C. Bayer, M. Gamble, R. Gentry and S. Joshi, “AIA Guide to Building Life Cycle Assessment in Practice,” The American Institute of Architects, Washington DC, 2010. [29] ATHENA Institute, “The Impact Estimator for Buildings,” 2011.
http://athenasmi.org/tools/impactEstimator/ [30] ATHENA Institute, “The EcoCalculator for Buildings,” 2011.
http://athenasmi.org/tools/ecoCalculator/index.html [31] Z. Kapelan, D. Savic and G. Walters, “Decision-Suppport Tools for Sustainable Urban Development,” Proceedings of the Institution of Civil Engineers, Engineering Sustainability, Vol. 158, No. 3, 2005, pp. 135-142. [32] S. Rahman, S. Perera, H. Odeyinka and Y. Bi, “A Knowledge-Based Decision Support System for Roofing Mate- rials selection and Cost Estimating: A Conceptual Framework and Catamodelling,” 25th Annual ARCOM Conference, Nottingham, 7-9 September 2009, pp. 1-10. [33] S. Rahman, S. Perera, H. Odeyinka and Y. Bi, “A Con- ceptual Knowledge-Based Cost Model for Optimising the Selection of Material and Technology for Building Design,” In: A. R. J. Dainty, Ed, 24th Annual ARCOM Conference, Association of Researchers in Construction Man- agement, University of Glamorgan, 1-3 September 2008, pp. 217-225. [34] E. Loh, T. Crosbie, N. Dawood and J. Dean, “A Framework and Decision Support System to Increase Building Life Cycle Energy Performance,” Journal of Information Technology in Construction, Vol. 15, No. 2, 2010, pp. 337-353. [35] G. K. C. Ding, “Sustainable Construction: The Role of Environmental Assessment Tools,” Journal of Environmental Management, Vol. 86, No. 3, 2008, pp. 451-464.
http://dx.doi.org/10.1016/j.jenvman.2006.12.025 [36] C. Hopfe, C. Struck, et al., “Exploration of Using Building Performance Simulation Tools for Conceptual Building Design,” IBPSA-NVL Conference, Delft, 20 October 2005, pp. 1-8. [37] R. S. Perera and U. Fernando, “Cost Modelling for Roofing Material Selection,” Built Environment: Srilanka, Vol. 3, No. 1, 2002, pp. 11-24. [38] A. Mohamed and T. Celik, “An Integrated Knowledge-Based System for Alternative Design and Materials Selection and Cost Estimating,” Expert Systems with Applications, Vol. 14, No. 3, 1998, pp. 329-339. http://dx.doi.org/10.1016/S0957-4174(97)00086-9 [39] M. A. A. Mahmoud, M. Aref and A. Al-Hammad, “An Expert System for Evaluation and Selection of Floor Finishing Materials,” Expert Systems with Applications, Vol. 10, No. 2, 1996, pp. 281-303. http://dx.doi.org/10.1016/0957-4174(95)00054-2 [40] K. Lam and N. Wong, “A study of the Use of Performance Based Simulation Tools for Building Design and Evaluation in Singapore,” IBPSA, Kyoto, 1999. [41] J. L. Chen, S. H. Sun and W. C. Hwang, “An Intelligent Data Base System for Composite Material Selection in Structural Design,” Engineering Fracture Mechanics, Vol. 50, No. 5-6, 1995, pp. 935-946. http://dx.doi.org/10.1016/0013-7944(94)E0068-R [42] G. Soronis, “An Approach to the Selection of Roofing Materials for Durability,” Construction and Building Materials, Vol. 6, No. 1, 1992, pp. 9-14. [43] I. Giorgetti and A. Lovell, “Sustainable Building Practices for Low Cost Housing: Implications for Climate Change Mitigation and Adaptation in Developing Countries,” Giorgetti and Lovell, South Africa, 2010. [44] R. Ellis, “Who Pays for Green Buildings? The Economics of Sustainable Buildings,” CB Richard Ellis and EMEA Research, New York, 2009. [45] R. J. Cole, “Building Environmental Assessment Methods: Redefining Intentions and Roles,” Building Research and Information, Vol. 35, No. 5, 2005, pp. 455-467. [46] R. J. Cole, G. Lidnsey and J. A. Todd, “Assessing Life Cycles: Shifting from Green to Sustainable Design,” Proceedings: International Conference Sustainable Building, Rotterdam, 22-25 October 2000, pp. 22-24. [47] R. K. Yin, “Case Study Research: Design and Methods,” 4th Edition, Sage Publications, Los Angeles, 2009. [48] B. Reza, R. Sadiq and K. Hewage, “Sustainability Assessment of Flooring Systems in the City of Tehran: An AHP-Based Life Cycle Analysis,” Construction and Building Materials, Vol. 25, No. 4, 2011, pp. 2053-2066. [49] D. K. H. Chua, Y. C. Kog and P. K. Loh, “Critical Success Factors for Different Project Objectives,” Journal of Construction Engineering and Management, Vol. 125, No. 3, 1999, pp. 142-150.
