|
[1]
|
Various FDM mechanisms used in the fabrication of continuous-fiber reinforced composites: a review
|
|
Polymers,
2024 |
|
|
|
[2]
|
Robot-assisted laser additive manufacturing for high-strength/low-porosity continuous fiber-reinforced thermoplastic composites
|
|
Composites Science and …,
2024 |
|
|
|
[3]
|
Parametric study of piezoresistive structures in continuous fiber reinforced additive manufacturing
|
|
Composites Part C …,
2024 |
|
|
|
[4]
|
Mechanical and dynamic performance of 3D-printed continuous carbon fibre Onyx composites
|
|
Van, C Peng, P Tran, S Wickramasinghe… - Thin-Walled …,
2024 |
|
|
|
[5]
|
Modeling of the coefficient of thermal expansion of 3D-printed composites
|
|
International Journal of Mechanical …,
2024 |
|
|
|
[6]
|
Comprehensive analysis of 3D printed PA6. 6 and fiber‐reinforced variants: Revealing mechanical properties and adhesive wear behavior
|
|
Polymer Composites,
2024 |
|
|
|
[7]
|
High stiffness 3D-printed continuous pitch carbon fiber reinforced polymer composites
|
|
Journal of …,
2024 |
|
|
|
[8]
|
Investigation on process window of 3D printed continuous glass fiber‐reinforced thermosetting composites
|
|
Polymer Composites,
2024 |
|
|
|
[9]
|
Additive manufacturing and microstructure effects on thermal and mechanical properties of ply-hybrid carbon and glass fiber composites
|
|
González, JGM Caraballo… - Composites Part B …,
2024 |
|
|
|
[10]
|
Kink band orientation of 3D printed continuous carbon fiber composites under compressive loading
|
|
Advanced Composite …,
2024 |
|
|
|
[11]
|
Additive manufacturing of hybrid continuous carbon/basalt fiber reinforced composites based on bi-matrix co-extrusion
|
|
Journal of Materials …,
2024 |
|
|
|
[12]
|
Comprehensive parametric analyses on the mechanical performance of 3D printed continuous carbon fibre reinforced plastic
|
|
Composite Structures,
2024 |
|
|
|
[13]
|
Assessment of the effects of the addition of continuous fiber filaments in PA 6/short fiber 3D-printed components using interrupted in-situ x-ray CT tensile testing
|
|
Engineering Failure Analysis,
2024 |
|
|
|
[14]
|
Effects of fiber layout on strength and failure of 3D printed notched composites
|
|
Composite Structures,
2024 |
|
|
|
[15]
|
High-Throughput Additive Manufacturing of Continuous Carbon Fiber-Reinforced Plastic by Multifilament
|
|
Polymers,
2024 |
|
|
|
[16]
|
Polymer Composites in 3D/4D Printing: Materials, Advances, and Prospects
|
|
Molecules,
2024 |
|
|
|
[17]
|
Developing Eco-Friendly 3D-Printing Composite Filament: Utilizing Palm Midrib to Reinforce High-Density Polyethylene Matrix in Design Applications
|
|
Saka, GE Hassan… - Polymers,
2024 |
|
|
|
[18]
|
4D printing of fiber-reinforced auxetic structures: the building blocks: A review
|
|
Smart Materials and …,
2024 |
|
|
|
[19]
|
Performance enhancement of 3D‐printed carbon fiber‐reinforced nylon 6 composites
|
|
Polymer …,
2024 |
|
|
|
[20]
|
Inter-bead void reduction by crossing printing routes of fused filament fabricated composites
|
|
Rapid Prototyping …,
2024 |
|
|
|
[21]
|
On mechanical characterization and damage analysis of additively manufactured continuous fiber/poly‐lactic acid bio‐composite using in‐nozzle technique
|
|
Polymer Composites,
2024 |
|
|
|
[22]
|
Investigation of a 3D Printing Method for Continuous Carbon Fiber-Reinforced Thermosetting Epoxy Composite
|
|
Applied Composite …,
2024 |
|
|
|
[23]
|
Systematic Development of a Novel Laser-Sintering Machine with Roving Integration and Sustainability Evaluation
|
|
Machines,
2024 |
|
|
|
[24]
|
Innovative continuous polypropylene fiber composite filament for material extrusion
|
|
Progress in Additive Manufacturing,
2024 |
|
|
|
[25]
|
Characterization of mechanical properties, efficiency, and design considerations for the additive manufacturing of hybrid composites with continuous fibers
|
|
Hybrid Advances,
2024 |
|
|
|
[26]
|
A novel hybrid multi-criteria optimization of 3D printing process using grey relational analysis (GRA) coupled with principal component analysis (PCA)
|
|
Engineering Research Express,
2024 |
|
|
|
[27]
|
Evolution of Pharmaceuticals using 3D and 4D Printing
|
|
Intelligent Pharmacy,
2024 |
|
|
|
[28]
|
Green Manufacturing of Natural Fiber Composite
|
|
Sustainable Machining and Green …,
2024 |
|
|
|
[29]
|
Does Thin-Walled Metal Pipe Insertion Increase the Bending Strength of 3D Printed Parts?
|
|
2024 IEEE/SICE International Symposium …,
2024 |
|
|
|
[30]
|
Sustainability in Smart Manufacturing: Trends, Scope, and Challenges
|
|
2024 |
|
|
|
[31]
|
3D Printing and New Product Development: Opportunities and Challenges
|
|
3D Printing and …,
2024 |
|
|
|
[32]
|
Experimental Study of Mechanical Properties and Numerical Simulation of 3D Printed Carbon Fiber Reinforced Polymer Composites
|
|
Olympiad in Engineering Science,
2024 |
|
|
|
[33]
|
Screw Extrusion-Based Additive Manufacturing of Polycarbonate, Polyether Ether Ketone (PEEK) and Continuous Fiber–Reinforced PEEK Composites
|
|
2024 |
|
|
|
[34]
|
4 Investigations on
|
|
Advances in Pre-and Post-Additive Manufacturing …,
2024 |
|
|
|
[35]
|
DIRECT DIGITAL MANUFACTURE OF CONTINUOUS FIBER REINFORCED THERMOPLASTIC HIGH ASPECT RATIO COMPOSITE GRID STIFFENERS AND …
|
|
2024 |
|
|
|
[36]
|
Non-destructive evaluation of 3D-printed fibre-reinforced composite materials mechanical behaviour
|
|
Thermosense …,
2024 |
|
|
|
[37]
|
連続炭素繊維強化熱可塑性プラスチックの 3 D プリントにおける力学特性向上技術
|
|
成形加工,
2024 |
|
|
|
[38]
|
Selection of best 3D printing parameters for fused deposition modeling part using a novel hybrid multi-criteria optimization technique
|
|
Surface Review and Letters,
2024 |
|
|
|
[39]
|
64 Investigations on the Mechanical Characterization of Additively Manufactured Polymer Composite Materials Fabricated Via MEX
|
|
Advances in Pre-and …,
2024 |
|
|
|
[40]
|
Intégration des contraintes liées aux matériaux composites dans la conception et la fabrication de produits industriels
|
|
2023 |
|
|
|
[41]
|
Pengaruh Merk Filamen Pla Terhadap Kuat Tarik Spesimen Uji Astm D638 Type V
|
|
Jurnal Inovasi …,
2023 |
|
|
|
[42]
|
Caractérisation mécanique d'un demi-anneau circulaire thermoplastique imprimé par impression 3D et renforcé par des fibres de carbone continues
|
|
Pantel… - … Nationales sur les …,
2023 |
|
|
|
[43]
|
Termoplásticos de prestaciones térmicas y mecánicas para la impresión 3D de moldes para el procesado de composites
|
|
2023 |
|
|
|
[44]
|
Continuous carbon fibre reinforced plastic composites–additive manufacturing, characterisation and modelling
|
|
2023 |
|
|
|
[45]
|
高速高强熔融沉积成型技术研究进展
|
|
中国塑料,
2023 |
|
|
|
[46]
|
Desenvolvimento de filamento compósito de matriz termoplástica de PLA com reforço híbrido de fibras curtas de carbono e contínuas de Kevlar29 para manufatura …
|
|
2023 |
|
|
|
[47]
|
Analysis of Low Cost 3D Printer Process Parameters and Their Influence on Manufacturing Functionality of Printed Parts
|
|
IX Latin American …,
2023 |
|
|
|
[48]
|
Mechanical and Tribological Properties of Polymer Composites Developed by FDM
|
|
… Applications of 3D …,
2023 |
|
|
|
[49]
|
Design of a Parameterized Mannequin Using Rapid Prototyping Technology
|
|
International Conference …,
2023 |
|
|
|
[50]
|
Research progress in high⁃ speed and high⁃ strength fused deposition molding technology
|
|
China …,
2023 |
|
|
|
[51]
|
A Review of Laminated Object Manufacturing (LOM) Aspects and Various Processes used in It
|
|
International Journal of Advanced …,
2023 |
|
|
|
[52]
|
Effect of temperature conditions of a heated plate on the crystallization of CFRTP
|
|
Mechanical Engineering Journal,
2023 |
|
|
|
[53]
|
The influences of international standards on structural performance and fracture behaviour of 3D printed long fiber composite structures
|
|
IOP Conference Series …,
2023 |
|
|
|
[54]
|
Evaluation of Tensile Strength and Repeatability of 3D Printed Carbon Fiber Materials and Processes
|
|
3D Printing and Additive …,
2023 |
|
|
|
[55]
|
Submodels of the model of dynamic deformation of a transversally isotropic thermoelastic medium for solving the problems of horizontal crack formation at 3D printing
|
|
Acta Mechanica,
2023 |
|
|
|
[56]
|
Optimization of nozzle for pre-impregnated continuous fiber reinforced 3D printing
|
|
Journal of Composite …,
2023 |
|
|
|
[57]
|
Experimental and numerical investigation of the mechanical properties of 3D-printed hybrid and non-hybrid composites
|
|
Polymers,
2023 |
|
|
|
[58]
|
Simultaneous Optimization of Carbon Fiber Allocation and Orientation by IFM-GA
|
|
Chinese Journal of Mechanical Engineering: Additive …,
2023 |
|
|
|
[59]
|
Mechanical properties of additively printed, UV cured, continuous fiber unidirectional composites for multifunctional applications
|
|
Journal of …,
2023 |
|
|
|
[60]
|
Innovative unidirectional recycled carbon fiber tape structure for high performance thermoplastic composites: technological developments, technology-structure …
|
|
2023 |
|
|
|
[61]
|
Functional 3D-Printed Polymeric Materials with Metallic Reinforcement for Use in Cut-Resistant Gloves
|
|
Kowalska - Materials,
2023 |
|
|
|
[62]
|
3D-Printed Sandwiched Acrylonitrile Butadiene Styrene/Carbon Fiber Composites: Investigating Mechanical, Morphological, and Fractural Properties
|
|
Journal of Materials …,
2023 |
|
|
|
[63]
|
Dual nozzle 3D printing strategy to improve the surface quality of continuous glass fiber reinforced polyamide 6 composites
|
|
Journal of Applied …,
2023 |
|
|
|
[64]
|
Glimpses of 3D Printing in the 21st Century
|
|
Development, properties, and …,
2023 |
|
|
|
[65]
|
High accuracy 3D printing of composite materials using CNT yarns
|
|
Composite Structures,
2023 |
|
|
|
[66]
|
3D Printing Technology for Short-continuous Carbon Fiber Synchronous Reinforced Thermoplastic Composites: A Comparison between Towpreg Extrusion …
|
|
Chinese Journal of …,
2023 |
|
|
|
[67]
|
Exploring optimal adaptive process parameters for curved infill paths of additive manufactured carbon fibre reinforced polymers
|
|
Composites …,
2023 |
|
|
|
[68]
|
A Review on Additive Manufacturing–Methods, Materials, and its Associated Failures
|
|
Advances in Science and …,
2023 |
|
|
|
[69]
|
Application of interlaminar shear strength and finite element modeling for failure analysis of 3D printed continuous fiber-reinforced composites
|
|
Progress in Additive …,
2023 |
|
|
|
[70]
|
3D printing in biomedicine: advancing personalized care through additive manufacturing
|
|
Exploration of …,
2023 |
|
|
|
[71]
|
3D-printing of Continuous Fiber: A review of processes, materials and properties
|
|
Polymer-Plastics Technology …,
2023 |
|
|
|
[72]
|
Effect of Manufacture-Induced Interfaces on the Tensile Properties of 3D Printed Polyamide and Short Carbon Fibre-Reinforced Polyamide Composites
