Recycling Practices of Spent MgO-C Refractories ()
Abstract
The recycling options of spent MgO-C refractories from an electrical arc furnace (EAF) have been evaluated. The economic, quality of spent refractories and products made from it, the ease of implementation of a recycling practice and the interest of steel melt shops were considered. It was decided that the best option of most EAF shops would be to recycle spent
MgO-C refractory as a foaming slag conditioner because of their MgO content. Crushed MgO-C spent refractories can be reused directly back into an EAF without complex and costly beneficiation. Even though this practice is simple, it is critical to know the optimum amount of MgO in the slag to achieve the best foaming quality. A computer model was designed to find the optimum MgO amount. This modeling also helps the melt shop extend refractory service life, increase the energy efficiency, increase productivity, and decrease
the amount of slag. Issues related to the refractory recycling will be discussed.
Share and Cite:
K. Kwong and J. Bennett, "Recycling Practices of Spent MgO-C Refractories,"
Journal of Minerals and Materials Characterization and Engineering, Vol. 1 No. 2, 2002, pp. 69-78. doi:
10.4236/jmmce.2002.12005.
Conflicts of Interest
The authors declare no conflicts of interest.
References
|
[1]
|
Iron & Steelmaker “EAF Roundup” Iron & Steelmaker, 26 [5] 16-28 (1999).
|
|
[2]
|
D. Capodilupo, P. Masucci, G. Brascugli, V. De Angelis “Operating Improvements in
Electric Steel Production on Terni EAF after Introduction of Slag Foaming Practice,”
Proceeding of the Sixth International Iron and Steel Congress, 98-104 (1990). Nagoya, ISIJ.
|
|
[3]
|
E. Pretorius, “Slag Fundamentals”; in An Introduction to the Theory and Practice of EF
Steelmaking, Iron & Steel Society short course book, New Orleans, LA Nov. 15, 1998.
|
|
[4]
|
A. Jones, A.Gladwin “Slag Fundamentals”; in An Introduction to the Theory and Practice of EF Steelmaking, Iron & Steel Society short course book, New Orleans, LA Nov. 15, 1998.
|
|
[5]
|
K. S. Kwong, J. P. Bennett “Balancing MgO for Foamy Slag and Refractory Protection” D.L.Schroeder & Associates, Twenty Second Annual Sympsium, Process Systems for Electric Furnace Steelmaking, Orlando, Florida, November 9 &10, 2000
|
|
[6]
|
I.Kimihisa, R. Fruehan “Slag Foaming in Electric Furnace Steelmaking” Electric Furnace
Procedings 345-351 (1987).
|