[1]
|
W. J. Hopp, R. Q. Zhang and M. L. Spearman, “An Easily Implementable Hierarchical Heuristic for a Two- Echelon Spare Parts Distribution System,” IIE Transactions, Vol. 31, No. 10, 1999, pp. 977-988.
|
[2]
|
P. H. Koo, J. Jang and J. Suh, “Estimation of Part Waiting Time and Fleet Sizing in AGV Systems,” International Journal of Flexible Manufacturing Systems, Vol. 16, No. 3, July 2005, pp. 211-228.
|
[3]
|
A. D. Wiggins, “A Minimum Cost Model of Spare Parts Inventory,” Technometrics, Vol. 9, No. 4, November 1967, pp. 661-665.
|
[4]
|
M. A. Geisler and H. W. Karr, “The Design of the Military Supply Tables for Spare Parts,” Operations Research, Vol. 4, No. 4, August 1956, pp. 431-442.
|
[5]
|
W. H. Hausman and L. J. Thomas, “Inventory Control with a Probabilistic Demand and Periodic Withdrawals,” Management Science, Vol. 18, No. 5, January 1972, pp. 265-275.
|
[6]
|
L. F. Gelders and P. M. Van Looy, “An Inventory Policy for Slow and Fast Movers in a Petrol-Chemical Plant: A Case Study,” Journal of the Operation Research Society, Vol. 29, No. 9, September 1978, pp. 867-874.
|
[7]
|
H. Block and H. Joe, “Tail Behaviour of the Failure Rate Functions of Mixtures,” Life Time Data Analysis, Vol. 3, No. 3, 1997, pp. 269-288.
|
[8]
|
M. Aka, S. M. Gilbert and P. Ritchken, “Joint Inventory/ Replacement Policies for Parallel Machines,” IIE Transactions, Vol. 29, No. 6, 1997, pp. 441-449.
|
[9]
|
W. K. Haneveld and R. H. Teunter, “Optimal Provisioning Strategies for Slow Moving Spare Parts with Small Lead Times,” Journal of the Operational Research Society, Vol. 48, No. 2, February 1997, pp. 184-194.
|
[10]
|
A. Mehrotra, N. R. Natraj and M. A. Trick, “Consolidating Maintenance Spares,” Computational Optimization and Applications, Vol. 18, No. 3, March 2001, pp. 251- 271.
|
[11]
|
L. W. G. Strijbosch, R. J. M. Heuts and E. H. M. van der Schoot, “A Combined Forecast Inventory Control Procedure for Spare Parts,” Journal of the Operational Research Society, Vol. 51, No. 10, October 2000, pp. 1184- 1192.
|
[12]
|
M. Fera, “Sviluppo di un Modello di Supporto a Decisione per la Gestione dell’Obsolescenza per Ricambi con alti Lead Times di Produzione e Appartenenti a Sistemi con Lunghi Cicli di Vita,” Ph.D. Dissertation, Federico II University, Naples, 2008.
|