|
|
Polymers,
2023 |
|
|
|
[73]
|
Nonlinear behavior mechanism of change in electrical resistance on 3D printed carbon fiber/PA6 composites during cyclic tests
|
|
Advanced Composite Materials,
2023 |
|
|
|
[74]
|
3D Printing of continuous fiber composites using two-stage UV curable resin
|
|
Materials …,
2023 |
|
|
|
[75]
|
Thermomechanical performance of continuous carbon fibre composite materials produced by a modified 3D printer
|
|
Heliyon,
2023 |
|
|
|
[76]
|
Three-Dimensional Printing of Multifunctional Composites: Fabrication, Applications, and Biodegradability Assessment
|
|
Krowiak - Materials,
2023 |
|
|
|
[77]
|
Low‐temperature 3D printing and curing process of continuous fiber‐reinforced thermosetting polymer composites
|
|
polymer …,
2023 |
|
|
|
[78]
|
Compressive properties and failure mechanisms of 3D-printed continuous carbon fiber-reinforced auxetic structures
|
|
Composites …,
2023 |
|
|
|
[79]
|
Mode I, mode II and mixed mode I-II delamination of carbon fibre-reinforced polyamide composites 3D-printed by material extrusion
|
|
Composites Part A …,
2023 |
|
|
|
[80]
|
Carbon Fiber 3D Printing: Technologies and Performance—A Brief Review
|
|
Materials,
2023 |
|
|
|
[81]
|
Impact Strength for 3D-Printed PA6 Polymer Composites under Temperature Changes
|
|
Rodríguez, AD Pertuz-Comas… - … of Manufacturing and …,
2023 |
|
|
|
[82]
|
Two‐scale elastic property prediction of 3D printed continuous carbon fiber reinforced thermoplastic composite based on micro‐computed tomography
|
|
Polymer Composites,
2023 |
|
|
|
[83]
|
Effect of carbon fiber reinforcement on dimensional variations of 3D printed polyamide-6 composites: A simulation study
|
|
Turkish Journal of …,
2023 |
|
|
|
[84]
|
Carbon-Fiber-and Nanodiamond-Reinforced PLA Hierarchical 3D-Printed Core Sandwich Structures
|
|
Journal of Composites Science,
2023 |
|
|
|
[85]
|
Investigations into flexural behavior of additively manufactured short and continuous fiber CFRP composites
|
|
Journal of the Brazilian Society of Mechanical …,
2023 |
|
|
|
[86]
|
Z-direction performance and failure behavior of 3D printed continuous fiber reinforced composites with sinusoidal structure
|
|
Composites Science and …,
2023 |
|
|
|
[87]
|
Field assisted additive manufacturing for polymers and metals: materials and methods
|
|
Virtual and Physical …,
2023 |
|
|
|
[88]
|
DcAFF (Discontinuous Aligned Fibre Filament)–Mechanical properties investigation on multilayer 3D printed parts
|
|
Borges, KM Ball… - Composites Part B …,
2023 |
|
|
|
[89]
|
Study of the mechanical properties of 3D-printed onyx parts: investigation on printing parameters and effect of humidity
|
|
Chinese Journal of Mechanical …,
2023 |
|
|
|
[90]
|
Manufacturing technologies of polymer composites—A Review
|
|
Polymers,
2023 |
|
|
|
[91]
|
Additive manufacturing of PEEK-based continuous fiber reinforced thermoplastic composites with high mechanical properties
|
|
Composites Part A …,
2023 |
|
|
|
[92]
|
Fabrication and analysis of micro carbon fiber filled nylon filament reinforced with Kevlar, Fiberglass, and HSHT Fiberglass using dual extrusion system
|
|
Materials Today …,
2023 |
|
|
|
[93]
|
Advances in hybrid fibers reinforced polymer-based composites prepared by FDM: a review on mechanical properties and prospects
|
|
Composites …,
2023 |
|
|
|
[94]
|
Polyurethane with nano‐SiO2 based surface sizing method for 3D printed carbon fiber reinforced nylon 6 composites
|
|
Polymer Composites,
2023 |
|
|
|
[95]
|
Additive Manufacturing of Fiber Reinforced Composite: Material, Methods Challenges and Future Works
|
|
Recent Advancements in …,
2023 |
|
|
|
[96]
|
Achieving Optimal Efficiency in Manufacturing through Reinforced PA 3D Printed Parts Generated by FDM Technology
|
|
Advanced …,
2023 |
|
|
|
[97]
|
Methodology to design and optimise dispersed continuous carbon fibre composites parts by fused filament fabrication
|
|
González… - Composites Part A …,
2023 |
|
|
|
[98]
|
Mechanical and energy absorption behaviors of 3D printed continuous carbon/Kevlar hybrid thread reinforced PLA composites
|
|
Composite …,
2023 |
|
|
|
[99]
|
In-situ damage self-monitoring of fiber-reinforced composite by integrating self-powered ZnO nanowires decorated carbon fabric
|
|
Composites Part B …,
2023 |
|
|
|
[100]
|
Numerical Modeling Based on Finite Element Analysis of 3D-Printed Wood-Polylactic Acid Composites: A Comparison with Experimental Data
|
|
Forests,
2023 |
|
|
|
[101]
|
A Voronoi diagram approach for detecting defects in 3D printed fiber-reinforced polymers from microscope images
|
|
Computational Visual Media,
2023 |
|
|
|
[102]
|
Pin-bearing mechanical behaviour of continuous reinforced Kevlar fibre composite fabricated via fused filament fabrication
|
|
Progress in Additive Manufacturing,
2022 |
|
|
|
[103]
|
Performance Study of 3D Printed Continuous Fiber-Reinforced Polymer Composites Using Taguchi Method
|
|
Journal of Materials Engineering and Performance,
2022 |
|
|
|
[104]
|
Digital Manufacture of a Continuous Fiber Reinforced Thermoplastic Matrix Truss Core Structural Panel Using Off-the-Tool Consolidation
|
|
Journal of Composites Science,
2022 |
|
|
|
[105]
|
Research on the Simulation Model of Continuous Fiber-Reinforced Composites Printing Track
|
|
Polymers,
2022 |
|
|
|
[106]
|
Continuous Fiber-Reinforced Material Extrusion with Hybrid Composites of Carbon and Aramid Fibers
|
|
Applied Sciences,
2022 |
|
|
|
[107]
|
Experimental Characterization and Analysis of the In-Plane Elastic Properties and Interlaminar Fracture Toughness of a 3D-Printed Continuous Carbon Fiber …
|
|
Polymers,
2022 |
|
|
|
[108]
|
Evaluation of the mechanical properties and performance cost of additively manufactured continuous glass and carbon fiber composites
|
|
… International Journal of …,
2022 |
|
|
|
[109]
|
Bending properties and failure behavior of 3D printed fiber reinforced resin T‐beam
|
|
Polymer …,
2022 |
|
|
|
[110]
|
An experimental and numerical investigation on mechanical properties of 3D printed continuous glass tow preg-reinforced composites
|
|
Rapid Prototyping Journal,
2022 |
|
|
|
[111]
|
Influence of void contour on the elastic behavior of parts produced by material extrusion
|
|
Additive Manufacturing,
2022 |
|
|
|
[112]
|
Strength and its Variability in 3D Printing of Polymer Composites with Continuous Fibers
|
|
Materials & Design,
2022 |
|
|
|
[113]
|
Effect of the nozzle temperature on the microstructure and interlaminar strength in 3D printing of carbon fiber/polyphenylene sulfide composites
|
|
Composites Part C: Open …,
2022 |
|
|
|
[114]
|
DLP-Based 3D Printing for Automated Precision Manufacturing
|
|
Mobile Information …,
2022 |
|
|
|
[115]
|
Manufacturing of Bromelain based PVA support structure for 3D printing
|
|
Materials Today …,
2022 |
|
|
|
[116]
|
A review on carbon fiber-reinforced hierarchical composites: mechanical performance, manufacturing process, structural applications and allied challenges
|
|
Carbon Letters,
2022 |
|
|
|
[117]
|
A DMA-Based Approach to Quality Evaluation of Digitally Manufactured Continuous Fiber-Reinforced Composites from Thermoplastic Commingled Tow
|
|
Journal of Composites Science,
2022 |
|
|
|
[118]
|
3D Printing of Continuous Fiber Reinforced Polymer Composites: Development, Application, and Prospective
|
|
Chinese Journal of …,
2022 |
|
|
|
[119]
|
Fibre reinforcement in fused filament fabrication and sustainability: a literature review and future research agenda
|
|
International Journal of Materials and …,
2022 |
|
|
|
[120]
|
Process Evaluation, Tensile Properties and Fatigue Resistance of Chopped and Continuous Fiber Reinforced Thermoplastic Composites by 3D Printing
|
|
Journal of Renewable …,
2022 |
|
|
|
[121]
|
Mechanical characterization of AISI 316L samples printed using material extrusion
|
|
Applied Sciences,
2022 |
|
|
|
[122]
|
Tensile and thermal properties of low-melt poly aryl ether ketone reinforced with continuous carbon fiber manufactured by robotic 3D printing
|
|
… International Journal of …,
2022 |
|
|
|
[123]
|
3D printing and epoxy-infusion treatment of curved continuous carbon fibre reinforced dual-polymer composites
|
|
Composites Part B …,
2022 |
|
|
|
[124]
|
Continuously Reinforced Polymeric Composite for Additive Manufacturing—Development and Efficiency Analysis
|
|
Polymers,
2022 |
|
|
|
[125]
|
Open Hole Tension of 3D Printed Aligned Discontinuous Composites
|
|
Materials,
2022 |
|
|
|
[126]
|
A new resonance-based design approach to reduce motor torque requirements in automated machinery
|
|
The International Journal …,
2022 |
|
|
|
[127]
|
Direct-write 3D printing of UV-curable composites with continuous carbon fiber
|
|
Journal of Composite …,
2022 |
|
|
|
[128]
|
A multiscale numerical homogenization-based method for the prediction of elastic properties of components produced with the fused deposition modelling …
|
|
Results in Engineering,
2022 |
|
|
|
[129]
|
Experimental investigations on thermal, flame retardant, and impact properties of additively manufactured continuous FRPC
|
|
Polymer Composites,
2022 |
|
|
|
[130]
|
Contributions of interfaces on the mechanical behavior of 3D printed continuous fiber reinforced composites
|
|
Construction and Building …,
2022 |
|
|
|
[131]
|
3D printing of continuous carbon fiber reinforced polyphenylene sulfide: Exploring printability and importance of fiber volume fraction
|
|
Additive …,
2022 |
|
|
|
[132]
|
The essential work of fracture method for the characterisation of fusion bonding in 3D printed short carbon-fibre reinforced polyamide 6 thin films
|
|
Composites Science and Technology,
2022 |
|
|
|
[133]
|
3D printing of composite materials using ultralow-melt-viscosity polymer and continuous carbon fiber
|
|
Composites Part C: Open Access,
2022 |
|
|
|
[134]
|
Fabrication of continuous carbon fibre-reinforced polyetherimide through fused filament fabrication
|
|
Progress in Additive …,
2022 |
|
|
|
[135]
|
Lightweight design of automotive components using generative design with fiber-reinforced additive manufacturing
|
|
Procedia CIRP,
2022 |
|
|
|
[136]
|
Additive manufacturing with fibre-reinforcement–design guidelines and investigation into the influence of infill patterns
|
|
Rapid Prototyping Journal,
2022 |
|
|
|
[137]
|
Identification of Representative Equivalent Volumes on the Microstructure of 3D-Printed Fiber-Reinforced Thermoplastics Based on Statistical Characterization
|
|
Polymers,
2022 |
|
|
|
[138]
|
Innovation in Additive Manufacturing Using Polymers: A Survey on the Technological and Material Developments
|
|
Vallejos, FE Rodríguez-Umanzor… - Polymers,
2022 |
