|
[1]
|
Effects of 3D-printing processing parameters on FFF parts' porosity: outlook and trends
|
|
Materials and Manufacturing Processes,
2024 |
|
|
|
[2]
|
Investigation on mechanical properties of polyamide 6 and carbon fiber reinforced composite manufactured by fused deposition modeling technique
|
|
Journal of Thermoplastic …,
2024 |
|
|
|
[3]
|
Analysis of shrinkage and dimensional accuracy of additively manufactured tooling for the composite manufacturing
|
|
International Journal on Interactive Design and …,
2024 |
|
|
|
[4]
|
Photocurable comb polyamic acid for solvent-free direct ink writing with low dimensional shrinkage
|
|
European Polymer Journal,
2024 |
|
|
|
[5]
|
Machine Learning in Biomaterials, Biomechanics/Mechanobiology, and Biofabrication: State of the Art and Perspective
|
|
Archives of Computational Methods in …,
2024 |
|
|
|
[6]
|
3D printing processes in precise drug delivery for personalized medicine
|
|
…,
2024 |
|
|
|
[7]
|
Nozzle temperature calibration in 3D printing
|
|
International Journal on …,
2024 |
|
|
|
[8]
|
Influence of the Heated-Bed Material on PLA Mechanical Properties and Energy Consumption in the FDM Process
|
|
Arabian Journal for …,
2024 |
|
|
|
[9]
|
Comparative study of experimental thermographic data and finite element analysis on temperature evolution of PET-G layer deposition during additive manufacturing …
|
|
Bulletin of the Polish …,
2024 |
|
|
|
[10]
|
Influence of Thermal Treatment on Surface Roughness, Microstructural, and Mechanical Properties of 3D Printed ABS
|
|
2024 |
|
|
|
[11]
|
Check for Sustainability of Fused Deposition Modeling: The Role of the Plate Material Ersilia Cozzolino (), Francesco Napolitano, Antonello Astarita, Valentina …
|
|
Dynamic Response and Failure of Composite …,
2023 |
|
|
|
[12]
|
Ποιοτική διερεύνηση (βελτιστοποίηση–μοντελοποίηση) παραμέτρων της τρισδιάστατης εκτύπωσης πολυμερών υλικών για την παραγωγή λεπτότοιχων φυσικών …
|
|
2023 |
|
|
|
[13]
|
Міцність і пружність PLA+ графіт композитів: експериментальний і теоретичний аналіз
|
|
Mechanics and Advanced …,
2023 |
|
|
|
[14]
|
A Review on the Impact of Polylactic Acid (PLA) Material on Products Manufactured Using Fused Deposition Modeling (FDM) Additive Manufacturing Method
|
|
Gazi Mühendislik Bilimleri …,
2023 |
|
|
|
[15]
|
Experimental Investigation of Build Time During ABS Filament Material Extrusion Process
|
|
International Conference on Textile …,
2023 |
|
|
|
[16]
|
Effect of Printing Parameters on the Internal Geometry of Products Manufactured by Fused Filament Fabrication (FFF)
|
|
Núñez,
2023 |
|
|
|
[17]
|
Material extrusion-based additive manufacturing: G-code and firmware attacks and Defense frameworks
|
|
2023 |
|
|
|
[18]
|
Investigation of the impact of the short fiber reinforcements on the thermal and mechanical properties of polymer-based composites manufactured by material …
|
|
The International Journal of …,
2023 |
|
|
|
[19]
|
Influence of Raster Orientation and Feeding Rate on the Mechanical Properties of Short Carbon Fiber-Reinforced Polyamide Printed by Fused-Filament Fabrication
|
|
Filho - 3D Printing and Additive Manufacturing,
2023 |
|
|
|
[20]
|