http://dx.doi.org/10.1061/(ASCE)0733-9364(1999)125:3(142) [50] T. L. Saaty, “Relative Measurement and Its Generalization in Decision Making Why Pairwise Comparisons Are Central in Mathematics for the Measurement of Intangible Factors the Analytic Hierarchy/Network Process,” RACSAM-Revista de la Real Academia de Ciencias Exactas, Fisicas y Naturales. Serie A. Matematicas, Vol. 102, No. 2, 2008, pp. 251-318. [51] T. L. Saaty, “Time Dependent Decision-Making; Dynamic Priorities in the AHP/ANP: Generalizing From Points to Functions and from Real to Complex Variables,” Mathematical and Computer Modelling, Vol. 46, No. 7-8, 2007, pp. 860-891 [52] T. L. Saaty, “Decision Making for Leaders: The Analytic Hierarchy Process for Decisions in a Complex World,” RWS Publications, Pittsburgh, 2001. [53] T. L. Saaty, “Fundamentals of the Analytic Hierarchy Process,” RWS Publications, Pittsburgh, 2000. [54] T. L. Saaty, “Fundamentals of Decision Making and Priority Theory with the Analytic Hierarchy Process,” RWS Publishers, Pittsburgh, 1994. [55] T. L. Saaty, “The Analytic Hierarchy Process,” McGraw-Hill, New York, 1980. [56] J. A. Alonso and M. T. Lamata, “Consistency in the Analytic Hierarchy Process: A New Approach,” International Journal of Uncertainty, Fuzziness and Knowledge-Based Systems, Vol. 14, No. 4, 2006, pp. 445-459. http://dx.doi.org/10.1142/S0218488506004114 [57] P. Gluch and H. Baumann, “The Life Cycle Costing (LCC) Approach: A Conceptual Discussion of its Usefulness for Environmental Decision Making,” Building and Environment, Vol. 39, No. 5, 2004, pp. 571-580. http://dx.doi.org/10.1016/j.buildenv.2003.10.008 [58] C. J. Kibert, “Sustainable Construction: Green Building Design and Delivery,” 2nd Edition, John Wiley and Sons, Inc., Hoboken, 2008. [59] R. Spiegel and D. Meadows, “Green Building Materials: A Guide to Product Selection and Specification,” John Wiley & Sons, Inc., New York, 2010, pp. 1-7. [60] M. F. Ashby and K. Johnson, “Materials and Design: The Art and Science of Material Selection in Product Design,” Butterworth-Heinemann, Oxford, Boston, 2002. [61] J. F. Hair, R. E. Anderson, R. L. Tatham and W. C. Black, “Multivariate Data Analysis,” Prentice Hall, Upper Saddle River, 1998.

  
comments powered by Disqus

Copyright © 2020 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.