|
|
|
[139]
|
Experimental Characterization and Modeling of 3D Printed Continuous Carbon Fibers Composites with Different Fiber Orientation Produced by FFF Process
|
|
Polymers,
2022 |
|
|
|
[140]
|
Impact energy absorption and fracture mechanism of FFF made fiberglass reinforced polymer composites
|
|
Rapid Prototyping Journal,
2022 |
|
|
|
[141]
|
Finite element modelling of 3D printed continuous carbon fiber composites: Embedded elements technique and experimental validation
|
|
Composite Structures,
2022 |
|
|
|
[142]
|
Continuous Fiber-Reinforced Aramid/PETG 3D-Printed Composites with High Fiber Loading through Fused Filament Fabrication
|
|
Polymers,
2022 |
|
|
|
[143]
|
Continuous fibre composite 3D printing with pultruded carbon/PA6 commingled fibres: Processing and mechanical properties
|
|
Composites Science and Technology,
2022 |
|
|
|
[144]
|
3D-printed thermoplastic composite fasteners for single lap joint reinforcement
|
|
Composite …,
2022 |
|
|
|
[145]
|
Additively manufactured fiber-reinforced composites: a review of mechanical behavior and opportunities
|
|
Journal of Materials Science & …,
2022 |
|
|
|
[146]
|
Characterization of continuous carbon fibre reinforced 3D printed polymer composites with varying fibre volume fractions
|
|
Jones… - Composite …,
2022 |
|
|
|
[147]
|
Investigation of influence of printing parameters on the quality of 3D printed composite structures
|
|
Composite …,
2022 |
|
|
|
[148]
|
The influence of the humidity on the mechanical properties of 3D printed continuous flax fibre reinforced poly (lactic acid) composites
|
|
Scott, A Perriman,
2022 |
|
|
|
[149]
|
Novel designable strategy and multi-scale analysis of 3D printed thermoplastic fabric composites
|
|
Composites Science and Technology,
2022 |
|
|
|
[150]
|
3D‐Printed Anisotropic Polymer Materials for Functional Applications
|
|
Advanced …,
2022 |
|
|
|
[151]
|
Experimental study on interface failure behavior of 3D printed continuous fiber reinforced composites
|
|
Additive Manufacturing,
2022 |
|
|
|
[152]
|
Additive Manufacturing of Biomaterials—Design Principles and Their Implementation
|
|
Materials,
2022 |
|
|
|
[153]
|
Tensile properties of additively manufactured thermoplastic composites reinforced with chopped carbon fibre
|
|
Materials,
2022 |
|
|
|
[154]
|
Mechanical characterization of 3D printed continuous carbon fiber reinforced thermoplastic composites
|
|
Composites Science and Technology,
2022 |
|
|
|
[155]
|
In-nozzle impregnation of continuous textile flax fiber/polyamide 6 composite during FFF process
|
|
Composites Part A …,
2022 |
|
|
|
[156]
|
3D-Printed Fiber-Reinforced Polymer Composites by Fused Deposition Modelling (FDM): Fiber Length and Fiber Implementation Techniques
|
|
Polymers,
2022 |
|
|
|
[157]
|
Impact behaviour and non destructive evaluation of 3D printed reinforced composites
|
|
Composite Structures,
2022 |
|
|
|
[158]
|
Application of digital image correlation in behavior modelling of AM CFRTP composites
|
|
Engineering Failure Analysis,
2022 |
|
|
|
[159]
|
Interfacial behaviors of continuous carbon fiber reinforced polymers manufactured by fused filament fabrication: A review and prospect
|
|
International Journal of …,
2022 |
|
|
|
[160]
|
Compression and Bending Properties of Short Carbon Fiber Reinforced Polymers Sandwich Structures Produced via Fused Filament Fabrication Process
|
|
Polymers,
2022 |
|
|
|
[161]
|
Stress-adapted fiber orientation along the principal stress directions for continuous fiber-reinforced material extrusion
|
|
Progress in Additive …,
2022 |
|
|
|
[162]
|
Investigation on the mechanical properties of 3D printed hybrid continuous fiber-filled composite considering influence of interfaces
|
|
The International Journal …,
2022 |
|
|
|
[163]
|
Comparison of Models to Predict Mechanical Properties of FR-AM Composites and a Fractographical Study
|
|
Becerra, OA González-Estrada… - Polymers,
2022 |
|
|
|
[164]
|
Tensile Strength Enhancement of Fused Filament Fabrication Printed Parts: A Review of Process Improvement Approaches and Respective Impact
|
|
Additive Manufacturing,
2022 |
|
|
|
[165]
|
Fused Deposition Modeling as a Secondary Recycling Process for the Preparation of Sustainable Structures
|
|
Additive Manufacturing for Plastic …,
2022 |
|
|
|
[166]
|
3D Creative Design of Cheetah Running Form
|
|
2021 International conference on Smart Technologies …,
2022 |
|
|
|
[167]
|
Multiscale modelling of additively manufactured composite material behaviour
|
|
2022 |
|
|
|
[168]
|
Study on the formability of SiCf/Ti-6Al-4V composites by fiber laying parameters and laser process parameters
|
|
2022 |
|
|
|
[169]
|
Postprocessing and simulation methods for additively manufactured continuous fibre reinforced plastics
|
|
2022 |
|
|
|
[170]
|
Pellets Biocompósitos Para Impressão 3D Através de Extrusão Direta| Biocomposite Pellets For Direct Extrusion-Based 3D Printing
|
|
2022 |
|
|
|
[171]
|
Characterization of 3D-printed laminate composites with enhanced mechanical properties
|
|
2022 |
|
|
|
[172]
|
3D printed FDM composites: fabrication, microstructure and properties
|
|
2022 |
|
|
|
[173]
|
The Effect of Process Settings and Materials Properties on Mechanical Properties of 3D Printed Structures
|
|
3rd Int. Conference on Applied Research in …,
2022 |
|
|
|
[174]
|
Metal Additive Manufacturing: Materials, Methods, Microstructure Evolution and Mechanical Properties via Post-processing Heat Treatments
|
|
… for Energy Conversion …,
2022 |
|
|
|
[175]
|
Effect of fiber-layer positions on mechanical properties of carbon fiber reinforced materials manufactured by fused deposition modeling
|
|
Materiali in tehnologije,
2022 |
|
|
|
[176]
|
Effect of Printing Direction on the Elastic Properties of 3D-Printed Nylon Materials
|
|
Physical Sciences Forum,
2022 |
|
|
|
[177]
|
Design and analysis of fiber placement for composite conical shell
|
|
Journal of Mechanical Science and Technology,
2022 |
|
|
|
[178]
|
Empirical Study for 3D-Printed Robot Design: Dimensional Accuracy of a Hole and Proposal of a New Shaft-Fastening Method
|
|
2022 IEEE/SICE …,
2022 |
|
|
|
[179]
|
Additive Manufacturing of Biomaterials—Design Principles and Their Implementation. Materials 2022, 15, 5457
|
|
2022 |
|
|
|
[180]
|
Additive manufacturing of high density carbon fibre reinforced polymer composites
|
|
Additive Manufacturing,
2022 |
|
|
|
[181]
|
Fused Deposition Modeling of Composite Materials
|
|
2022 |
|
|
|
[182]
|
3D-Printed Fiber-Reinforced Polymer Composites by Fused Deposition Modelling (FDM): Fiber Length and Fiber Implementation Techniques. Polymers …
|
|
2022 |
|
|
|
[183]
|
Μελέτη και ανάπτυξη κατασκευών μέσω της διαδικασίας της προσθετικής κατασκευής (Additive Manufacturing)
|
|
2022 |
|
|
|
[184]
|
Continuous fibre reinforced Vat photopolymerisation (CONFIB-VAT)
|
|
Additive Manufacturing,
2022 |
|
|
|
[185]
|
DLP‐based 3D printing for automated precision manufacturing
|
|
Mobile information …,
2022 |
|
|
|
[186]
|
Ultrasonic fatigue analysis of 3D-printed carbon fiber reinforced plastic
|
|
Heliyon,
2022 |
|
|
|
[187]
|
3D-Printed Fiber-Reinforced Polymer Composites by Fused Deposition Modelling (FDM): Fiber Length and Fiber Implementation Techniques, Polymers, 2022 …
|
|
DOI: https://doi. org/10.3390 …,
2022 |
|
|
|
[188]
|
Production of Continuous Fiberglass Reinforced UV-Curable Polymer Matrix Composite Material with 90 Degree Elbow Products by Robotic Additive Manufacturing
|
|
2022 |
|
|
|
[189]
|
基于蜻蜓翅脉结构的连续碳纤维增强树脂基复合材料仿生设计与增材制造
|
|
化工进展,
2022 |
|
|
|
[190]
|
The emerging frontiers in materials for functional three-dimensional printing
|
|
Digital …,
2022 |
|
|
|
[191]
|
3-D Printing In Pharmaceutical Field: A Review
|
|
NeuroQuantology,
2022 |
|
|
|
[192]
|
A 3D Printing on Engineering and Medical Field
|
|
2022 |
|
|
|
[193]
|
Development of fibre-reinforced polymer composites through direct digital manufacturing
|
|
Composites Assembly for High Performance Fastener …,
2022 |
|
|
|
[194]
|
3D 프린팅 산업 활성화 방안 연구
|
|
2021 |
|
|
|
[195]
|
Caratterizzazione e modellazione numerica di materiale compositi prodotti mediante tecnologia di Additive Manufacturing= Characterization and numerical modeling …
|
|
2021 |
|
|
|
[196]
|
Development of a low-cost automated in-situ consolidation process for self-reinforced polypropylene composites
|
|
2021 |
|
|
|
[197]
|
3D Printing of Living and Synthetic Fiber-Based Materials
|
|
2021 |
|
|
|
[198]
|
Investigation of additive manufacturing technology for in-situ reinforcement of polyetherimide with continuous carbon fibres
|
|
2021 |
|
|
|
[199]
|
Scalable geometric processing techniques with applications in characterizing additively manufactured composites
|
|
Li, X.(2021). Scalable geometric processing techniques …,
2021 |
|
|
|
[200]
|
Interfacial Transcrystallization and Mechanical Performance of 3D-Printed Fully Recyclable Continuous Fiber Self-Reinforced Composites. Polymers 2021, 13 …
|
|
2021 |
|
|
|
[201]
|
3D printing composite materials: A comprehensive review
|
|
Composite Materials,
2021 |
|
|
|
[202]
|
Experimental investigation of additive manufacturing of continuous carbon fiber composites with multifunctional electro-tensile properties
|
|
Materials,
2021 |
|
|
|
[203]
|
3D printing of multidirectional composite materials reinforced with continuous fibres: impact damage behaviour
|
|
Revista de Materiales …,
2021 |
|
|
|
[204]
|
ОЦЕНКА ОСТАТОЧНОЙ ДЛИНЫ ДИСКРЕТНЫХ УГЛЕВОЛОКОН В КОМПОЗИТАХ НА ОСНОВЕ ПЭИ ДЛЯ 3D-ПЕЧАТИ
|
|
Новые полимерные …,
2021 |
|
|
|
[205]
|
A Periodic Homogenization Model Including Porosity to Predict Elastic Properties of 3D-Printed Continuous Carbon Fiber-Reinforced Composites
|
|
2021 International …,
2021 |
|
|
|
[206]
|
Preparation of Continuous Glass Fiber Reinforced Polylactic Acid by Means of a Melt Impregnation Method and Application as a 3D Printing Consumable
|
|
ChemistrySelect,
2021 |
|
|
|
[207]
|
3D printed degradable stents with controlled drug delivery capabilities
|
|
2021 |
|
|
|
[208]
|
Study of the Residual Length of Discrete Carbon Fibers in Polyetherimide Based Composites for 3D-Printing
|
|
Key Engineering …,
2021 |
|
|
|
[209]
|
Etude de la rhéologie des composites polymères au cours du procédé FDM (Fabrication additive)
|
|
2021 |
|
|
|
[210]
|
IN-SITU IMPREGNATION BY FFF PROCESS OF CONTINIOUS TEXTILE FLAX/PA6 COMPOSITES
|
|
2021 |
|
|
|
[211]
|
Untersuchung der intra-und interlaminaren mechanischen Eigenschaften von faserverstärkten und flammgeschützten Polyamiden im Kontext der …
|
|
2021 |
|
|
|
[212]
|
增材制造连续碳纤维增强金属基复合材料性能
|
|
化工进展,
2021 |
|
|
|
[213]
|
同心円形状曲繊維 CFRP を伝搬する弾性波の 3 次元挙動に関する相似則
|
|
日本複合材料学会誌,
2021 |
|
|
|
[214]
|
