Design and Application of Optimization Software for Substation Operation Mode Based on EMS ()
Abstract
This paper proposes a kind of optimization software for
substation operation mode, which can not only read data on-line from EMS, but also calculate total loss of substations in
parallel operation, split operation or individual operation mode. It can also
select the most optimized way and feed the conclusion back to EMS
to make substations operate in the most optimized way. The software is suitable
for optimization of substation in rural power grid.
Share and Cite:
N. Gao, J. Huang and H. Li, "Design and Application of Optimization Software for Substation Operation Mode Based on EMS,"
Energy and Power Engineering, Vol. 5 No. 4B, 2013, pp. 689-692. doi:
10.4236/epe.2013.54B133.
Conflicts of Interest
The authors declare no conflicts of interest.
References
|
[1]
|
X. Q. Wang, “Discussion on the Methods and Measures of Reducing Rural Power Grid Loss,” China Electric Power (Technology Edition), No. 10, 2012.
|
|
[2]
|
M. Zhao and H. W. Tang, “Research of Reasonable Distribution Modes of Rural Power Grids,” Journal of China Agricultural University, No. 4, 2012.
|
|
[3]
|
F. H. Li, T. M. Chen, F. S. Zheng, L. Z. Zhang and D. Q. Zhu, “Electromechanics,” 2nd Edition, Beijing: Science Press, 1991, pp. 12-39 and 74-76.
|
|
[4]
|
J. Liu, “Discussion and Analysis of Transformer Loss Calculation,” Equipment Manufacturing Technology, No. 11, 2012.
|
|
[5]
|
J. S. Hu, “Transformer Economic Operation,” Beijing: China Electric Power Press, 1999, pp. 19-44.
|
|
[6]
|
J. L. Xu, “Method to Reduce Power Transformer Loss,” Electro-technics Electric, No. 3, 2012.
|