Measurements of Balun and Gap Effects in a Dipole Antenna
Constantinos Votis, Vasilis Christofilakis, Panos Kostarakis
DOI: 10.4236/ijcns.2010.35057   PDF    HTML     8,254 Downloads   15,546 Views   Citations


In the present paper, design and analysis of a 2.4 GHz printed dipole antenna for wireless communication applications are presented. Measurements on return loss and radiation pattern of this antenna configuration are included in this investigation. The printed dipole is combined with the feeding structure of a microstrip via-hole balun and is fabricated on an FR-4 printed-circuit-board substrate. Two inevitable discontinuities are introduced by this antenna architecture in the form of right-angle bends in the microstrip feed line and in the dipole’s gap, respectively. The impact of mitering these bends in the reflection coefficient, resonance bandwidth and radiation pattern of antenna has been investigated by means of simulation and experiment.

Share and Cite:

C. Votis, V. Christofilakis and P. Kostarakis, "Measurements of Balun and Gap Effects in a Dipole Antenna," International Journal of Communications, Network and System Sciences, Vol. 3 No. 5, 2010, pp. 434-440. doi: 10.4236/ijcns.2010.35057.

Conflicts of Interest

The authors declare no conflicts of interest.


[1] D. Edward and D. Rees, “A Broadband Printed Dipole with Integrated Balun,” Microwave Journal, Vol. 30, No. 5, 1987, pp. 339-344.
[2] N. Michishita, H. Arai, M. Nakano, T. Satoh and T. Mat- suoka, “FDTD Analysis for Printed Dipole Antenna with Balun,” Asia Pacific Microwave Conference, Sydney, 2000, pp. 739-742.
[3] G. S. Hilton, C. J. Railton, G. J. Ball, A. L. Hume and M. Dean, “Finite–Difference Time–Domain Analysis of a Printed Dipole Antenna,” 19th International IEEE Antennas and Propagation Conference, Eindhoven, 1995, pp. 72-75.
[4] H.-R. Chuang, L.-C. Kuo, “3-D FDTD Design Analysis Of a 2.4 GHz Polarization–Diversity Printed Dipole Antenna with Integrated Balun and Polarization–Swit- ching Circuit for Wlan and Wireless Communication Application,” IEEE Transactions on Microwave Theory and Techniques,Vol. 51, No. 2, 2003, pp. 374-381.
[5] C. Votis, V. Christofilakis, P. Kostarakis, “Geometry Aspects and Experimental Results of a Printed Dipole Antenna,” International Journal Communications, Net- work and System Sciences, Vol. 3, No. 2, 2010, pp. 97- 100.
[6] C. A. Balanis, “Antenna Theory Analysis and Design,” Wiley Interscience, New York, 1997.
[7] R. Garg, P. Bhartia, I. Bahl and A. Ittipiboon, “Microstrip Antenna Design Handbook,” Artec House, Canton, 2001.
[8] D. M. Pozar, “Microwave Engineering,” Wiley, New York, 1998.

Copyright © 2024 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.