[1]
|
C.N. Elias, J.H.C. Lima, R. Valiev, and M.A. Meyers, 2008 “Biomedical Applications of Titanium and its Alloys”, Journal of the Minerals, Metals and Materials Society, Vol. 60, No. 3, pp. 46-49.
|
[2]
|
David F. Williams, 1981, Biocompatibility of Clinical Implant Materials, 1st ed., CRC Press.
|
[3]
|
M. Younesi, M.E. Bahrololoom, M. Ahmadzadeh, 2010, “Prediction of wear behaviors of nickel free stainless steel–hydroxyapatite bio-composites using artificial neural network”, Computational Materials Science, Vol. 47, pp. 645–654.
|
[4]
|
Y.C. Tsui, C. Doyle, T.W. Clyne, 1998, “Plasma sprayed hydroxyapatite coatings on titanium substrates Part 1: Mechanical properties and residual stress levels”, Biomaterials Vol. 19, pp. 2015-2029.
|
[5]
|
C. Garc?a, S. Cere, A. Dura, 2004, “Bioactive coatings prepared by sol–gel on stainless steel 316L”, J. Non-Cryst. Solids, Vol. 348, pp. 218–224.
|
[6]
|
Xin Pang, Igor Zhitomirsky, 2007, “Electrophoretic deposition of composite hydroxyapatite-chitosan coatings”, Mater. Charac. Vol. 58, pp. 339–348.
|
[7]
|
W.U. Zhen-Jun, H.E.Li-ping, Chen Zong-Zhang, 2006, “Fabrication and characterization of hydroxyapatite/Al2O3 bio-composite coating on titanium, Trans. Nonferrous Met. SOC. China, Vol. 16, pp. 259-266.
|
[8]
|
M.H. Fathi, F. Azam, 2007, “Novel hydroxyapatite/tantalum surface coating for metallic dental implant”, Mater. Lett. Vol. 61, pp. 1238–1241.
|
[9]
|
Kantesh Balani, Yao Chen, Sandip P. Harimkar, Narendra B. Dahotre, Arvind Agarwal, 2007, “Tribological behavior of plasma-sprayed carbon nanotube-reinforced hydroxyapatite coating in physiological solution”, Acta Biomaterialia , Vol. 3, pp. 944–951.
|
[10]
|
M.F. Morks and Akira Kobayashi, 2007 “Effect of gun current on the microstructure and crystallinity of plasma sprayed Hydroxyapatite coating”, Applied Surface Science, Vol. 253, pp. 7136-7142.
|
[11]
|
M.F. Morks, N.F. Fahim and A. Kobayashi,2008, “Structure, mechanical performance and electrochemical characterization of plasma sprayed SiO2/Ti-reinforced hydroxyapatite biomedical coatings”, Applied Surface Science, Vol. 255, Part 2, pp. 3426-3433.
|
[12]
|
Wenxiu Que, K.A. Khor, J.L. Xu, L.G. Yu, 2008, “Hydroxyapatite/titania nanocomposites derived by combining high-energy ball milling with spark plasma sintering processes”, Journal of the European Ceramic Society, Vol. 28, pp. 3083–3090.
|
[13]
|
Huaxia Ji, P.M.Marquis, 1993, “Effect of heat treatment on the microstructure of plasmasprayed hydroxyapatite coating” Biomaterials, Vol. 14,No. 1,pp.64-68.
|
[14]
|
Yu Peng Lu , Yi Zhong Song, Rui Fu Zhu, Mu Sen Li, Ting Quan Lei, 2003, “ Factors influencing phase compositions and structure of plasma sprayed hydroxyapatite coatings during heat treatment” Applied Surface Science,Vol.206, pp. 345-354.
|
[15]
|
Shinn-jyh Ding, Tsui-hsien Huang, Chia-tze Kao, 2002, “Immersion behavior of plasma sprayed modified hydroxyapatite coatings after heat treatment”, Surface and Coatings Technology, Vol. 165, pp. 248-257.
|
[16]
|
Zhao Guo-liang, Wen Guang-wu, Wu Kun, 2009, “Influence of processing parameters and heat treatment on phase composition and microstructure of plasma sprayed hydroxyapatite coatings”, Trans. Nonferrous Met. Soc. China, vol.19, pp. 463- 469.
|
[17]
|
Bang Yen Chou, Edward Chang, 1999, “Microstructural characterization of plasma sprayed hydroxyapatite 10 wt % ZrO2 composite coating on titanium”, Biomaterials, Vol. 20, pp. 1823-1832.
|
[18]
|
Y.C. Tsui, C. Doyle and T.W. Clyne, 1998, “Plasma sprayed hydroxyapatite coatings on titanium substrates Part 2: optimization of coating properties”, Biomaterials 1998, 19, p2031-2043.
|
[19]
|
Singh Gurbhinder, Singh Surendra, Prakash Satya, (2011), “Surface characterization of plasma sprayed pure and reinforced hydroxyapatite coating on Ti 6Al 4V alloy”, Surface and Coatings Technology, Vol. 205, pp. 4814-4820.
|
[20]
|
Singh Gurbhinder, Singh Surendra, Prakash Satya, (2011), “Post Heat Treatment of Plasma Sprayed Pure and Alumina-Titania Reinforced Hydroxyapatite Coating on SS 304 Steel”, Journal of Minerals & Materials Characterization & Engineering, Vol. 10, No.2, pp.173-184.
|
[21]
|
Singh Gurbhinder, Singh Surendra, Prakash Satya, (2010), “Role of Post Heat Treatment of Plasma Sprayed Pure and Al2O3-TiO2 Reinforced Hydroxyapatite Coating on the Microstructure and Mechanical Properties”, published in Journal of Minerals & Materials Characterization & Engineering, Vol. 9, No.12, pp.1059-1069.
|
[22]
|
Tadashi Kokubo, 1990 “Surface chemistry of bioactive glass-ceramics” Journal of Non- Crystalline Solids, Vol. 120, pp.138-151.
|
[23]
|
B. Viswanath, N. Ravishankar, 2006, “Interfacial reactions in hydroxyapatite/alumina nano-composites”, Scripta Materialia, Vol. 55, pp. 863–866.
|
[24]
|
Lee Yi-Pang, Wang Chih-Kuang, Huang Tsui-Hsien, Chen Chun-Cheng, Kao Chia-Tze, Ding Shinn-Jyh, 2005, “In vitro characterization of post heat-treated plasma-sprayed hydroxyapatite coatings”, Surface & Coatings Technology, Vol. 197, pp. 367– 374.
|
[25]
|
Chen C.C., Huang T.H., Kao C.T., Ding S.J., 2004, “Electrochemical study of the in vitro degradation of plasma-sprayed hydroxyapatite/bioactive glass composite coatings after heat treatment”, Electrochimica Acta, Vol. 50, pp. 1023–1029.
|