The Two-Dimensional Simulation Study of Flow Pattern near Guiding Wall of Oxidation Ditch

DOI: 10.4236/jwarp.2010.29096   PDF   HTML     4,688 Downloads   8,096 Views  

Abstract

Guiding wall is used to change the flow of the oxidation ditch as supporting structure, it widely uses eccentric setting, and its setting parameters are mostly empirical judgments. According to fluent software that simulates the velocity distribution of the guiding wall, to discuss the settings of the guiding wall in different length of downstream extension, eccentricity and guiding wall radius, so to work out its optimized settings.

Share and Cite:

W. Chen and M. Xu, "The Two-Dimensional Simulation Study of Flow Pattern near Guiding Wall of Oxidation Ditch," Journal of Water Resource and Protection, Vol. 2 No. 9, 2010, pp. 814-817. doi: 10.4236/jwarp.2010.29096.

Conflicts of Interest

The authors declare no conflicts of interest.

References

[1] X. M. Zhao, Q. H. Zhang, T. L. Huang and P. Zhang, “Sludge Sedimentation Curve Analysis and Hydraulic Calculation of Oxidation Ditch,” Chinese Water Supply and Drainage, Vol. 24, No. 6, 2008, pp. 38-40.
[2] J. Xu, “On the Research of the Role of Guiding Wall in the Water Structures,” Environment, No. S2, 2006, pp. 135-136.
[3] CECS 112:2000. Oxidation ditch design specifications.
[4] Y. Cao and J. Z. Fu, “Measure to Improve the Oxidation Ditch Velocity Distribution,” China Water & Wastewater, Vol. 17, No. 2, 2001, pp. 16-18.
[5] X. M. Zhao, X. Wang and A. J. Wang, “Oxidation Ditch Bend Flow Characteristics,” Environmental Science and Technology, Vol. 31, No. 4, 2008, pp. 104-106.

  
comments powered by Disqus

Copyright © 2020 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.