Author(s)

Wiranphat Thodsaratpreeyakul¹, Putinun Uawongsuwan², Akio Kataoka³, Takanori Negoro⁴, Hiroyuki Hamada⁵

¹Department of Biobased Materials Science, Kyoto Institute of Technology, Kyoto, Japan.
²Department of Materials and Production Technology Engineering, King Mongkut's University of Technology North Bangkok, Bangkok, Thailand.
³NIHON YUKI Co., Ltd., Kanagawa, Japan.
⁴NEGORO SANGYO Co., Ltd., Osaka, Japan.
⁵Tradition Mirai Education Research Center, Kyoto Institute of Technology, Kyoto, Japan.

The interfacial shear strength value measuring by the modified Kelly-Tyson equation method was studied the measurement accuracy. The measuring accuracy by using the modified Kelly-Tyson equation method is compared to the nano-indentation testing method. The results and an influential factor are described. An error in the modified Kelly-Tyson equation is verified to avoid the incorrect measurement when the interfacial shear strength was measured by the modified Kelly-Tyson equation. To study the different interfacial shear strength behavior, short fiber reinforced PET composites were fabricated. In this study, an advance fabricating technique for short fiber reinforced composite as direct fiber feeding process is conducted to fabricate GF/recycled PET for studying the interfacial shear strength. The result indicates that the modified Kelly-Tyson equation method accurately provides the accurate interfacial shear strength value, if it is conducted with the sample without a horizontally aligned fiber. So the high fiber loading content sample should be avoided to get the more accuracy result. The large horizontally aligned fiber area into specimens extremely resulted in the incorrect measurement of the interfacial shear strength value by the modified Kelly-Tyson equation method. The fiber agglomeration factor and the sensitively horizontally aligned fiber area must be considered its influence on the measuring for improving the equation effectiveness.

Interfacial Shear Strength, Kelly-Tyson, Composites, Poly Ethylene Terephthalate, Injection Molding

Thodsaratpreeyakul, W. , Uawongsuwan, P. , Kataoka, A. , Negoro, T. and Hamada, H. (2017) The Determination of Interfacial Shear Strength in Short Fiber Reinforced Poly Ethylene Terephthalate by Kelly-Tyson Theory. Open Journal of Composite Materials, 7, 218-226. doi: 10.4236/ojcm.2017.74015.