Characterisation of print path deviation in material extrusion
|
|
Progress in Additive Manufacturing,
2023 |
|
|
|
[21]
|
Recycling of Acrylonitrile Butadiene Styrene from Electronic Waste for the Production of Eco-Friendly Filaments for 3D Printing
|
|
3D Printing and …,
2023 |
|
|
|
[22]
|
Optimization of process parameters in additive manufacturing based on the finite element method
|
|
arXiv preprint arXiv:2310.15525,
2023 |
|
|
|
[23]
|
Establishing a Framework for Fused Filament Fabrication Process Optimization: A Case Study with PLA Filaments
|
|
Polymers,
2023 |
|
|
|
[24]
|
Acrylonitrile butadiene styrene/thermoplastic polyurethane blends for material extrusion three-dimensional printing: effects of blend composition on printability and …
|
|
ACS …,
2023 |
|
|
|
[25]
|
Additive Manufacturing for Phase Change Thermal Energy Storage and Management
|
|
Additive Manufacturing,
2023 |
|
|
|
[26]
|
A Bayesian regularization network approach to thermal distortion control in 3D printing
|
|
Computational Mechanics,
2023 |
|
|
|
[27]
|
Facilitating the additive manufacture of high-performance polymers through polymer blending: A review
|
|
European Polymer …,
2023 |
|
|
|
[28]
|
Strategies To Modify the Surface and Bulk Properties of 3D-Printed Solid Scaffolds for Tissue Engineering Applications
|
|
ACS …,
2023 |
|
|
|
[29]
|
Optimizing fused filament fabrication process parameters for quality enhancement of PA12 parts using numerical modeling and taguchi method
|
|
Heliyon,
2023 |
|
|
|
[30]
|
Prediction of The Mechanical Behavior of Polylactic Acid Parts with Shape Memory Effect Fabricated by FDM
|
|
Polymers,
2023 |
|
|
|
[31]
|
Development of a large-scale multi-extrusion FDM printer, and its challenges
|
|
International Journal of …,
2023 |
|
|
|
[32]
|
Adhesion behaviour of 3D printed polyamide–carbon fibre composite filament
|
|
Reviews on Advanced …,
2022 |
|
|
|
[33]
|
High-performance polymer 3D printing–Open-source liquid cooled scalable printer design
|
|
HardwareX,
2022 |
|
|
|
[34]
|
The Effects of Toolpath and Glass Fiber Reinforcement on Bond Strength and Dimensional Accuracy in Fused Filament Fabrication of a Hot Melt Adhesive
|
|
THE EFFECT OF …,
2022 |
|
|
|
[35]
|
Influência da temperatura ambiente no comportamento mecânico do PLA utilizado em manufatura aditiva
|
|
Matéria (Rio de Janeiro),
2022 |
|
|
|
[36]
|
Development of a Finite Element Modelling Procedure for the Prediction of Deformation in Components Produced by the Fused Depositional Modelling Process
|
|
2022 |
|
|
|
[37]
|
Estudio y diseño de materiales de impresión 3d que soporten los sistemas de esterilización médicos
|
|
2022 |
|
|
|
[38]
|
АДДИТИВНЫЕ ТЕХНОЛОГИИ ПРОИЗВОДСТВА ДЕТАЛЕЙ ЖИДКОСТНОКОЛЬЦЕВОГО ВАКУУМНОГО НАСОСА ДЛЯ ПРОЦЕССОВ АПК
|
|
НАУКА В ЦЕНТРАЛЬНОЙ РОССИИ,
2022 |
|
|
|
[39]
|
The effects of toolpath and glass fiber reinforcement on bond strength and dimensional accuracy in material extrusion of a hot melt adhesive
|
|
Additive Manufacturing,
2022 |
|
|
|
[40]
|
Additive Manufacturing of Large Size Parts Through Retrofitment of Three-Axes CNC Machining Centre
|
|
2022 |
|
|
|
[41]
|
Key parameters controlling surface quality and dimensional accuracy: A critical review of FFF process
