Gear Drive Mechanism for Continuous Variable Valve Timing of IC Engines

DOI: 10.4236/eng.2013.53035   PDF   HTML     12,395 Downloads   18,770 Views   Citations


Continuous variable valve actuating (CVVA) technology provides high potential in achieving high performance, low fuel consumption and pollutant reduction. To get full benefits from (CVVT) various types of mechanisms have been proposed and designed. Some of these mechanisms are in production and have shown significant benefits in improving engine performance. In this investigation a newly designed gear drive mechanism that controls the intake valve opening (IVO) and closing (IVC) angles is studied. The control scheme is based on maximizing the engine brake power (P) and specific fuel consumption (BSFC) at any engine speed by continuously varying the phase between the cam shaft angle and the crank shaft angle. A single-cylinder engine is simulated by theLOTUS” software to find out the optimum phase angle for maximum power and minimum fuel consumption at a given engine speed. The mechanism is a planetary gear drive designed for precise and continuous control. This mechanism has a simple design and operation conditions which can change the phase angle without limitation.

Share and Cite:

O. Ghazal and M. Dado, "Gear Drive Mechanism for Continuous Variable Valve Timing of IC Engines," Engineering, Vol. 5 No. 3, 2013, pp. 245-250. doi: 10.4236/eng.2013.53035.

Conflicts of Interest

The authors declare no conflicts of interest.


[1] S. Bohac and D. Assanis, “Effects of Exhaust Valve Timing on Gasoline Engine Performance and Hydrocarbon Emissions,” SAE Technical Paper No. 2004-01-058, 2004.
[2] T. H. Ma, “Effect of Variable Engine Valve Timing on Fuel Economy,” SAE Technical Paper No. 880390, 1988.
[3] C. Gray, “A Review of Variable Engine Valve Timing,” SAE Technical Paper No. 880386, 1988.
[4] T. Ahmad and M. A. Theobald, “A Survey of Variable Valve-Actuation Technology,” SAE Technical Paper No. 891674, 1989.
[5] T. Dresner and P. Barkan, “A Review and Classification of Variable Valve Timing Mechanisms,” SAE Paper, No. 890667, 1989.
[6] S. Diana, B. Lorio, V. Giglio and G. Police, “The Effect of Valve Lift Shape and Timing on Air Motion and Mixture Formation of DISI Engines Adopting Different VVA Actuators,” SAE Paper No. 2001-01-3553, 2001.
[7] P. Kreuter, P. Heuser and M. Schebitz, “Strategies to Improve SI-Engine Performance by Means of Variable Intake Lift, Timing and Duration,” SAE Paper No. 920449, 1992.
[8] G. Fontana and E. Galloni, “Variable Valve Timing for Fuel Economy Improvement in a Small Spark-Ignition Engine,” Applied Energy, Vol. 39, No. 86, 2009, pp. 96-105. doi:10.1016/j.apenergy.2008.04.009
[9] Y. Ping, X. Zhang, Y. Dong, G. Zhu and Q. Wang, “Study on Performance Improvement of Vehicle Engine by Using Variable Cam Timing,” Chinese Internal Combustion Engine Engineering, Vol. 29, No. 6, 2008, pp. 20-23.
[10] H. S. Yan, M. C. Tsai and M. H. Hsu, “An Experimental Study of the Effects of Cam Speed on Cam-Follower Systems,” Mechanism and Machine Theory, Vol. 31, No. 4, 1996, pp. 397-412. doi:10.1016/0094-114X(95)00087-F
[11] F. Bozza, A. Gimelli, A. Senatore and A. Caraceni, “A Theoretical Comparison of Various VVA Systemsfor Performance and Emission Improvement of SI Engines,” SAE Technical Paper No. 2001-01-0670, 2001.
[12] N. Kosuke, K. Hiroyuki and K. Kazuya, “Valve Timing and Valve Lift Control Mechanism for Engines,” Mechatronics, Vol. 16, No. 5, 2006, pp. 121-129.
[13] W. H. Hsieh, “An Experimental Study on Cam Controlled Planetary Gear Trains,” Mechanism and Machine Theory, Vol. 42, No. 5, 2007, pp. 513-525. doi:10.1016/j.mechmachtheory.2006.10.006
[14] W.-H. Hsieh, “Kinematic Synthesis of Cam-Controlled Planetary Gear Trains,” Mechanism and Machine Theory, Vol. 44, No. 3, 2009, pp. 873-895. doi:10.1016/j.mechmachtheory.2008.07.001
[15] H. S. Yan and W. R. Chen, “On the Output Motion Characteristics of Variable Speed Input Servo-Controlled SliderCrank Mechanisms,” Mechanism and Machine Theory, Vol. 35, No. 4, 2000, pp. 541-561. doi:10.1016/S0094-114X(99)00023-3
[16] H. Hong, G. B. Parvate-Patil and B. Gordon, “Review and Analysis of Variable Valve Timing Strategies-Eight Ways to Approach,” Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, Vol. 218, No. 10, 2004, pp. 1179-1200. doi:10.1177/095440700421801013
[17] F. Bozza, A. Gimelli and R. Tuccillo, “The Control of a VVA-Equipped SI Engine Operation by Meansof 1D Simulation and Mathematical Optimization,” SAE Technical Paper No. 2002-01-1107, 2002.

comments powered by Disqus

Copyright © 2020 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.