Desenvolvimento e Caracterização de Compósitos Verdes para Habitações Sociais
|
|
2021 |
|
|
|
[215]
|
EXPERIMENTAL INVESTIGATION ON SPECIMENS MAKING AND ANALYSIS OF THE MECHANICAL PROPERTIES OF THE ANTIBACTERIAL PLA …
|
|
INTERNATIONAL JOURNAL,
2021 |
|
|
|
[216]
|
Design, Analysis and Experimental Evaluation of 3D Printed Variable Stiffness Structures
|
|
2021 |
|
|
|
[217]
|
Impregnation modeling and preparation optimization of continuous glass fiber reinforced polylactic acid filament for 3D printing
|
|
Polymer Composites,
2021 |
|
|
|
[218]
|
Multi-scale analysis for 3D printed continuous fiber reinforced thermoplastic composites
|
|
Composites Science and Technology,
2021 |
|
|
|
[219]
|
Interfacial transcrystallization and mechanical performance of 3D-Printed fully recyclable continuous fiber self-reinforced composites
|
|
Polymers,
2021 |
|
|
|
[220]
|
Analytical and numerical modeling of voids in additively manufactured thermoplastic parts
|
|
Additive Manufacturing,
2021 |
|
|
|
[221]
|
Additive manufacturing technology of polymeric materials for customized products: recent developments and future prospective
|
|
RSC advances,
2021 |
|
|
|
[222]
|
Spin‐Printing of Liquid Crystal Polymer into Recyclable and Strong All‐Fiber Materials
|
|
Advanced Functional …,
2021 |
|
|
|
[223]
|
Additive manufacturing of structural materials
|
|
Materials Science and …,
2021 |
|
|
|
[224]
|
Direct writing of continuous carbon fibers/epoxy thermoset composites with high-strength and low energy-consumption
|
|
Additive …,
2021 |
|
|
|
[225]
|
Intrinsic Field-Induced Nanoparticle Assembly in Three-Dimensional (3D) Printing Polymeric Composites
|
|
… Applied Materials & …,
2021 |
|
|
|
[226]
|
A Comparative Study of the Mechanical Properties of FDM 3D Prints Made of PLA and Carbon Fiber-Reinforced PLA for Thin-Walled Applications
|
|
Materials,
2021 |
|
|
|
[227]
|
Batch production and fused filament fabrication of highly aligned discontinuous fibre thermoplastic filaments
|
|
Additive …,
2021 |
|
|
|
[228]
|
Additive manufacturing of polymer-based composites using fused filament fabrication (FFF): a review
|
|
Applied Composite …,
2021 |
|
|
|
[229]
|
纤维增强聚合物基复合材料熔融堆积成型技术的研究进展及产品的力学性能
|
|
2021 |
|
|
|
[230]
|
Assessing the effect of FDM processing parameters on mechanical properties of PLA parts using Taguchi method
|
|
Journal of Thermoplastic …,
2021 |
|
|
|
[231]
|
Testing method for evaluating mechanical properties of 3D printed CFRP with curved fibers by four-point bending test of L-shaped specimen
|
|
Composites Part C …,
2021 |
|
|
|
[232]
|
Study on mechanical performance of 3D printed composite material with topology shape using finite element method
|
|
Functional Composites and Structures,
2021 |
|
|
|
[233]
|
Geometrical Scaling Effects in the Mechanical Properties of 3D-Printed Body-Centered Cubic (BCC) Lattice Structures
|
|
Polymers,
2021 |
|
|
|
[234]
|
3D 打印连续纤维增强复合材料研究现状综述
|
|
航空学报,
2021 |
|
|
|
[235]
|
Micromechanical models for predicting the mechanical properties of 3D-printed wood/PLA composite materials: A comparison with experimental data
|
|
Mechanics of …,
2021 |
|
|
|
[236]
|
Rotating Bending Fatigue Analysis of Printed Specimens from Assorted Polymer Materials
|
|
2021 |
|
|
|
[237]
|
Bioactive materials for 3D printing: A review
|
|
2021 |
|
|
|
[238]
|
Effect of fibre arrangements on tensile properties of 3D printed continuous fibre-reinforced thermoplastic composites
|
|
2021 |
|
|
|
[239]
|
3D printed fibre-reinforced polymer composites—Review of the fused deposition modeling process and mechanical performance of products
|
|
2021 |
|
|
|
[240]
|
Annealing of chopped and continuous fibre reinforced polyamide 6 produced by fused filament fabrication
|
|
2021 |
|
|
|
[241]
|
Optimization of printing parameters of 3D-printed continuous glass fiber reinforced polylactic acid composites
|
|
2021 |
|
|
|
[242]
|
Thermotropic liquid crystalline polymer reinforced polypropylene composites enhanced with carbon nanotubes for use in fused filament fabrication
|
|
2021 |
|
|
|
[243]
|
Numerical modelling of the elastic properties of 3D-printed specimens of thermoplastic matrix reinforced with continuous fibres
|
|
2021 |
|
|
|
[244]
|
Geometric Accuracy and Mechanical Behavior of Polymer-Based Composite Curved Tubes produced by Fused Filament Fabrication (FFF)
|
|
2021 |
|
|
|
[245]
|
A review of the mechanical properties of additively manufactured fiber reinforced composites
|
|
2021 |
|
|
|
[246]
|
3D printing of continuous fiber-reinforced thermoset composites
|
|
2021 |
|
|
|
[247]
|
The Mechanical Performance of the 3D Printed Composites Produced with Continuous Carbon Fiber Reinforced Filaments Obtained via Melt Impregnation
|
|
2021 |
|
|
|
[248]
|
A Review on Filament Materials for Fused Filament Fabrication
|
|
2021 |
|
|
|
[249]
|
Experimental Analysis of Impact Resistance of 3D Polycarbonate and Nylon+ Carbon Fiber Specimens
|
|
2021 |
|
|
|
[250]
|
Material extrusion additive manufacturing of continuous fibre reinforced polymer matrix composites: A review and outlook
|
|
2021 |
|
|
|
[251]
|
An Experimental Study on Mechanical, Thermal and Flame-Retardant Properties of 3D-Printed Glass-Fiber-Reinforced Polymer Composites
|
|
2021 |
|
|
|
[252]
|
Mechanical and Tribological Characteristics of Polymer Composites Developed by Fused Filament Fabrication
|
|
Fused Deposition Modeling Based 3D Printing,
2021 |
|
|
|
[253]
|
3d Printing: Basic principles and applications
|
|
2021 |
|
|
|
[254]
|
Interfacial adhesion quality in 3D printed continuous CF/PA6 composites at filament/matrix and interlaminar scales
|
|
2021 |
|
|
|
[255]
|
3D printed carbon fiber reinforced thermoplastic composites: A review
|
|
2021 |
|
|
|
[256]
|
Construction of a Low-Cost Semi-automatic Machine for Tensile Testing
|
|
2021 |
|
|
|
[257]
|
Tensile Performance of 3D-Printed Continuous Fiber-Reinforced Nylon Composites
|
|
2021 |
|
|
|
[258]
|
Reinforcing in the lay-up direction with self-heating for carbon fiber composites fabricated using a fused filament fabrication 3D printer
|
|
2021 |
|
|
|
[259]
|
Mechanism based failure of 3D-printed continuous carbon fiber reinforced thermoplastic composites
|
|
2021 |
|
|
|
[260]
|
3D printed recoverable honeycomb composites reinforced by continuous carbon fibers
|
|
2021 |
|
|
|
[261]
|
Generation of nylon copolymer reinforced with carbon nanotubes and thermotropic liquid crystalline polymers for use in fused filament fabrication
|
|
Polymer Composites,
2021 |
|
|
|
[262]
|
Carbon-fiber reinforced polymer composites: A comparison of manufacturing methods on mechanical properties
|
|
2021 |
|
|
|
[263]
|
A novel printing strategy in additive manufacturing of continuous carbon fiber reinforced plastic composites
|
|
2021 |
|
|
|
[264]
|
Evaluation of Technologies for the Fabrication of Continuous Fiber Reinforced Thermoplastic Parts by Fused Layer Modeling
|
|
2021 |
|
|
|
[265]
|
Development and Processing of Continuous Flax and Carbon Fiber-Reinforced Thermoplastic Composites by a Modified Material Extrusion Process
|
|
2021 |
|
|
|
[266]
|
Calculating printing speed in order to correctly print PLA/continuous glass fiber composites via fused filament fabrication 3D printer
|
|
2021 |
|
|
|
[267]
|
Effect of build-up orientations and process parameters on the tensile strength of 3D printed short carbon fiber/PA-6 composites
|
|
2021 |
|
|
|
[268]
|
3D printing of a continuous fiber-reinforced composite based on a coaxial Kevlar/PLA filament
|
|
2021 |
|
|
|
[269]
|
Process evaluation, tensile properties, mathematical models, and fracture behavior of 3D printed continuous fiber reinforced thermoplastic composites
|
|
2021 |
|
|
|
[270]
|
Influence of Process Parameters on the Properties of Additively Manufactured Fiber-Reinforced Polymer Composite Materials: A Review
|
|
2021 |
|
|
|
[271]
|
An isogeometric framework for the modeling of curvilinear anisotropic media
|
|
2021 |
|
|
|
[272]
|
Leveraging the Advantages of Additive Manufacturing to Produce Advanced Hybrid Composite Structures for Marine Energy Systems
|
|
2021 |
|
|
|
[273]
|
Advanced Configuration Parameters of Post Processor Influencing Tensile Testing PLA and Add-Mixtures in Polymer Matrix in the Process of FDM Technology
|
|
2021 |
|
|
|
[274]
|
Review of mechanical properties of and optimisation methods for continuous fibre-reinforced thermoplastic parts manufactured by fused deposition modelling
|
|
2021 |
|
|
|
[275]
|
A finite element approach for the prediction of the mechanical behaviour of layered composites produced by Continuous Filament Fabrication (CFF)
|
|
2021 |
|
|
|
[276]
|
3D Printing‐Enabled Nanoparticle Alignment: A Review of Mechanisms and Applications
|
|
2021 |
|
|
|
[277]
|
Analysis of the Influencing Factors of FDM-Supported Positions for the Compressive Strength of Printing Components
|
|
2021 |
|
|
|
[278]
|
3D printing of Continuous Fiber Reinforced Composites: A Review of the Processing, Pre-and Post-Processing Effects on Mechanical Properties
|
|
2021 |
|
|
|
[279]
|
Linear translaminar fracture characterization of additive manufactured continuous carbon fiber reinforced thermoplastic
|
|
2021 |
|
|
|
[280]
|
Longitudinal compression failure of 3D printed continuous carbon fiber reinforced composites: An experimental and computational study
|
|
2021 |
|
|
|
[281]
|
Three-dimensional similarity law for elastic wave propagation in CFRP with concentrically curved fibers
|
|
2021 |
|
|
|
[282]
|
Fracture Toughness of Three-Dimensional Stereolithography Printed Polymer Reinforced with Continuous Carbon Fibers
|
|
2021 |
|
|
|
[283]
|
Post-processing effects on microstructure, interlaminar and thermal properties of 3D printed continuous carbon fibre composites
|
|
2021 |
|
|
|
[284]
|
Predication of the in-plane mechanical properties of continuous carbon fibre reinforced 3D printed polymer composites using classical laminated-plate theory
|
|
2021 |
|
|
|
[285]
|
Compressive strength degradation of the curved sections of 3D-printed continuous carbon fiber composite
|
|
2021 |
|
|
|
[286]
|
Investigating the fatigue and mechanical behaviour of 3D printed woven and nonwoven continuous carbon fibre reinforced polymer (CFRP) composites
|
|
2021 |
|
|
|
[287]
|
Charpy impact energy absorption of 3D printed continuous Kevlar reinforced composites
|
|
2021 |
|
|
|
[288]
|
Progress in MgCl 2 supported Ziegler-Natta catalyzed polyolefin products and applications
|
|
2021 |
|
|
|
[289]
|
Mechanical properties for long fibre reinforced fused deposition manufactured composites
|
|
2021 |
|
|
|
[290]
|
Kompozit eklemeli imalat için polimer matrisli sürekli fiber takviyeli kompozit parça üretilebilirliğinin araştırılması.
