Study on Chitosan-Lactate Sponges with Oriented Pores as Potential Wound Dressing

DOI: 10.4236/msa.2013.48056   PDF   HTML     4,194 Downloads   6,074 Views   Citations


The motive of this work was to provide an inexpensive potential wound dressing using chitosan lactate (LCH) which was synthesized by the grafting lactic acid onto the amino groups in chitosan (CH) without a catalyst. The XRD and 13CNMR results demonstrated that the grafting by lactic acid took place at C2 site in CH, leading to the destruction of the regularity of the packing in the original CH chains and formation of the amorphous CH salts. The unique device was developed in our experiments which could yield an approximately vertical thermal gradient, forming the uniformly vertical pores in LCH sponges. TEM images revealed that both TBA and LCH concentration affected the micro-structure of the sponges, although they worked via different mechanisms. In the water suction experiments, the capillary coefficient Ks was introduced to evaluate the structure-function relationship. The positive or negative influence of LCH, TBA and porosity on Ks clearly stood out when their relationships were plotted graphically. The in vitro biocompatibility of LCH sponges was evaluated. The results obtained indicated that LCH sponges exhibited bio-safety at lower concentration (25%) during short time (1 day). However, highly concentrated extraction showed a serious toxic effect on both HSF and HaCaT cells. The release kinetics for hydrophilic and hydrophobic drugs with different formulation sponges was determined in in vitro release experiments. The contribution of the drug diffusion, matrix erosion and microstructure of porous materials must be taken into account on the release mechanism. The method and the structure described in present paper provided a starting point for the design and fabrication of a family of chitosan derivatives based porous materials with potentially broad applicability

Share and Cite:

C. Lai, Y. Chen and S. Zhang, "Study on Chitosan-Lactate Sponges with Oriented Pores as Potential Wound Dressing," Materials Sciences and Applications, Vol. 4 No. 8, 2013, pp. 458-470. doi: 10.4236/msa.2013.48056.

Conflicts of Interest

The authors declare no conflicts of interest.


