Comprehensive Modulation and Classification of Faults and Analysis Their Effect in DC Side of Photovoltaic System

Abstract

The first step in automatic supervision, condition monitoring and fault detection of photovoltaic system is recognition, exploration and classification of all possible faults that maybe happen in the system. This paper aims to perceive, classified, simulate and discus all electrical faults in DC side of photovoltaic system, regarding electrical voltage and current inspections. For that, simplified hybrid model of photovoltaic panel in MATLAB environment is used. Investigation and classification of each type of faults is down and the effects of the faults are illustrated in this paper. Flash test are applied to improved electrical model. Current-Voltage curves signature are interpreted and investigated in simulation environment.

Share and Cite:

M. Davarifar, A. Rabhi and A. Hajjaji, "Comprehensive Modulation and Classification of Faults and Analysis Their Effect in DC Side of Photovoltaic System," Energy and Power Engineering, Vol. 5 No. 4B, 2013, pp. 230-236. doi: 10.4236/epe.2013.54B045.

Conflicts of Interest

The authors declare no conflicts of interest.

References

[1] C. J. Huang, L. Y. Kang, Y. C. Jen, and C. S. Jen, “Design and Implementation of a Photovoltaic High-Intensity-Discharge Street Lighting System,” Power Electronics, IEEE Transactions, Vol. 26, No. 12, 2011, pp. 3464-3471. doi:10.1109/TPEL.2011.2116806
[2] M. Kolhe, “Techno-Economic Optimum Sizing of a Stand-Alone Solar Photovoltaic System,” Energy Conversion, IEEE Transactions on, Vol. 24, No. 2, 2009, pp. 511-519. doi:10.1109/TEC.2008.2001455
[3] N. Groom, “Analysis: Oil companies go solar to tap hard-to-get supplies,” Ed: USA Edition; Reuters, 2011.
[4] D. Solyali and M. A. Redfern, “Why Should Cyprus Exploit the Solar Power to Match its Peak Demand?” Universities' Power Engineering Conference (UPEC), Proceedings of 2011 46th International, 2011, pp. 1-6.
[5] P. Ducange, M. Fazzolari, B. Lazzerini and F. Marcelloni, “An Intelligent System for Detecting Faults in Photovoltaic Fields,” In Intelligent Systems Design and Applications (ISDA), 2011 11th International Conference on, 2011, pp. 1341-1346.
[6] S. Shojaee, M. Davarifar, M. H. Varahram and A. Davari, “Implementation of Remote Meter Reading Via Power Line,” In RCEE 2006,Gonabad Azad University, Iran, 2006.
[7] M. Davarifar, Z. Daneshi-Far and H. Fayyaz, “Implementation of Automate Remote Meter Reading (AMR) via BPL in Kish Island,” In International Power System Conference (PSC), 2009, Tehran, Iran., 2009.
[8] Y. Zhao, B. Lehman, J. F. DePalma, J. Mosesian and R. Lyons, “Fault Evolution in Photovoltaic Array during night-to-day Transition,” In Control and Modeling for Power Electronics (COMPEL), 2010 IEEE 12th Workshop on, 2010, pp. 1-6.
[9] T. Takashima, J. Yamaguchi and M. Ishida, “Disconnection Detection using Earth Capacitance Measurement in Photovoltaic Module String,” Progress in Photovoltaics: Research and Applications, Vol. 16, No. 8, 2008, pp. 669-677. doi:10.1002/pip.860
[10] S. Buddha, H. Braun, V. Krishnan, C. Tepedelenlioglu, A. Spanias, T. Yeider, et al., “Signal processing for photovoltaic applications,” in Emerging Signal Processing Applications (ESPA), 2012 IEEE International Conference on, 2012, pp. 115-118.
[11] Z. Ye, Y. Ling, B. Lehman, J. de Palma, J. Mosesian and R. Lyons, “Decision tree-based fault detection and classification in solar photovoltaic arrays,” in Applied Power Electronics Conference and Exposition (APEC), 2012 Twenty-Seventh Annual IEEE, 2012, pp. 93-99.
[12] M. Davarifar, A. Rabhi and A.Hajjaji, “Circuit Model Of PEM Fuel Cell For Energy Conversion Uses Renewable Energy System In Matlab,” in The International Renewable Energy Congress (IREC), Hammamet, Tunisia, December 2011.
[13] M. Davarifar, A. Rabhi and A. E. Hajjaji, "Modeling of Solar Photovoltaic Panels in Matlab/Simscape Environment," in International Conference on Renewable Energy: Generation and Applications” ICREGA’12, Al Ain, United Arab Emirates, March 2012.
[14] M. Davarifar, A. Rabhi, A. E. Hajjaji and J. Bosche, “Real Time Modeling of Triple layers Amorphous Photovoltaic Panels,” in 2nd International Conference on Systems and Control (ICSC12),Marrakesh, Morocco , April 2012.
[15] M. Davarifar, A. Rabhi, A. Hajjaji, J. Bosche and X. Pierre, “Improved Real Time Amorphous PV Model for Fault Diagnostic Usage,” in Sustainability in Energy and Buildings, Vol. 22, A. Hakansson, M. H?jer, R. J. Howlett, and L. C. Jain, Eds., ed: Springer Berlin Heidelberg, 2013, pp. 179-188.
[16] T. Takashima, J. Yamaguchi, K. Otani, T. Oozeki, K. Kato, and M. Ishida, “Experimental studies of fault location in PV module strings,” Solar Energy Materials and Solar Cells, Vol. 93, No. 6-7, 2009, pp. 1079-1082. doi:org/10.1016/j.solmat.2008.11.060
[17] C. Strobl and P. Meckler, “Arc Faults in Photovoltaic Systems,” in Electrical Contacts (HOLM), 2010 Proceedings of the 56th IEEE Holm Conference on, 2010, pp. 1-7.
[18] F. Ancuta and C. Cepisca, “Fault analysis possibilities for PV panels,” in Energetics (IYCE), Proceedings of the 2011 3rd International Youth Conference on, 2011, pp. 1-5.
[19] A. D. S. Wendlandt, T. Buseth, S. Krauter, P. Grunow, “Hot Spot Risk Analysis on Silicon Cell Modules,” in 25th European Photovoltaic Solar Energy Conference and Exhibition / 5th World Conference on Photovoltaic Energy Conversio, Valencia, Spain, 2010, pp. 4002-4006.
[20] H. Haeberlin and M. Real, “Arc Detector for Remote Detection of Dangerous Arcs on the DC Side of PV Plants,” in 22nd EU PV Conf., Milano, Italy, 2007.
[21] P. Mastny, L. Radil and Z. Mastna, “Possibilities of PV Panels Defects Identification and Determination of its Effect on the Economy of Photovoltaic Power Plants Operation,” in Communication and Management in Technological Innovation and Academic Globalization, 2011, pp. 233-238.

Copyright © 2024 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.