|
|
2021 |
|
|
|
[291]
|
Kompozit eklemeli imalat için polimer matrisli sürekli fiber takviyeli kompozit parça üretilebilirliğinin araştırılması
|
|
Gazi üniversitesi Mühendislik Mimarl?k Fakültesi Dergisi,
2021 |
|
|
|
[292]
|
Fused deposition modelling of fibre reinforced polymer composites: a parametric review
|
|
2021 |
|
|
|
[293]
|
VOLCO-X: Numerical simulation of material distribution and voids in extrusion additive manufacturing
|
|
2021 |
|
|
|
[294]
|
Thermotropic liquid crystalline polymer reinforced polyamide composite for fused filament fabrication
|
|
2021 |
|
|
|
[295]
|
Mechanical characterization of additively manufactured fiber-reinforced composites
|
|
2021 |
|
|
|
[296]
|
Experimental investigation and statistical analysis of additively manufactured onyx‐carbon fiber reinforced composites
|
|
2021 |
|
|
|
[297]
|
3D-printed resistive carbon-fiber-reinforced sensors for monitoring the resin frontal flow during composite manufacturing
|
|
2021 |
|
|
|
[298]
|
Simultaneous reinforcement of both rigidity and energy absorption of polyamide-based composites with hybrid continuous fibers by 3D printing
|
|
2021 |
|
|
|
[299]
|
Investigation of polymer matrix continuous fiber reinforced composite part manufacturability for composite additive manufacturing
|
|
2021 |
|
|
|
[300]
|
3D Printing Applications for Radiology: An Overview
|
|
2021 |
|
|
|
[301]
|
The technology of continuous fibre-reinforced polymers: a review on extrusion additive manufacturing methods
|
|
2021 |
|
|
|
[302]
|
Linear model analysis of fused deposition modeling process parameters for obtaining the maximum tensile strength in acrylonitrile butadiene styrene (ABS) and …
|
|
2021 |
|
|
|
[303]
|
Additive Fertigung kontinuierlich faserverstärkter Thermoplaste mittels 3D-Extrusion
|
|
2020 |
|
|
|
[304]
|
Reverse piezo-resistivity of 3D printed continuous carbon fiber/PA6 composites in a low stress range
|
|
2020 |
|
|
|
[305]
|
A review study on mechanical properties of obtained products by FDM method and metal/polymer composite filament production
|
|
2020 |
|
|
|
[306]
|
Mechanical and thermal analyses of automotive components manufactured with 3D printed continuous fiber reinforced thermoplastic polymers
|
|
2020 |
|
|
|
[307]
|
3D 打印连续纤维增强聚酰胺复合材料机械性能研究.
|
|
2020 |
|
|
|
[308]
|
Diverse Applications of Inorganic Fillers in Additive Manufacturing of Functional Materials
|
|
2020 |
|
|
|
[309]
|
Mechanical Performance of Long-bre Reinforced Polymer Composites by 3D Printing
|
|
2020 |
|
|
|
[310]
|
Fatigue Analysis of Additive Manufactured Long Fibre Reinforced Nylon Materials
|
|
2020 |
|
|
|
[311]
|
Micromechanical analysis of the tensile deformation behavior for 3D printed unidirectional continuous fiber reinforced thermos-plastic composites
|
|
2020 |
|
|
|
[312]
|
3D Printing of Polylactic Acid Bioplastic–Carbon Fibres and Twisted Kevlar Composites Through Coextrusion Using Fused Deposition Modeling
|
|
2020 |
|
|
|
[313]
|
3D and 4D printing of high performance continuous synthetic and natural fibre composites for structural and morphing applications
|
|
2020 |
|
|
|
[314]
|
Additive Manufacturing of Continuous Carbon Fiber Reinforced Thermoplastic Composites: An Investigation on Process-Impregnation-Property Relationship
|
|
2020 |
|
|
|
[315]
|
A new additive manufacturing technique for layered metal-composite hybrid structures
|
|
2020 |
|
|
|
[316]
|
The Mechanical Properties of Fiber Metal Laminates Based on 3D Printed Composites
|
|
2020 |
|
|
|
[317]
|
Long-fibre Reinforced Polymer Composites by 3D Printing: Influence of Nature of Reinforcement and Processing Parameters on Mechanical Performance
|
|
2020 |
|
|
|
[318]
|
Properties investigation of 3D printed continuous pineapple leaf fiber-reinforced PLA composite
|
|
2020 |
|
|
|
[319]
|
Fiber-matrix Impregnation Behavior during Additive Manufacturing of Continuous Carbon Fiber Reinforced Polylactic Acid Composites
|
|
2020 |
|
|
|
[320]
|
Composite Reinforcement Architectures: A Review of Field-Assisted Additive Manufacturing for Polymers
|
|
2020 |
|
|
|
[321]
|
Technologies in additive manufacturing for fiber reinforced composite materials: a review
|
|
2020 |
|
|
|
[322]
|
Investigation on process parameters of 3D printed continuous carbon fiber-reinforced thermosetting epoxy composites
|
|
2020 |
|
|
|
[323]
|
Fabrication of continuous glass fiber-reinforced dual-cure epoxy composites via UV-assisted fused deposition modeling
|
|
2020 |
|
|
|
[324]
|
Process-structure-property of additively manufactured continuous carbon fiber reinforced thermoplastic: an investigation of mode I interlaminar fracture toughness
|
|
2020 |
|
|
|
[325]
|
Hybrid Manufacturing and Mechanical Characterization of Cu/PLA Composites
|
|
2020 |
|
|
|
[326]
|
Strength and Hardness of 3D Printed Poly Lactic Acid and Carbon Fiber Poly Lactic Acid Thermoplastics
|
|
2020 |
|
|
|
[327]
|
Similarity law for two-dimensional propagation behavior of ultrasonic wave in concentrically curved fiber CFRP
|
|
2020 |
|
|
|
[328]
|
FDM-based 3D printing of polymer and associated composite: A review on mechanical properties, defects and treatments
|
|
2020 |
|
|
|
[329]
|
Recent progress on polymer materials for additive manufacturing
|
|
2020 |
|
|
|
[330]
|
Mechanical and Thermo-mechanical Properties of Carbon fiber Reinforced Thermoplastic Composite Fabricated Using Fused Deposition Modeling Method
|
|
2020 |
|
|
|
[331]
|
A review of 3D and 4D printing of natural fibre biocomposites
|
|
2020 |
|
|
|
[332]
|
3D-printed carbon fiber reinforced polymer composites: a systematic review
|
|
2020 |
|
|
|
[333]
|
Additive manufacturing of short fiber reinforced thermoset composites with unprecedented mechanical performance
|
|
2020 |
|
|
|
[334]
|
Multi‐Material 3D and 4D Printing: A Survey
|
|
2020 |
|
|
|
[335]
|
An approach to analyse the factors behind the micromechanical response of 3D-printed composites
|
|
2020 |
|
|
|
[336]
|
Review on process model, structure-property relationship of composites and future needs in fused filament fabrication
|
|
2020 |
|
|
|
[337]
|
Investigation of the tensile properties in fibre-reinforced additive manufacturing and fused filament fabrication
|
|
2020 |
|
|
|
[338]
|
Optimal design and manufacture of variable stiffness laminated continuous fiber reinforced composites
|
|
2020 |
|
|
|
[339]
|
A mechanistic model for tensile property of continuous carbon fiber reinforced plastic composites built by fused filament fabrication
|
|
2020 |
|
|
|
[340]
|
Investigation of the Mechanical Properties of a Carbon Fibre-Reinforced Nylon Filament for 3D Printing
|
|
2020 |
|
|
|
[341]
|
A multi-scale analytical methodology for the prediction of mechanical properties of 3D-printed materials with continuous fibres
|
|
2020 |
|
|
|
[342]
|
Progressive damage simulation for a 3D-printed curvilinear continuous carbon fiber-reinforced thermoplastic based on continuum damage mechanics
|
|
2020 |
|
|
|
[343]
|
Some Investigations on the Tensile Strength of Additively Manufactured Polylactic Acid Components
|
|
2020 |
|
|
|
[344]
|
Moisture effect on the mechanical properties of additively manufactured continuous carbon fiber‐reinforced Nylon‐based thermoplastic
|
|
2020 |
|
|
|
[345]
|
Design, Analysis and Development of composite matrix material upright of FSAE vehicle
|
|
2020 |
|
|
|
[346]
|
Investigating the Hot Isostatic Pressing of an Additively Manufactured Continuous Carbon Fiber Reinforced PEEK Composite
|
|
2020 |
|
|
|
[347]
|
Investigation on mechanical performance of 3D printed carbon and glass fiber reinforced polylactic acid laminates
|
|
2020 |
|
|
|
[348]
|
Determining process-window for manufacturing of continuous carbon fiber-reinforced composite Using 3D-printing
|
|
2020 |
|
|
|
[349]
|
State-of-the-Art Review and Roadmap
|
|
2020 |
|
|
|
[350]
|
Calculating Printing Speed for Polylactic Acid/Continuous Glass Fiber Composites via Fused Filament Fabrication
|
|
2020 |
|
|
|
[351]
|
A novel use of twisted continuous carbon fibers in additive manufacturing of composites
|
|
2020 |
|
|
|
[352]
|
Tailoring the mechanical properties of 3D-printed continuous flax/PLA biocomposites by controlling the slicing parameters
|
|
2020 |
|
|
|
[353]
|
Tensile performance of additively manufactured short carbon fibre-PLA composites: neural networking and GA for prediction and optimisation
|
|
2020 |
|
|
|
[354]
|
Expanding Puck and Schürmann Inter Fiber Fracture Criterion for Fiber Reinforced Thermoplastic 3D-Printed Composite Materials
|
|
2020 |
|
|
|
[355]
|
A novel generalized stress invariant-based strength model for inter-layer failure of FFF 3D printing PLA material
|
|
2020 |
|
|
|
[356]
|
Evaluating the effect of variable fiber content on mechanical properties of additively manufactured continuous carbon fiber composites
|
|
2020 |
|
|
|
[357]
|
The Use of Composite Materials in 3D Printing
|
|
2020 |
|
|
|
[358]
|
3D printed continuous CF/PA6 composites: Effect of microscopic voids on mechanical performance
|
|
2020 |
|
|
|
[359]
|
3D Printing of Fibre-Reinforced Thermoplastic Composites Using Fused Filament Fabrication—A Review
|
|
2020 |
|
|
|
[360]
|
Smart Manufacturing Process of Carbon-Based Low-Dimensional Structures and Fiber-Reinforced Polymer Composites for Engineering Applications