|
|
Materials and …,
2022 |
|
|
|
[42]
|
A multi-parametric process evaluation of the mechanical response of PLA in FFF 3D printing
|
|
Materials and …,
2022 |
|
|
|
[43]
|
Controlling the properties of parts 3D printed from recycled thermoplastics: A review of current practices
|
|
de-Oliveira… - Polymer Degradation and …,
2022 |
|
|
|
[44]
|
Use of Auxetic Infill Structures for the Compensation of Shrinkage in Fused Filament Fabrication Process
|
|
… Conference on Flexible …,
2022 |
|
|
|
[45]
|
Sustainability of Fused Deposition Modeling: The Role of the Plate Material
|
|
… Symposium on Dynamic …,
2022 |
|
|
|
[46]
|
A study of variation in the cross-sectional areas of thermoplastic filaments on lattice structures manufactured by fused filament fabrication
|
|
2021 |
|
|
|
[47]
|
Effect of the ironing process on parts produced by Fused Filament Fabrication
|
|
2021 |
|
|
|
[48]
|
Autor
|
|
2021 |
|
|
|
[49]
|
Thickness effect on the mechanical behavior of PLA specimens fabricated via Fused Deposition Modeling
|
|
Procedia Structural Integrity,
2021 |
|
|
|
[50]
|
On the impact of additive manufacturing processes complexity on modelling
|
|
Applied Sciences,
2021 |
|
|
|
[51]
|
Shrinkage Compensation for FFF Printing for PLA, ABS, and PETG Thermoplastics
|
|
2021 |
|
|
|
[52]
|
Spatiotemporal G-code modeling for secure FDM-based 3D printing
|
|
2021 |
|
|
|
[53]
|
Research on the Fused Deposition Modeling of Polyether Ether Ketone
|
|
2021 |
|
|
|
[54]
|
Fused filament fabrication of novel phase-change material functional composites
|
|
2021 |
|
|
|
[55]
|
Effect of process parameters on thermal and mechanical properties of polymer‐based composites using fused filament fabrication
|
|
Polymer …,
2021 |
|
|
|
[56]
|
Spatio-temporal analysis and monitoring of temperature in extrusion-based AM processes
|
|
2021 |
|
|
|
[57]
|
Computational and empirical modeling of additive manufacturing processes
|
|
2021 |
|
|
|
[58]
|
Study on the Optimal 3D Printing Conditions for Waterproof Thermal Manikin Generation
|
|
Textile Science and …,
2021 |
|
|
|
[59]
|
Improvement of thermal conditions in extrusion additive manufacturing of ULTEM
|
|
2021 |
|
|
|
[60]
|
Process and Material Modifications to Enable New Material for Material Extrusion Additive Manufacturing
|
|
2020 |
|
|
|
[61]
|
Solvent-free UV-curable Acrylic Adhesives for 3D printer build sheet
|
|
2020 |
|
|
|
[62]
|
Effect of infill pattern and density on tensile properties of 3d printed polylactic acid parts via fused deposition modeling (FDM)
|
|
2020 |
|
|
|
[63]
|
Widely accessible 3D printing technologies in chemistry, biochemistry and pharmaceutics: applications, materials and prospects
|
|
2020 |
|
|
|
[64]
|
DIMENSIONAL ACCURACY OF FUSED FILAMENT FABRICATION BY CASSAVA ADHESION ON PRINTING PLATFORM
|
|
2020 |
|
|
|
[65]
|
Общедоступные технологии 3D-печати в химии, биохимии и фармацевтике: приложения, материалы, перспективы
|
|
2020 |
|
|
|
[66]
|
Design of a low-cost, high-temperature inverted build environment to enable desktop-scale additive manufacturing of performance polymers
|
|
2020 |
|
|
|
[67]
|
