[1]
|
J. Schalamon, T. Petnehazy, H. Ainoedhofer, E. B. Zwick, G. Singer and M. E. Hoellwarth, “Pin Tract Infection with External Fixation of Pediatric Fractures,” Journal of Pediatric Surgery, Vol. 42, No. 9, 2007, pp. 1584-1587.
http://dx.doi.org/10.1016/j.jpedsurg.2007.04.022
|
[2]
|
T. Miclau, A. Remiger, S. Tepic and R. Lindsey, “Mechanical Comparison of the Dynamic Compression Plate, Limited Contact-Dynamic Compression Plate, and Point Contact Fixator,” Journal of Orthopaedic Trauma, Vol. 9, No. 1, 1995, pp. 17-22.
http://dx.doi.org/10.1097/00005131-199502000-00003
|
[3]
|
J. Mahan, D. Seligson, S. L. Henry, P. Hynes and J. Dobbins, “Factors in Pin Tract Infections,” Orthopedics, Vol. 14, No. 3, 1991, pp. 305-308.
|
[4]
|
G. Pizá, V. L. Caja, M. A. Gonzalez-Viejo and A. Navarro, “Hydroxyapatite-Coated External-Fixation Pins: The Effect on Pin Loosening and Pin-Track Infection in Leg Lengthening for Short Stature,” Journal of Bone & Joint Surgery, Vol. 86B, No. 6, 2004, pp. 892-897.
http://dx.doi.org/10.1302/0301-620X.86B6.13875
|
[5]
|
H. G. Ahlborg and P. O. Josefsson, “Pin-Tract Complications in External Fixation of Fractures of Distal Radius,” Acta Orthopaedica Scandinavica, Vol. 70, No. 2, 1999, pp. 116-118.
http://dx.doi.org/10.3109/17453679909011246
|
[6]
|
A. Moroni, L. Orienti, S. Stea and M. Visentin, “Improvement of the Bone Pin Interface with Hydroxyapatite Coating: An in Vivo Long Term Experimental Study,” Journal of Orthopaedic Trauma, Vol. 10, No. 2, 1996, pp. 236-242.
http://dx.doi.org/10.1097/00005131-199605000-00003
|
[7]
|
Y. C. Tsui, C. Doyle and T. W. Clyne, “Plasma Sprayed Hydroxyapatite Coatings on Titanium Substrates. Part 1: Mechanical Properties and Residual Stress Levels,” Biomaterials, Vol. 19, No. 22, 1998, pp. 2015-2029.
http://dx.doi.org/10.1016/S0142-9612(98)00103-3
|
[8]
|
C. C. Berndt, G. N. Haddad, A. J. D. Farmer and K. A. Gross, “Thermal Spraying for Bioceramic Applications,” Materials Science Forum, Vol. 14, No. 3, 1990, pp. 161-173.
|
[9]
|
A. Moroni, F. Vannini, M. Mosca and S. Giannini, “State of the Art Review: Techniques to Avoid Pin Loosening and Infection in External Fixation,” Journal of Orthopaedic Trauma, Vol. 16, No. 3, 2002, pp. 189-195.
http://dx.doi.org/10.1097/00005131-200203000-00009
|
[10]
|
R. Placzek, M. Ruffer, G. Deuretzbacher, E. Heijens and A. L. Meiss, “The Fixation Strength of HydroxyapatiteCoated Schanz Screws and Standard Stainless Steel Schanz Screws in Lower Extremity Lengthening: A Comparison Based on a New Torque Value Index: The Fixation Index,” Archives of Orthopaedic and Trauma Surgery, Vol. 126, No. 6, 2006, pp. 369-373.
http://dx.doi.org/10.1007/s00402-006-0142-5
|
[11]
|
A. Pommer, G. Muhr and A. David, “HydroxyapatiteCoated Schanz Pins in External Fixators Used for Distraction Osteogenesis: A Randomized, Controlled Trial,” Journal of Bone and Joint Surgery, Vol. 84A, No. 7, 2002, pp. 1162-1166.