|
|
2020 |
|
|
|
[361]
|
Open hole tensile testing of 3D printed continuous carbon fiber reinforced composites
|
|
2020 |
|
|
|
[362]
|
Effect of Process Parameters on Tensile Mechanical Properties of 3D Printing Continuous Carbon Fiber-Reinforced PLA Composites
|
|
2020 |
|
|
|
[363]
|
Daño en partes de manufactura aditiva reforzadas por fibras continuas
|
|
2020 |
|
|
|
[364]
|
REPORT: Investigation on Curvilinear Anisotropy via Isogeometric Analysis (IGA)
|
|
2020 |
|
|
|
[365]
|
The mechanical testing and performance analysis of polymer-fibre composites prepared through the additive manufacturing
|
|
2020 |
|
|
|
[366]
|
FUSION BONDING OF FIBER REINFORCED SEMI-CRYSTALLINE POLYMERS IN EXTRUSION DEPOSITION ADDITIVE MANUFACTURING
|
|
2020 |
|
|
|
[367]
|
Property Enhancement of Carbon Fiber-Reinforced Polylactic Acid Composites Prepared by Fused-Deposition Modeling
|
|
2020 |
|
|
|
[368]
|
Fatigue in Continuous Fibre Reinforced Thermoplastic Composites
|
|
2020 |
|
|
|
[369]
|
Static and fatigue behaviour of continuous fibre reinforced thermoplastic composites manufactured by fused deposition modelling technique
|
|
2020 |
|
|
|
[370]
|
3D printed PCL scaffold reinforced with continuous biodegradable fiber yarn: A study on mechanical and cell viability properties
|
|
2020 |
|
|
|
[371]
|
Enhancing the mechanical performance of 3D‐printed basalt fiber‐reinforced composites using in‐line atmospheric plasma pretreatments
|
|
2020 |
|
|
|
[372]
|
Enhanced mechanical properties of 3D printed graphene-polymer composite lattices at very low graphene concentrations
|
|
2020 |
|
|
|
[373]
|
3D printing of optimized composites with variable fiber volume fraction and stiffness using continuous fiber
|
|
2020 |
|
|
|
[374]
|
High-pressure interfacial impregnation by micro-screw in-situ extrusion for 3D printed continuous carbon fiber reinforced nylon composites
|
|
2020 |
|
|
|
[375]
|
3D プリンティング繊維強化樹脂を用いたロボットアームの基礎的検討―第 2 報 関節剛性と繰り返し位置精度の比較―
|
|
2020 |
|
|
|
[376]
|
局所可撓性を有する炭素繊維強化熱可塑性プラスチックの 3D プリンティング
|
|
2020 |
|
|
|
[377]
|
Additive Manufacturing of Short Fiber Reinforced Thermoset Composites
|
|
2020 |
|
|
|
[378]
|
Evaluation of Fiber Placement Strategies for the Implementation of Continuous Reinforcement Fibers in Selective Laser Sintering Process
|
|
2020 |
|
|
|
[379]
|
Field-Assisted Direct Writing for Multifunctional Nanocomposites
|
|
2020 |
|
|
|
[380]
|
Fatigue behaviors of fiber-reinforced composite 3D printing
|
|
Fatigue Life Prediction of Composites and Composite …,
2020 |
|
|
|
[381]
|
Printing of three-dimensional polymer composite structures with continuous fiber reinforcement
|
|
Structure and Properties of Additive Manufactured …,
2020 |
|
|
|
[382]
|
On structure-mechanical and tribological property relationships of additive manufactured continuous carbon fiber/polymer composites
|
|
Structure and Properties of Additive …,
2020 |
|
|
|
[383]
|
A review on 3D printing technology
|
|
Int. J. Eng. Sci,
2020 |
|
|
|
[384]
|
连续碳纤维增强聚乳酸复合材料 3D 打印及回收再利用机理与性能
|
|
机械工程学报,
2019 |
|
|
|
[385]
|
Mechanism and performance of 3D printing and recycling for continuous carbon fiber reinforced PLA composites
|
|
Journal of Mechanical …,
2019 |
|
|
|
[386]
|
Generation of Thermotropic Liquid Crystalline Polymer (TLCP)-Thermoplastic Composite Filaments and Their Processing in Fused Filament Fabrication …
|
|
2019 |
|
|
|
[387]
|
The development of feedstock for 3D printing and 3D knitting of continuous carbon fibre composite filaments: a thesis presented in partial fulfilment of the requirements …
|
|
2019 |
|
|
|
[388]
|
Characterization of Mechanical Behavior of 3D-printed Composite Structures for Applications in Aerospace
|
|
2019 |
|
|
|
[389]
|
A Dynamic Mechanical Analysis Approach to Quality Evaluation of Additively Manufactured Continuous Fiber Reinforced Thermoplastics
|
|
Proceedings of the CAMX,
2019 |
|
|
|
[390]
|
Additively Manufactured Continuous Carbon Fiber Thermoplastic Composites for High-Performance Applications
|
|
2019 |
|
|
|
[391]
|
Sortenreine Kohlenwasserstoffkomposite mit steuerbarer uni-und multidirektionaler Selbstverstärkung sowie Bornitrid-Nanokomposite durch Mehrzentrenkatalyse
|
|
2019 |
|
|
|
[392]
|
In-situ real-time monitoring of additively manufactured polymeric and composite structures using Fiber Bragg Grating sensors
|
|
2019 |
|
|
|
[393]
|
3D printed polycarbonate reinforced acrylonitrile–butadiene–styrene composites: Composition effects on mechanical properties, micro-structure and void formation …
|
|
2019 |
|
|
|
[394]
|
Effect of carbon fibre on reinforcement of thermoplastics using FDM and RSM
|
|
2019 |
|
|
|
[395]
|
Technique for Processing of Continuous Carbon Fibre Reinforced PEEK for Fused Filament Fabrication
|
|
2019 |
|
|
|
[396]
|
Additively Manufactured Carbon Fiber-Reinforced Composites: State of the Art and Perspective
|
|
2019 |
|
|
|
[397]
|
Designing and Fast 3D Printing of Continuous Carbon Fibers for Biomedical Applications
|
|
2019 |
|
|
|
[398]
|
Rule of Mixtures Model to Determine Elastic Modulus and Tensile Strength of 3D Printed Carbon Fiber Reinforced Nylon
|
|
International Design Engineering Technical Conferences and Computers and Information in Engineering Conference,
2019 |
|
|
|
[399]
|
Dynamic Capillary-Driven Additive Manufacturing of Continuous Carbon Fiber Composite
|
|
2019 |
|
|
|
[400]
|
A RIVIEW: JENIS DAN PENCETAKAN 3D (3D PRINTING) UNTUK PEMBUATAN PROTOTIPE
|
|
2019 |
|
|
|
[401]
|
Additive Manufacturing of PLA-Based Composites Using Fused Filament Fabrication: Effect of Graphene Nanoplatelet Reinforcement on Mechanical Properties, Dimensional Accuracy and Texture
|
|
Polymers,
2019 |
|
|
|
[402]
|
Characterizations of continuous carbon fiber-reinforced composites for electromagnetic interference shielding fabricated by 3D printing
|
|
2019 |
|
|
|
[403]
|
Fabrication of the continuous carbon fiber reinforced plastic composites by additive manufacturing
|
|
2019 |
|
|
|
[404]
|
3D printed fiber reinforced polymer composites-Structural analysis
|
|
2019 |
|
|
|
[405]
|
A review on fibre reinforced composite printing via FFF
|
|
2019 |
|
|
|
[406]
|
DYNAMIC MECHANICAL ANALYSIS FOR QUALITY EVALUATION OF ADDITIVELY MANUFACTURED CONTINUOUS FIBER REINFORCED THERMOPLASTIC …
|
|
2019 |
|
|
|
[407]
|
Ply and interlaminar behaviours of 3D printed continuous carbon fibre-reinforced thermoplastic laminates; effects of processing conditions and microstructure
|
|
2019 |
|
|
|
[408]
|
3D Printing of Continuous Wire Polymer Composite for Mechanical and Thermal Applications
|
|
2019 |
|
|
|
[409]
|
Mechanical characterization of FDM 3D printing of continuous carbon fiber reinforced PLA composites
|
|
2019 |
|
|
|
[410]
|
A Novel Route to Fabricate High-Performance 3D Printed Continuous Fiber-Reinforced Thermosetting Polymer Composites
|
|
2019 |
|
|
|
[411]
|
An Insight into Additive Manufacturing of Fiber Reinforced Polymer Composite
|
|
2019 |
|
|
|
[412]
|
3D printing of high density polyethylene by fused filament fabrication
|
|
2019 |
|
|
|
[413]
|
Application of thermotropic liquid crystalline polymer reinforced acrylonitrile butadiene styrene in fused filament fabrication
|
|
2019 |
|
|
|
[414]
|
Fabricación aditiva de estructuras 3D reforzadas: efectos de los parámetros de impresión en el comportamiento mecánico
|
|
2019 |
|
|
|
[415]
|
Three-dimensional printing of continuous carbon fiber-reinforced shape memory polymer composites
|
|
2019 |
|
|
|
[416]
|
Mechanical Testing And Finite Element Analysis Of 3D Printed Continuous Carbon Fiber Reinforced Onyx® Thermoplastic
|
|
2019 |
|
|
|
[417]
|
Flexural properties of three-dimensional printed continuous wire polymer composites
|
|
2019 |
|
|
|
[418]
|
Design for Additive Manufacturing
|
|
2019 |
|
|
|
[419]
|
Tensile property evaluations of 3D printed continuous carbon fiber reinforced thermoplastic composites
|
|
2019 |
|
|
|
[420]
|
Design Optimization and FE Analysis of 3D Printed Carbon PEEK Based Mono Leaf Spring
|
|
2019 |
|
|
|
[421]
|
Mechanism of folding a fiber bundle in the curved section of 3D printed carbon fiber reinforced plastics
|
|
2019 |
|
|
|
[422]
|
MANUFACTURE OF FURNITURE UNDER DEMAND WITH LOW ENVIRONMENTAL IMPACT THROUGH 3D PRINTING OF RECYCLED PLASTIC
|
|
2019 |
|
|
|
[423]
|
Low‐pressure additive manufacturing of continuous fiber‐reinforced polymer composites
|
|
Polymer Composites,
2019 |
|
|
|
[424]
|
3D プリンタ成形 CFRP 積層材中へのひずみゲージ埋め込みによる成形時および使用時のモニタリング
|
|
2019 |
|
|
|
[425]
|
Simulação dos ensaios mecânicos de provetes obtidos por fabrico aditivo
|
|
2019 |
|
|
|
[426]
|
Characterization of the mechanical properties of FFF structures and materials: a review on the experimental, computational and theoretical approaches
|
|
2019 |
|
|
|
[427]
|
Effect of material and process specific factors on the strength of printed parts in fused filament fabrication: a review of recent developments
|
|
2019 |
|
|
|
[428]
|
3D printing of continuous flax fibre reinforced biocomposites for structural applications
|
|
2019 |
|
|
|
[429]
|
Akhoundi, Behnam, Amir Hossein Behravesh, and Arvin Bagheri Saed. "An innovative design approach in three-dimensional printing of continuous fiber–reinforced thermoplastic composites via fused deposition modeling process: In-melt simultaneous impregnation
|
|
