Fenz, D.M. and Constantinou, M.C. (2008) Development, Implementation and Verification of Dynamic Analysis Models for Multi-Spherical Sliding Bearings. Report No. MCEER-08-0018, Multidisciplinary Center for Earthquake Engineering Research, Buffalo, NY.
http://mceer.buffalo.edu/publications/catalog/reports/Development-Implementa-tion-and-Verification-of-Dynamic-Analysis-Models-for-Multi-Spherical-Sliding-Bearings-MCEER-08-0018.html

has been cited by the following article:

• TITLE: Bilinear Model Proposal for Seismic Analysis Using Triple Friction Pendulum (TFP) Bearings

  AUTHORS: Iván Delgado, Roberto Aguiar, Pablo Caiza

  KEYWORDS: Triple Friction Pendulum Bearings

  JOURNAL NAME: Open Journal of Civil Engineering, Vol.7 No.1, February 3, 2017

  ABSTRACT: An analytical model is presented for seismic analysis of triple friction pendulum bearings and validated using 81 bearing tests, each subjected to three cycles, with a duration of 12 seconds and using 250, 200 and 100 tons vertical loads. The main objective is to develop formulas for bilinear behavior using maximum, average and minimum friction coefficients to check which is the closest to the real behavior in the laboratory tests and comparatives curves plotting to observe the standard derivation. Parameters such as friction coefficients, effective stiffness, damping factor and vibration periods are analyzed to understand the structural behavior of the TPF bearings.