|
[12]
|
M. J. Raschke and G. Schmidmaier, “Biological Coating of Implants in Trauma and Orthopedic Surgery,” Unfallchirurg, Vol. 107, No. 8, 2004, pp. 653-663.
|
[13]
|
S. Piskounova, J. Forsgren, U. Brohede, H. Engqvist and M. Strømme, “In Vitro Characterization of Bioactive Titanium Dioxide/Hydroxyapatite Surfaces Functionalized with BMP-2,” Journal of Biomedical Materials Research Part B, Vol. 91B, No. 2, 2009, pp. 780-787.
http://dx.doi.org/10.1002/jbm.b.31456
|
[14]
|
J. Forsgren, U. Brohede, H. Engqvist and M. Strømme, “Co-Loading of Bisphosphonates and Antibiotics to a Biomimetic Hydroxyapatite Coating,” Biotechnology Letters, Vol. 33, No. 6, 2011, pp. 1265-1268.
http://dx.doi.org/10.1007/s10529-011-0542-7
|
[15]
|
M. Lilja, J. Sorensen, U. Brohede, M. Astrand, J. Arnoldi, P. Procter, H. Steckel and M. Strømme, “Drug Loading and Release of Tobramycin from Hydroxyapatite Coated Fixation Pins,” Journal of Materials Science: Materials in Medicine, Vol. 24, No. 9, 2013, pp. 2265-2274.
http://dx.doi.org/10.1007/s10856-013-4979-1
|
[16]
|
U. Brohede, J. Forsgren, S. Roos, A. Mihranyan, H. Engqvist and M. Strømme, “Multifunctional Implant Coatings Providing Possibilities for Fast Antibiotics Loading with Subsequent Slow Release,” Journal of Materials Science: Materials in Medicine, Vol. 20, No. 9, 2009, pp. 1859-1867. http://dx.doi.org/10.1007/s10856-009-3749-6
|
[17]
|
J. Forsgren, U. Brohede, S. Piskounova, A. Mihranyan, S. Larsson, M. Strømme and H. Engqvist, “In Vivo Evaluation of Functionalized Biomimetic Hydroxyapatite for Local Delivery of Active Agents,” Journal of Biomaterials and Nanobiotechnology, Vol. 2, No. 2, 2011, pp. 149-154. http://dx.doi.org/10.4236/jbnb.2011.22019
|
[18]
|
M. Lilja, J. Forsgren, K. Welch, M. Astrand, H. Engqvist and M. Strømme, “Photocatalytic and Antimicrobial Properties of Surgical Implant Coatings of Titanium Dioxide Deposited though Cathodic Arc Evaporation,” Biotechnology Letters, Vol. 34, No. 12, 2012, pp. 2299-2305.
http://dx.doi.org/10.1007/s10529-012-1040-2
|
[19]
|
M. Lilja, C. Lindahl, W. Xia, H. Engqvist and M. Strømme, “The Effect of Si-Doping on the Release of Antibiotic from Hydroxyapatite Coatings,” Journal of Biomaterials and Nanobiotechnology, Vol. 4, No. 3, 2013, pp. 237-241. http://dx.doi.org/10.4236/jbnb.2013.43029
|
[20]
|
J. Aberg, U. Brohede, A. Mihranyan, M. Strømme and H. Engqvist, “Bisphosphonate Incorporation in Surgical Implant Coatings by Fast Loading and Co-Precipitation at Low Drug Concentrations,” Journal of Materials Science: Materials in Medicine, Vol. 20, No. 10, 2009, pp. 2053-2061. http://dx.doi.org/10.1007/s10856-009-3771-8
|
[21]
|
L. Sun, C. C. Berndt, K. A. Gross and A. Kucuk, “Material Fundamentals and Clinical Performance of Plasma-Sprayed Hydroxyapatite Coatings: A Review,” Journal of Biomedical Materials Research, Vol. 58, No. 5, 2001, pp. 570-592. http://dx.doi.org/10.1002/jbm.1056
|
[22]
|
H. W. Debissen, W. Kalk, H. M. de Nieuport, J. C. Maltha and A van deHooff, “Mandibular Bone Response to Plasma Sprayed Coatings of Hydroxyapatite,” International Journal of Prosthodontics, Vol. 3, No. 1, 1990, pp. 53-58.