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture,
2019 |
|
|
|
[430]
|
Additive manufacturing of continuous fibre reinforced thermoplastic composites using fused deposition modelling: Effect of process parameters on mechanical properties
|
|
Composites Science and Technology,
2019 |
|
|
|
[431]
|
Generation of Polyphenylene Sulfide Reinforced with a Thermotropic Liquid Crystalline Polymer for Application in Fused Filament Fabrication
|
|
2019 |
|
|
|
[432]
|
A critical review on 3D printed continuous fiber-reinforced composites: history, mechanism, materials and properties
|
|
2019 |
|
|
|
[433]
|
3D プリンタ積層造形された連続炭素繊維強化複合材の層間はく離き裂先端部の観察
|
|
2019 |
|
|
|
[434]
|
Additive Manufacturing of Thermoelectric Materials and Improvement of Thermoelectric Performance through Nanoengineering
|
|
2019 |
|
|
|
[435]
|
Evaluation of one-staged 3D Printed Frequency Selective Surface Using Carbon Fiber Reinforced Thermoplastic Composite
|
|
2019 |
|
|
|
[436]
|
Ultrasound-Assisted 3D Printing of Continuous Fiber-Reinforced Thermoplastic (FRTP) Composites
|
|
2019 |
|
|
|
[437]
|
Progression to the next industrial revolution: Industry 4.0 for composites
|
|
2019 |
|
|
|
[438]
|
Highly Loaded Fiber Filled Polymers for Material Extrusion: A Review of Current Understanding
|
|
2019 |
|
|
|
[439]
|
Composite 3D printing for the small size unmanned aerial vehicle structure
|
|
2019 |
|
|
|
[440]
|
Defect detection in 3D printed carbon fibre composites using X-ray Computed Tomography
|
|
2019 |
|
|
|
[441]
|
In-situ characterization of 3D printed continuous fiber reinforced composites: A methodological study using fiber Bragg grating sensors
|
|
2019 |
|
|
|
[442]
|
Hygromechanical properties of 3D printed continuous carbon and glass fibre reinforced polyamide composite for outdoor structural applications
|
|
2019 |
|
|
|
[443]
|
Recent Patents in Additive Manufacturing of Continuous Fiber Reinforced Composites
|
|
2019 |
|
|
|
[444]
|
Tailoring strength and modulus by 3D printing different continuous fibers and filled structures into composites
|
|
2019 |
|
|
|
[445]
|
Influence of mixed isotropic fiber angles and hot press on the mechanical properties of 3D printed composites
|
|
2019 |
|
|
|
[446]
|
Optimizing Topology and Gradient Orthotropic Material Properties Under Multiple Loads
|
|
2019 |
|
|
|
[447]
|
Mechanical characterization and asymptotic homogenization of 3D-printed continuous carbon fiber-reinforced thermoplastic
|
|
2019 |
|
|
|
[448]
|
Exploration of the design freedom of 3D printed continuous fibre-reinforced polymers in open-hole tensile strength tests
|
|
2019 |
|
|
|
[449]
|
Galvanically Stimulated Degradation of Carbon-Fiber Reinforced Polymer Composites: A Critical Review
|
|
2019 |
|
|
|
[450]
|
Additive manufacturing of natural fiber reinforced polymer composites: Processing and prospects
|
|
2019 |
|
|
|
[451]
|
First printing of continuous fibers into ceramics
|
|
Journal of the American Ceramic Society,
2019 |
|
|
|
[452]
|
Enhancing the bearing strength of woven carbon fibre thermoplastic composites through Additive Manufacturing
|
|
2019 |
|
|
|
[453]
|
The trends and challenges of fiber reinforced additive manufacturing
|
|
2019 |
|
|
|
[454]
|
Tensile properties and failure behavior of chopped and continuous carbon fiber composites produced by Additive Manufacturing
|
|
2019 |
|
|
|
[455]
|
Process-structure-properties of additively manufactured continuous carbon fiber reinforced thermoplastic composite
|
|
2019 |
|
|
|
[456]
|
Manufacture of Furniture under Demand with Low Environmental Impact Through 3D Printing of Recycled Plastic. 6
|
|
2019 |
|
|
|
[457]
|
3D プリンタ用短繊維強化再生フィラメントの超音波検査
|
|
2019 |
|
|
|
[458]
|
3D プリント炭素繊維強化プラスチックの湾曲部における繊維束の折り返し発生メカニズム
|
|
2019 |
|
|
|
[459]
|
3D プリントした湾曲連続繊維複合材の曲げ破壊則
|
|
2019 |
|
|
|
[460]
|
Sortenreine Kohlenwasserstoffkomposite mit steuerbarer uni-und multidirektionaler Selbstverstärkung sowie Bornitrid-Nanokomposite durch …
|
|
2019 |
|
|
|
[461]
|
3D プリントによる曲線繊維配向を有する連続炭素繊維強化熱可塑性プラスチックの連続体損傷力学に基づく損傷進展シミュレーション
|
|
2019 |
|
|
|
[462]
|
ВЛИЯНИЕ ТЕХНОЛОГИЧЕСКИХ РЕЖИМОВ FDM-ПЕЧАТИ И СОСТАВА ИСПОЛЬЗУЕМЫХ МАТЕРИАЛОВ НА ФИЗИКО-МЕХАНИЧЕСКИЕ …
|
|
2019 |
|
|
|
[463]
|
3D printing materials for large-scale insulation and support matrices: thesis by publications presented in partial fulfilment of the requirements for the degree of Doctor …
|
|
2019 |
|
|
|
[464]
|
Topology optimization of weakly coupled thermomechanical systems for additive manufacturing.
|
|
2019 |
|
|
|
[465]
|
Mechanical properties of carbon and glass fibre reinforced composites produced by additive manufacturing: A short review
|
|
2019 |
|
|
|
[466]
|
Strength analysis of 3D printed carbon fibre reinforced thermoplastic using experimental and numerical methods
|
|
2019 |
|
|
|
[467]
|
A Sensitivity Analysis-Based Parameter Optimization Framework for 3D Printing of Continuous Carbon Fiber/Epoxy Composites
|
|
2019 |
|
|
|
[468]
|
A review on 3D printed matrix polymer composites: its potential and future challenges
|
|
2019 |
|
|
|
[469]
|
MECHANICAL PROPERTIES OF 3D PRINTED FIBER REINFORCED THERMOPLASTIC
|
|
Proceedings of the ASME 2019 International Mechanical Engineering Congress and Exposition,
2019 |
|
|
|
[470]
|
Generation of Thermotropic Liquid Crystalline Polymer (TLCP)-Thermoplastic Composite Filaments and Their Processing in Fused Filament Fabrication (FFF)
|
|
2019 |
|
|
|
[471]
|
Enhancing the Frictional Behaviour of H-BN Reinforced Nanocomposites Through Laser Shock Peening
|
|
2019 |
|
|
|
[472]
|
Fabrication and Characterization of the Recycling of Composite Palm Materials, Shell, Leaves and Branches in Saudi Arabia
|
|
2019 |
|
|
|
[473]
|
Dynamic Mechanical Analysis for Quality Evaluation of Additively Manufactured Continuous Fiber Reinforced Thermoplastic Matrix Composites subject to …
|
|
2019 |
|
|
|
[474]
|
Additive manufacturing of PLA-based composites using fused filament fabrication: Effect of graphene nanoplatelet reinforcement on mechanical properties …
|
|
2019 |
|
|
|
[475]
|
РАЗРАБОТКА УГЛЕ-И СТЕКЛОНАПОЛНЕННЫХ КОМПОЗИЦИОННЫХ МАТЕРИАЛОВ ДЛЯ 3D-ПЕЧАТИ НА ОСНОВЕ ПОЛИФЕНИЛЕНСУЛЬФОНА
|
|
2019 |
|
|
|
[476]
|
3D Printable Composite Materials: A Review and Prospective
|
|
2018 |
|
|
|
[477]
|
Evaluation of carbon fiber reinforced polymer composites produced by additive manufacturing for design guidelines
|
|
2018 |
|
|
|
[478]
|
Effects of processing conditions on orientation for short-fiber composites in fused filament fabrication
|
|
2018 |
|
|
|
[479]
|
Corso di Laurea Magistrale in Ingegneria Meccanica
|
|
2018 |
|
|
|
[480]
|
Bending fracture rule for 3D-printed curved continuous-fiber composite
|
|
2018 |
|
|
|
[481]
|
An evaluation of three different techniques for melt impregnation of glass fiber bundles with polyamide 12
|
|
Polymer Engineering & Science,
2018 |
|
|
|
[482]
|
Improving mechanical properties of continuous fiber-reinforced thermoplastic composites produced by FDM 3D printer
|
|
Journal of Reinforced Plastics and Composites,
2018 |
|
|
|
[483]
|
THEORETICAL ANALYSIS AND PRACTICAL CASE STUDIES OF SLA, POLYJET AND FDM MANUFACTURING TECHNIQUES
|
|
2018 |
|
|
|
[484]
|
Additive manufacturing of woven carbon fibre polymer composites
|
|
Composite Structures,
2018 |
|
|
|
[485]
|
An efficient manufacturing method for I-shaped cross-sectional CFRP beam with arbitrary arrangement of carbon fiber using electro-activated resin molding
|
|
Mechanics of Advanced Materials and Structures,
2018 |
|
|
|
[486]
|
Optimisation of Fibre-Paths in Composites Produced by Additive Manufacturing
|
|
EngOpt 2018 Proceedings of the 6th International Conference on Engineering Optimization,
2018 |
|
|
|
[487]
|
Interfacial performance and fracture patterns of 3D printed continuous carbon fiber with sizing reinforced PA6 composites
|
|
Composites Part A: Applied Science and Manufacturing,
2018 |
|
|
|
[488]
|
Compressive Properties of 3D Printed Polylactic Acid Matrix Composites Reinforced by Short Fibers and SiC Nanowires
|
|
Advanced engineering materials,
2018 |
|
|
|
[489]
|
Recent Progress in Additive Manufacturing of Fiber Reinforced Polymer Composite
|
|
Advanced Materials Technologies,
2018 |
|
|
|
[490]
|
APPLICATION OF DIGITAL IMAGE CORRELATION TECHNIQUE TO TENSILE TEST FOR PRINTED PLA SPECIMENS
|
|
INTERNATIONAL JOURNAL OF 3D PRINTING TECHNOLOGIES AND DIGITAL INDUSTRY,
2018 |
|
|
|
[491]
|
Exploration of specimen geometry and tab configuration for tensile testing exploiting the potential of 3D printing freeform shape continuous carbon fibre-reinforced nylon matrix composites
|
|
Polymer Testing,
2018 |
|
|
|
[492]
|
Single step 3D printing of bioinspired structures via metal reinforced thermoplastic and highly stretchable elastomer
|
|
Composite Structures,
2018 |
|
|
|
[493]
|
A micromechanical approach for predicting effective mechanical properties of Fiber-reinforced polymer (FRP) composites fabricated with 3D printers
|
|
Journal of Engineering and Technology,
2018 |
|
|
|
[494]
|
Polymer Composite Manufacturing by FDM 3D Printing Technology
|
|
2018 |
|
|
|
[495]
|
Three-dimensionally printed designable joint for carbon fibre reinforced plastics
|
|
Advanced Composite Materials,
2018 |
|
|
|
[496]
|
Performance-driven 3D printing of continuous curved fibre reinforced polymer composites a preliminary numerical study
