Thermal Model of High-Speed Spindle Units
Jeong-Du Kim, Igor Zverv, Keon-Beom Lee
DOI: 10.4236/iim.2010.25036   PDF    HTML     5,981 Downloads   11,782 Views   Citations


For the purpose to facilitate development of high-speed Spindle Units (SUs) running on rolling bearings, we have developed a beam element model, algorithms, and software for computer analysis of thermal characteristics of SUs. The thermal model incorporates a model of heat generation in rolling bearings, a model of heat transfer from bearings, and models for estimation of temperature and temperature deformations of SU elements. We have carried out experimental test and made quantitative evaluation of the effect of operation conditions on friction and thermal characteristics of the SUs of grinding and turning machines of typical structures. It is found that the operation conditions make stronger effect on SU temperatures when rpm increases. A comparison between the results of analysis and experiment proves their good mutual correspondence and allows us to recommend application of the models and software developed for design and research of high-speed SUs running on rolling bearings.

Share and Cite:

J. Kim, I. Zverv and K. Lee, "Thermal Model of High-Speed Spindle Units," Intelligent Information Management, Vol. 2 No. 5, 2010, pp. 306-315. doi: 10.4236/iim.2010.25036.

Conflicts of Interest

The authors declare no conflicts of interest.


[1] Z. M. Levina, I. G. Gorelik, I. A. Zverev and A. P. Segida, “Computer Analysis of Elastic-Deformation, Dynamic, and Temperature Characteristics of Spindle Units at Designing,” Proceedings of Moscow Research Institute of Machine Tools, Russia, 1989, pp. 3-89.
[2] I. A. Zverev and A. V. Push, “Spindle Units: Quality and Reliability at Designing,” Moscow State University of Technology Press, Russia, 2000.
[3] A. I. Leontiev, “The Theory of Heat Interchange,” High School, Moscow, 1979.
[4] N. A. Spitsin and S. G. Atras, “Friction Losses in Rolling Bearings,” Proceedings of Moscow Institute of Bearing Industry, Russia, 1966, pp. 121-130.
[5] A. C. Palmgren, “Grundlage der Waelzlagertechnik,” Auflage, Stuttgart, 2000.
[6] A. M. Figatner, “The Effect of Radial Clearance-Tight- ness of Roller Bearings of Precise Spindle Units,” Journal of Machines & Cutting Tools, Vol. 2, No. 1, 1967, pp. 15-18.
[7] K. G. Gan and L. M. Zaitov, “Dependence of Friction Torque of High-Speed Ball Bearing on Rotation Speed and Axial Preloading,” Bulletin of Machine Industry, Vol. 11, No. 5, 1988, pp. 21-23.
[8] V. I. Dzuba, “Effective Lubricant Systems for High- Speed Spindle Units on Rolling Bearings,” Ph.D. Dessertation, Moscow Research Institute of Machine Tools, Moscow, 1985.
[9] K. Brandlein, “Machining Spindle and its Bearings,” Proceedings of the Symposium of FAG Company, Moscow Research Institute of Machine Tools, Moscow, 1985, pp. 52-78.
[10] L. J. Segerind, “Applied Finite Element Analysis,” John Wiley & Sons Inc., New York/London/Sydney/Toronto, 1976.
[11] G. Forsythe, M. Malcoln and C. Moler, “Computer Methods for Mathematical Computations,” Prentice-Hall, Englewood Cliffs, New Jersy, 1977.
[12] D. S. Kodnir, “Contact Hydrodynamics of Lubrication,” Mashinosrtoenie, Moscow, 1979.
[13] A. I. Smirnov, “Optimisation of Lubrication Systems of High-Speed Spindle Units,” Proceedings of Moscow Engineering Research Institute, Moscow, 1979, pp. 3-69.

Copyright © 2024 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.