|
[23]
|
A. David, J. Eitenmueller, G. Muhr, A. Pommer, H. F. Baer, P. A. W. Ostermann and T. A. Schildhauer, “Mechanical and Histological Evaluation of Hydroxyapatite-Coated, Titanium-Coated and Grit Blasted Surfaces under Weight-Bearing Conditions,” Archives of Orthopaedic and Trauma Surgery, Vol. 114, No. 2, 1995, pp. 112-118.
http://dx.doi.org/10.1007/BF00422838
|
[24]
|
R. J. Friedman, J. Black, K. A. Gustke, W. M. Braunohler, W.D. Guyer and C. Savory, “Four to Six Year Results of Hydroxyapatite Total Hip Arthroplasty,” 20th Annual Meeting of The Society of Biomaterials, 1994, p. 37.
|
[25]
|
H. Kurzweg, R. B. Heimann, T. Troczynski and M. L. Wayman, “Development of Plasma-Sprayed Bioceramics Coatings with Bond Coats Based on Titania and Zirconia,” Biomaterials, Vol. 19, No. 16, 1998, pp. 1507-1511.
http://dx.doi.org/10.1016/S0142-9612(98)00067-2
|
[26]
|
W. N Capello and T. W. Bauer, “Hydroxyapatite in Orthopedic Surgery,” In: H. U. Cameron, Ed., Bone Implant Interface, C.V. Mosby, St. Louis, 1994, pp. 191-202.
|
[27]
|
T. W. Bauer, “Hydroxyapatite: Coating Controversies,” Orthopedics, Vol. 18, No. 9, 1995, pp. 885-888.
|
[28]
|
J. Sorensen, M. Lilja, T. Sorensen, M. Astrand, P. Procter, M. Strømme and H. Steckel, “Co-Precipitation of Tobramycin into Hydroxyapatite Coatings,” unpublished.
|
[29]
|
K. A. Gross and M. Babovic, “Influence of Abrasion on the Surface Characteristics of Thermally Sprayed Hydroxyapatite Coatings,” Biomaterials, Vol. 23, No. 24, 2002, pp. 4731-4737.
http://dx.doi.org/10.1016/S0142-9612(02)00222-3
|
[30]
|
M. Lilja, K. Welch, M. Astrand, H. Engqvist and M. Strømme, “Effect of Deposition Parameters on the Photocatalytic Activity and Bioactivity of TiO2 Thin Films Deposited by Vacuum Arc on Ti-6Al-4V Substrates,” Journal of Biomedical Materials Research Part B, Vol. 100, No. 4, 2012, pp. 1078-1085.
http://dx.doi.org/10.1002/jbm.b.32674
|
[31]
|
A. Mihranyan, J. Forsgren, M. Strømme and H. Engqvist, “Assessing Surface Area Evolution during Biomimetic Growth of Hydroxyapatite Coatings,” Langmuir, Vol. 25, No. 3, 2009, pp. 1292-1295.
http://dx.doi.org/10.1021/la803520k
|
[32]
|
J. Sorensen, M. Lilja, T. Sorensen, M. Astrand, P. Procter, M. Strømme and H. Steckel, “Biomechanical and Antbacterial Properties of Hydroxyapatite Coated Fixation Pins,” unpublished.
|
[33]
|
“HPLC Detection of Gentamicin Sulphate,” In: British Pharmacopoeia, London, England, 1999, pp. 695-697.
|
[34]
|
H. Fabre, M. Sekkat, M. D. Blanchin and B. Mandrou, “Determination of Aminoglycosides in Pharmaceutical Formulations-II. High-Performance Liquid Chromatography,” Journal of Pharmaceutical and Biomedical Analysis, Vol. 7, No. 12, 1989, pp. 1711-1718.
