABSTRACT: The goal of this work is creation of optimal grounding model at the substation 10/0.4 kV of the urban power distribution network. The electric current can pose a major threat to the man’s life and health. In addition to pose a threat for health, the rise of the short circuit, as a consequence of insulation faults, poses a threat to retirement of electric systems and fire risks. The reliable grounding system design has significant implications for protection of human being as well as for electrical facility protection. The set objective was performed on the base of analytical and software-based methods. Analytical method gives a qualitative indication at each step in analysis. It also allows evaluating the values effect on the result, but the method is not susceptible of tolerable accuracy, that is why analytical method serves as initial approximation in differentiating. Specified estimation can be performed in such software package as MATLAB or ETAP. Software-based estimation is based on the finite element method (FEM), the main advantage of which is the ability to create different forms of grounding and allows obtaining distribution graphs of the step potential on the earth’s surface and touch potential. The calculation results in comparison of analytical and software-based methods taking into account the grounding optimization. There are conclusions on the most effective ground network.