[1] S. W. Ali, M. Joshi and S. Rajendran, “Shape and Surface Charge of Chitosan Nanoparticles with Reference to Antimicrobial Activity,” Advanced Science Letters, Vol. 3, No. 4, 2010, pp. 452-460.
[2] H. Hattori, Y. Amano and Y. Nogami, “Hemostasis for Severe Hemorrhage with Photocrosslinkable Chitosan Hydrogel and Calcium Alginate,” Annals of Biomedical Engineering, Vol. 38, No. 12, 2010, pp. 3724-3732.
[3] M. R. Saboktakin, R. M. Tabatabaie, A. Maharramov and M. A. Ramazanov, “Synthesis and Characterization of Biodegradable Chitosan Beads as Nano-Carriers for Local Delivery of Satranidazole,” Carbohydrate Polymers, Vol. 81, No. 3, 2010, pp. 726-731.
[4] B. Carreno-Gómez and R. Duncan, “Valuation of the Biological Properties of Soluble Chitosan and Chitosan Microspheres,” International Journal of Pharmaceutics, Vol. 148, No. 2, 1997, pp. 231-240.
[5] R. A. A. Muzzarelli, “Modified Chitosans Carrying Sulfonic Acid Group,” Carbohydrate Polymers, Vol. 19, No. 4, 1992, pp. 231-236.
[6] N. Saranya, A. Moorthi, S. Saravanan, M. P. Devi and N. Selvamurugan, “Chitosan and Its Derivatives for Gene Delivery,” International Journal of Biological Macromolecules, Vol. 48, No. 2, 2011, pp. 234-238.
[7] D. W. Michael and H. H. K. Xu, “Osteoblastic Induction on Calcium Phosphate Cement-Chitosan Constructs for Bone Tissue Engineering,” The Journal of Biomedical Materials Research A, Vol. 94A, No. 1, 2010, pp. 223-233.
[8] K. Kasraian and P. P. DeLuca, “Thermal Analysis of the Tertiary Butyl Alcohol-Water System and Its Implications on Freeze-Drying,” Pharmaceutical Research, Vol. 12, No. 4, 1995, pp. 484-490.
[9] D. J. Drooge, W. L. Hinrichs and H. W. Frijlink, “Incorporation of Lipophilic Drugs in Sugar Glasses by Lyophilization Using a Mixture of Water and Tertiary Butyl Alcohol as Solvent,” Journal of Pharmaceutical Sciences, Vol. 93, No. 3, 2004, pp. 713-725.
[10] P. L. Kang, S. J. Chang, I. Manousakas, C. W. Lee, C. H. Yao, F. H. Lin and S. M. Kuo, “Development and AsSessment of Hemostasis Chitosandressings,” Carbohydrate Polymers, Vol. 85, No. 3, 2011, pp. 565-570.
[11] R. Jayakumar, M. Prabaharan, P. T. Sudheesh Kumar, S. V. Nair and H. Amura, “Biomaterials Based on Chitin and Chitosan in Wound Dressing,” Biotechnology Advances, Vol. 29, No. 3, 2010, pp. 322-337.
[12] S. C. M. Fernandes, C. S. R. Freire, A. J. D. Silvestre, C. P. Neto and A. Gandini, “Novel Materials Based on Chitosan and Cellulose,” Polymer International, Vol. 60, No. 6, 2011, pp. 875-882.
[13] Y. Q. Goh and C. P. Ooi, “Fabrication and Characterization of Porous Poly(L-Lactide) Scaffolds Using SolidLiquid Phase Separation,” Journal of Materials Science: Materials in Medicine, Vol. 19, No. 6, 2008, pp. 2445-2452.
[14] H. Saito, R. Tabeta and K. Ogawa, “High-Resolution SolidState Carbon-13 NMR Study of Chitosan and Its Salts with Acids: Conformational Characterization of Polymorphs and Helical Structures as Viewed from the Conformation-Dependent Carbon-13 Chemical Shifts,” Macromolecules, Vol. 20, No. 10, 1987, pp. 2424-2430.
[15] M. C. R. Symons, “Hydrogen-Bonded Solvent Systems,” Covington and Jones, London, 1968.
[16] S. V. Madihallya and H. W. Matthew, “Porous Chitosan Scaffolds for Tissue Engineering, Structure and Properties of Bilayer Chitosan-Gelatin Scaffolds,” Biomaterials, Vol. 20, No. 12, 1999, pp. 1133-1142.
[17] J. S. Mao, L. G. Zhao, Y. J. Yin and K. D Yao, “Structure and Properties of Bilayer Chitosan-Gelatin Scaffolds,” Biomaterials, Vol. 24, No. 6, 2003, pp. 1067-1074.
[18] R. J. Gummerson, C. Hall and W. D. Hoff, “The Suction Rate and the Sorptivity of Brick,” Transactions and Journal of the British Ceramic Society, Vol. 80, No. 5, 1981, pp. 150-152.
[19] R. Mariarosa, D. Michele, G. Davide, G. Guia and M. Francesca, “Predicting the Initial Rate of Water Absorption in Clay Bricks,” Construction and Building Materials, Vol. 23, No. 7, 2009, pp. 2623-2630.
[20] J. Bear, “Dynamics of Fluids in Porous Media,” Elsevier, New York, 1972.
[21] USP XXII, NF XVII [S], “Toxicity classification in US Pharmacopeia,” United States Pharmacopeial Convention, Inc., 1990, 2069.
[22] B. Carreno-Gómez and R. Duncan, “Evaluation of the Biological Properties of Soluble Chitosan and Chitosan Microspheres,” International Journal of Pharmaceutics, Vol. 14, No. 2, 2013, pp. 4174-4184.
[23] C. Wiegand, D. Winte and U. C. Hipler, “Molecular-WeightDependent Toxic Effects of Chitosans on the Human Keratinocyte Cell Line HaCaT,” Skin Pharmacology and Physiology, Vol. 23, No. 3, 2010, pp. 164-170.
[24] D. M. Morgan, J. Clover and J. D. Pearson, “Effects of Synthetic Polycations on Leucine Incorporation, Lactate Dehydrogenase Release, and Morphology of Human Umbilical Vein Endothelial Cells,” Journal of Cell Science, Vol. 91, No. 2, 1988, pp. 231-238.
[25] D. M. Morgan, V. L. Larvin and J. D. Pearson, “Biochemical Characterisation of Polycation-Induced Cytotoxicity to Human Vascular Endothelial Cells,” Journal of Cell Science, Vol. 94, No. 3, 1989, pp. 553-559.
[26] V. Lemaire, J. Bélair and P. Hildgen, “Structural Modeling of Drug Release from Biodegradable Porous Matrices Based on a Combined Diffusion/Erosion Process,” International Journal of Pharmaceutics, Vol. 258, No. 1-2, 2003, pp. 95-98.
[27] L. L. Lao, N. A. Peppas, F. Y. Boey and S. S. Venkatraman, “Modeling of Drug Release from Bulk-Degrading Polymers,” International Journal of Pharmaceutics, Vol. 418, No. 3, 2011, pp. 28-41.

comments powered by Disqus

Copyright © 2020 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.