Study on the 3D printability of poly (3-hydroxybutyrate-co-3-hydroxyvalerate)/poly (lactic acid) blends with chain extender using fused filament fabrication
|
|
2020 |
|
|
|
[68]
|
3D printing of glass by additive manufacturing techniques: A review
|
|
2020 |
|
|
|
[69]
|
Thermographic Analysis of 3D Printed Dental Models
|
|
2020 |
|
|
|
[70]
|
A Short Review on Automobile Dashboard Materials
|
|
2020 |
|
|
|
[71]
|
Study on the 3D printability of poly(3-hydroxybutyrate-co-3-hydroxyvalerate)/poly(lactic acid) blends with chain extender using fused filament fabrication
|
|
2020 |
|
|
|
[72]
|
Influence of bed temperature on warpage, shrinkage and density of various acrylonitrile butadiene styrene (ABS) parts from fused deposition modelling (FDM)
|
|
2020 |
|
|
|
[73]
|
A Review on New 3-D Printed Materials' Geometries for Catalysis and Adsorption: Paradigms from Reforming Reactions and CO2 Capture
|
|
2020 |
|
|
|
[74]
|
EFFECTS OF PRINTING CONDITIONS ON PROPERTIES OF POLYCARBONATE SAMPLES MADE BY FUSED FILAMENT FABRICATION PROCESS
|
|
2019 |
|
|
|
[75]
|
Direct Ink Writing of High Performance Architectured Polyimides with Low Dimensional Shrinkage
|
|
2019 |
|
|
|
[76]
|
Investigation For Shrinkage Deformation In The Desktop 3D Printer Process By Using DOE Approach Of The ABS Materials
|
|
2019 |
|
|
|
[77]
|
Eriyik Biriktirme Yönteminde Farklı Üretim Parametrelerinin Mekanik Özelliklere Etkisi
|
|
ALKü Fen Bilimleri Dergisi,
2019 |
|
|
|
[78]
|
Enhanced mechanical properties of plasticized polylactic acid filament for fused deposition modelling: Effect of in situ heat treatment
|
|
2019 |
|
|
|
[79]
|
Experimental Investigations and Parametric Optimization of Selective Inhibition Sintering Process
|
|
2019 |
|
|
|
[80]
|
Fused deposition modelling of kenaf fibre/thermoplastic polyurethane/epoxidized natural rubber composites
|
|
2019 |
|
|
|
[81]
|
Polylactide/hemp hurd biocomposites as sustainable 3D printing feedstock
|
|
2019 |
|
|
|
[82]
|
Developing protein-based bio-inks for FDM 3D printed microfluidic and millifluidic biosensor applications
|
|
2019 |
|
|
|
[83]
|
Accuracy (trueness and precision) of dental models fabricated using additive manufacturing methods
|
|
2018 |
|
|
|
[84]
|
Characterization and Processing Behavior of Heated Aluminum-Polycarbonate Composite Build Plates for the FDM Additive Manufacturing Process
|
|
Journal of Manufacturing and Materials Processing,
2018 |
|
|
|
[85]
|
Vpliv zapolnitve na mehanske lastnosti izdelkov iz PLA in ABS narejenih po metodi ciljnega nalaganja
|
|
2018 |
|
|
|
[86]
|
Avaliação dos parâmetros de processamento em impressão 3D nas propriedades do poliácido lático
|
|
2018 |
|
|
|
[87]
|
Accuracy (trueness and precision) of dental models fabricated using additive manufacturing methods.
|
|
International journal of …,
2018 |
|
|
|
[88]
|
Study of Different Printing Design Type Polymer Samples Prepared by Additive Manufacturing
|
|
2017 |
|
|
|
[89]
|
PENENTUAN PARAMETER OPTIMUM DALAM PERAKITAN 3D PRINTER REPRAP DAN PEMBUATAN PRODUK
|
|
2017 |
|
|
|
[90]
|
An investigation on applying different types of adhesive to reduce warping deformation in open source 3D printer
|
|
2017 |
|
|