[1]
|
P. R. Fernandes, J. Folgado, C. Jacobs, and V. Pellegrini, (2002) A contact model with ingrowth control for bone remodelling around cementless stems, Journal of Biomechanics, 35, 167–176.
|
[2]
|
P. Kowalczyk, (2001) Design optimization of cementless femoral hip prostheses using finite element analysis, Journal of Biomechanical Engineering, 123, 396–402.
|
[3]
|
J. H. Keyak, (2001) Improved prediction of proximal femoral fracture load using nonlinear finite element models, Medical Engineering & Physics, 23, 165–173.
|
[4]
|
M. Viceconti, L. Bellingeri, L. Cristofolini, and A. Toni, (1998) A comparative study on different methods of automatic mesh generation of human femurs, Medical Engineering & Physics, 20, 1–10.
|
[5]
|
M. Lengsfeld, J. Schmitt, P. Alter, J. Kaminsky, and R. Leppek, (1998) Comparison of geometry-based and CT voxel-based finite element modelling and experimental validation, Medical Engineering & Physics, 20, 515–522.
|
[6]
|
J. Y. Rho, M. C. Hobatho, and R. B. Ashman, (1995) Relations of mechanical properties to density and CT numbers in human bone, Medical Engineering & Physics, 17, 347–355.
|
[7]
|
D. R. Carter and W. C. Hayes, (1977) The compressive behav-iour of bone as a two-phase porous structure, The Journal of Bone and Joint Surgery, American Volume, 59, 954–962.
|
[8]
|
D. C. Wirtz, N. Schiffers, T. Pandorf, K. Radermacher, D. Weichert, and R. Forst, (2000) Critical evaluation of known bone material properties to realize anisotropic FE-simulation of the proximal femur, Journal of Biomechanics, 33, 1325–1330.
|
[9]
|
M. C. Hobatho, R. Darmana, P. Pastor, J. J. Barrau, S. Laroze, and J. P. Morucci, (1991) Development of a three-dimensional finite element model of a human tibia using experimental mo-dal analysis, Journal of Biomechanics, 24, 371–383.
|
[10]
|
B. Merz, P. Niederer, R. Muller, and P. Ruegsegger, (1996) Automated finite element analysis of excised human femora based on precision-QCT, Journal of Biomechanical Engineer-ing, 118, 387–390.
|
[11]
|
J. H. Keyak and S. A. Rossi, (2000) Prediction of femoral fracture load using finite element models: An examination of stress- and strain-based failure theories, Journal of Biome-chanics, 33, 209–214.
|
[12]
|
D. D. Cody, F. J. Hou, G. W. Divine, and D. P. Fyhrie, (2000) Femoral structure and stiffness in patients with femoral neck fracture, Journal of Orthopaedic Research: Official Publication of the Orthopaedic Research Society, 18, 443–448.
|
[13]
|
R. L. Austman, J. S. Milner, D. W. Holdsworth, and C. E. Dunning, (2008) The effect of the density-modulus relationship selected to apply material properties in a finite element model of long bone, Journal of Biomechanics, 41, 3171–3176.
|
[14]
|
M. Dalstra, R. Huiskes, and L. van Erning, (1995) Develop-ment and validation of a three-dimensional finite element model of the pelvic bone, Journal of Biomechanical Engineer-ing, 117, 272–278.
|
[15]
|
P. M. Cattaneo, M. Dalstra, and L. H. Frich, (2001) A three-dimensional finite element model from computed tomo-graphy data: A semi-automated method, Proceedings of the Institution of Mechanical Engineers, Part H, Journal of Engi-neering in Medicine, 215, 203–213.
|
[16]
|
C. Zannoni, R. Mantovani, and M. Viceconti, (1998) Material properties assignment to finite element models of bone struc-tures: A new method, Medical Engineering & Physics, 20, 735–740.
|
[17]
|
F. Taddei, A. Pancanti, and M. Viceconti, (2004) An improved method for the automatic mapping of computed tomography numbers onto finite element models, Medical Engineering & Physics, 26, 61–69.
|
[18]
|
F. Taddei, E. Schileo, B. Helgason, L. Cristofolini, and M. Viceconti, (2007) The material mapping strategy influences the accuracy of CT-based finite element models of bones: an evaluation against experimental measurements, Medical Engi-neering & Physics, 29, 973–979.
|
[19]
|
B. Helgason, F. Taddei, H. Pálsson, E. Schileo, L. Cristofolini, M. Viceconti, and S. Brynjólfsson, (2008) A modified method for assigning material properties to FE models of bones, Medical Engineering & Physics, 30, 444–453.
|
[20]
|
R. B. Ashman, S. C. Cowin, W. C. Van Buskirk, and J. C. Rice, (1984) A continuous wave technique for the measurement of the elastic properties of cortical bone, Journal of Biomechanics, 17, 349–361.
|
[21]
|
W. A. Kalender, (1992) A phantom for standardization and quality control in spinal bone mineral measurements by QCT and DXA: Design considerations and specifications, Medical Physics, 19, 583–586.
|
[22]
|
D. Besdo and M. Handel, (1998) Numerical treatment of bone as anisotropic material, Biomedical Technology, 39, 293–298.
|