http://dx.doi.org/10.1016/0731-7085(89)80185-2
|
[35]
|
M. D’Arrigo, G. Ginestra, G. Mandalari and P. M. Furneri, “Synergism and Postantibiotic Effect of Tobramycin and Melaleuca alternifolia (teatree) Oil against Staphylococcus aureus and Escherichia coli,” Phytomedicine, Vol. 17, No. 5, 2010, pp. 317-322.
http://dx.doi.org/10.1016/j.phymed.2009.07.008
|
[36]
|
S. Ban, S. Maruno, N. Arimoto, A. Harada and J. Hasegawa, “Effect of Electrochemically Deposited Apatite Coating on Bonding of Bone to the HA-G-Ti Composite and Titanium,” Journal of Biomedical Materials Research, Vol. 36, No. 1, 1997, pp. 9-15.
http://dx.doi.org/10.1002/(SICI)1097-4636(199707)36:1<9::AID-JBM2>3.0.CO;2-P
|
[37]
|
J. H. Lee, H. S. Ryu, K. S. Hong, D. S. Lee, K. B. S. Chang and C. K. Lee, “Biomechanical and Histomorphometric Study on the Bone-Screw Interface of Bioactive Ceramic-Coated Titanium Screws,” Biomaterials, Vol. 26, No. 16, 2005, pp. 3249-3257.
http://dx.doi.org/10.1016/j.biomaterials.2004.08.033
|
[38]
|
U. Brohede, S. Zhao, F. Lindberg A. Mihranyan, J. Forsgren, M. Strømme and H. Engqvist, “A Novel Graded Bioactive High Adhesion Implant Coating,” Applied Surface Science, Vol. 225, No. 17, 2009, pp. 7723-7728.
http://dx.doi.org/10.1016/j.apsusc.2009.04.149
|
[39]
|
A. Kuhn, T. McIff, J. Cordey, F. W. Baumgart and B. A. Rahn, “Bone Deformation by Thread-Cutting and ThreadForming Cortex Screws,” Injury, Vol. 26, No. 1, 1995, pp. 12-20. http://dx.doi.org/10.1016/0020-1383(95)90117-5
|
[40]
|
A. W. Kwok, J. A. Finkelstein, T. Woodside, T. C. Hearn and R. W. Hu, “Insertional Torque and Pull-Out Strengths of Conical and Cylindrical Pedicle Screws in Cadaveric Bone,” Spine, Vol. 21, No. 1, 1996, pp. 2429-2434.
http://dx.doi.org/10.1097/00007632-199611010-00004
|
[41]
|
A. F. Tencer and K. D. Johnson, “Biomechanics in Orthopedic Trauma,” In: Bone Fracture and Fixation, M. Dunitz, Ltd, London, 1994, pp. 118-157.
|
[42]
|
M. Capper, C. Soutis and O. O. A. Onit, “Comparison of the Stresses Generated at the Pin-Bone Interface by Standard and Conical External Fixator Pins,” Biomaterials, Vol. 15, No. 6, pp. 471-473.
http://dx.doi.org/10.1016/0142-9612(94)90227-5
|
[43]
|
A. Koistinen, S. S. Santavirta, H. Kroger and R. Lappalainen, “Effect of Bone Mineral Density and Amorphous Diamond Coatings on Insertion Torque of Bone Screws,” Biomaterials, Vol. 26, No. 28, 2005, pp. 5687-5694.
http://dx.doi.org/10.1016/j.biomaterials.2005.02.003
|
[44]
|
S. M. T. Chan, C. P. Neu, K. Komvopoulos and A. H. Redd, “The Role of Lubricant Entrapment at Biological Interfaces: Reduction of Friction and Adhesion in Articular Cartilage,” Journal of Biomechanics, Vol. 44, No. 11, 2011, pp. 2015-2020.
http://dx.doi.org/10.1016/j.jbiomech.2011.04.015
|