|
|
2018 |
|
|
|
[497]
|
Impact damage resistance of 3D printed continuous fibre reinforced thermoplastic composites using fused deposition modelling
|
|
Composites Part B: Engineering,
2018 |
|
|
|
[498]
|
Influence of process interruption on mechanical properties of material extrusion parts
|
|
Rapid Prototyping Journal,
2018 |
|
|
|
[499]
|
Additive manufacturing technology and its implementation in construction as an eco-innovative solution
|
|
Automation in Construction,
2018 |
|
|
|
[500]
|
Microstructure and mechanical properties of three dimensional-printed continuous fiber composites
|
|
Journal of Composite Materials,
2018 |
|
|
|
[501]
|
3D Printing of Carbon Fiber Reinforced Plastics and their Applications
|
|
Materials Science Forum,
2018 |
|
|
|
[502]
|
3D printing of composite sandwich structures using continuous carbon fiber and fiber tension
|
|
Composites Part A: Applied Science and Manufacturing,
2018 |
|
|
|
[503]
|
Composite materials parts manufacturing
|
|
CIRP Annals,
2018 |
|
|
|
[504]
|
Enhanced Bonding via Additive Manufacturing‐Enabled Surface Tailoring of 3D Printed Continuous‐Fiber Composites
|
|
Advanced engineering materials,
2018 |
|
|
|
[505]
|
Preparation and characterization of 3D printed continuous carbon fiber reinforced thermosetting composites
|
|
Polymer Testing,
2018 |
|
|
|
[506]
|
Fabrication and mechanical characterization of continuous carbon fiber-reinforced thermoplastic using a preform by three-dimensional printing and via hot-press molding
|
|
Advanced Composite Materials,
2018 |
|
|
|
[507]
|
Fused filament fabrication of fiber-reinforced polymers: A review
|
|
Additive Manufacturing,
2018 |
|
|
|
[508]
|
A design methodology for continuous fiber additive manufacturing using advanced computer aided engineering techniques
|
|
2018 |
|
|
|
[509]
|
Tensile properties, void contents, dispersion and fracture behaviour of 3D printed carbon nanofiber reinforced composites
|
|
Journal of Reinforced Plastics and Composites,
2018 |
|
|
|
[510]
|
AddJoining: A novel additive manufacturing approach for layered metal-polymer hybrid structures
|
|
Materials Letters,
2018 |
|
|
|
[511]
|
Mechanical Properties Assessment and Reliability Verification for FDM 3D Printed Products
|
|
2018 |
|
|
|
[512]
|
A novel free-hanging 3D printing method for continuous carbon fiber reinforced thermoplastic lattice truss core structures
|
|
Materials & Design,
2018 |
|
|
|
[513]
|
Performance-driven 3D printing of continuous curved carbon fibre reinforced polymer composites: A preliminary numerical study
|
|
Composites Part B: Engineering,
2018 |
|
|
|
[514]
|
Characterization of mechanical properties and fracture mode of additively manufactured carbon fiber and glass fiber reinforced thermoplastics
|
|
Materials & Design,
2018 |
|
|
|
[515]
|
Interlaminar bonding performance of 3D printed continuous fibre reinforced thermoplastic composites using fused deposition modelling
|
|
Polymer Testing,
2018 |
|
|
|
[516]
|
Optimization of Design Process of Fused Filament Fabrication (FFF) 3D Printing
|
|
2018 |
|
|
|
[517]
|
Characterization of continuous fibre reinforced polymers
|
|
2018 |
|
|
|
[518]
|
Fracture toughness enhancement of carbon fiber–reinforced polymer composites utilizing additive manufacturing fabrication
|
|
2018 |
|
|
|
[519]
|
Optimization of Design and Manufacturing Process of Fusion Filament Fabrication (FFF) 3D Printing
|
|
2018 |
|
|
|
[520]
|
3D プリンタ用再生フィラメントの超音波検査
|
|
2018 |
|
|
|
[521]
|
3D プリント CFRP を伝搬する超音波伝搬挙動の可視化
|
|
2018 |
|
|
|
[522]
|
3D プリンタによる連続炭素繊維強化熱可塑性プラスチックの擬似等方積層板の力学的特性
|
|
2018 |
|
|
|
[523]
|
Modelling and path planning for additive manufacturing of continuous fiber composites
|
|
2018 |
|
|
|
[524]
|
A REVIEW ON FIBER REINFORCEMENT IN COMPOSITE PLASTICS BY FUSED DEPOSITION MODELLING
|
|
International Journal of Mechanical and ProductionEngineering Research and Development,
2018 |
|
|
|
[525]
|
Numerische Simulation und experimentelle Validierung der Temperatur-und Druckverhältnisse eines mehrkanaligen Thermoplastdruckkopfes
|
|
2018 |
|
|
|
[526]
|
Exploration of specimens' geometry and tab configuration for tensile testing exploiting
|
|
Polymer Testing,
2018 |
|
|
|
[527]
|
Polimer matrisli sürekli fiber takviyeli kompozit parça üretimi için bir eklemeli imalat yönteminin geliştirilmesi
|
|
2018 |
|
|
|
[528]
|
Multi-axis additive manufacturing and 3D scanning of freeform models
|
|
2018 |
|
|
|
[529]
|
Modellazione, produzione e testing di materiali compositi a fibra lunga realizzati mediante additive manufacturing= Modelling, production and testing of long fibre …
|
|
2018 |
|
|
|
[530]
|
MECHANICAL TESTING.
|
|
ZAKI, Y Hirano… - SAMPE …,
2018 |
|
|
|
[531]
|
Modeling and additive manufacturing of multi-material structures
|
|
2017 |
|
|
|
[532]
|
Coaxial additive manufacturing of continuous carbon fiber composites
|
|
2017 |
|
|
|
[533]
|
A review paper on 3D-Printing aspects and various processes used in the 3D-Printing
|
|
2017 |
|
|
|
[534]
|
3D Printed Unidirectional Carbon Fibre Reinforced Polymers for Aerospace Applications
|
|
2017 |
|
|
|
[535]
|
Effect of tow shearing on reinforcement positional fidelity in the manufacture of a continuous fiber reinforced thermoplastic matrix composite via pultrusion-like …
|
|
2017 |
|
|
|
[536]
|
Extrusion Deposition Additive Manufacturing of Fiber Reinforced Semi-Crystalline Polymers
|
|
2017 |
|
|
|
[537]
|
A Particle Element Approach for Modelling the 3D Printing Process of Fibre Reinforced Polymer Composites
|
|
Journal of Manufacturing and Materials Processing,
2017 |
|
|
|
[538]
|
Anisotropic mechanical properties of oriented carbon fiber filled polymer composites produced with fused filament fabrication
|
|
Additive Manufacturing,
2017 |
|
|
|
[539]
|
The effect of tow shearing on reinforcement positional fidelity in the manufacture of a continuous fiber reinforced thermoplastic matrix composite via pultrusion-like processing of commingled feedstock
|
|
Doctoral dissertation, Colorado State University. Libraries,
2017 |
|
|
|
[540]
|
Computational Modelling of Fluid-Solid Interaction Problems by Coupling Smoothed Particles Hydrodynamics and the Discrete Element Method
|
|
2017 |
|
|
|
[541]
|
Experimental Investigation of Processing Parameters on Porosity in Continuous Lattice Fabrication
|
|
2017 |
|
|
|
[542]
|
Additive manufacturing of thermoplastic matrix composites
|
|
Dissertation, Open Repository of the University of Porto,
2017 |
|
|
|
[543]
|
Liquid-Substrate Interactions Relevant to 3D Printing of Fiber Reinforced Soft Composites
|
|
ProQuest Dissertations Publishing,
2017 |
|
|
|
[544]
|
The application of composite through-thickness assessment to additively manufactured structures
|
|
2017 |
|
|
|
[545]
|
Temperature Control of Continuous Carbon Fibre Reinforced Thermoplastic Composites by 3D Printing
|
|
Proc. Int. Conf. on Composite Materials, Xi'an, China,
2017 |
|
|
|
[546]
|
COBEM-2017-0124 RESIDUAL THERMAL STRESS IN FUSED DEPOSITION MODELLING
|
|
2017 |
|
|
|
[547]
|
Resin molding by using electro-activated deposition for efficient manufacturing of carbon fiber reinforced plastic
|
|
Composite Structures,
2017 |
|
|
|
[548]
|
A new cost/weight trade-off method for airframe material decisions based on variable fuel price
|
|
The European Journal of Contraception & Reproductive Health Care,
2017 |
|
|
|
[549]
|
Additive manufacturing of thermoplastic matrix composites using fused deposition modeling: A comparison of two reinforcements
|
|
Journal of Composite Materials,
2017 |
|
|
|
[550]
|
Fabrication of continuous carbon, glass and Kevlar fibre reinforced polymer composites using additive manufacturing
|
|
Additive Manufacturing,
2017 |
|
|
|
[551]
|
A review on additive manufacturing of polymer-fiber composites
|
|
Composite Structures,
2017 |
|
|
|
[552]
|
Automated manufacturing and processing of fiber-reinforced polymer (FRP) composites: An additive review of contemporary and modern techniques for advanced materials manufacturing
|
|
Additive Manufacturing,
2017 |
|
|
|
[553]
|
Additive manufacturing of PLA structures using fused deposition modelling: Effect of process parameters on mechanical properties and their optimal selection
|
|
Materials & Design,
2017 |
|
|
|
[554]
|
IMPROVING QUALITY OF MULTI-FUNCTIONAL STRUCTURES CREATED VIA MATERIAL EXTRUSION ADDITIVE MANUFACTURING
|
|
2017 |
|
|
|
[555]
|
Experimental characterization and micrography of 3D printed PLA and PLA reinforced with short carbon fibers
|
|
Composites Part B: Engineering,
2017 |
|
|
|
[556]
|
A REVIEW ON PROPERTIES OF AEROSPACE MATERIALS THROUGH ADDITIVE MANUFACTURING
|
|
International Journal of Modern Trends in Engineering and Research (IJMTER),
2017 |
|
|
|
[557]
|
3D プリンタによる連続炭素繊維強化プラスチックの積層造形と機械的特性評価
|
|
日本複合材料学会誌,
2017 |
|
|
|
[558]
|
СИНТЕЗ И СВОЙСТВА ПОЛИФЕНИЛЕНСУЛЬФОНА И ЕГО СОПОЛИМЕРОВ ДЛЯ ПРИМЕНЕНИЯ В АДДИТИВНЫХ ТЕХНОЛОГИЯХ
|
|
2017 |
|
|
|
[559]
|
電着を用いて樹脂含浸した CFRP へのセルロースナノファイバー添加の効果
|
|
M&M 材料力学カンファレンス,
2017 |
|
|
|
[560]
|
Design and optimization method for 3D printed carbon reinforced aircraft components
|
|
21st International Conference on Composite Materials,
2017 |
|
|
|
[561]
|
3D printing of continuous fibre reinforced thermoplastic composites
|
|
21st International Conference on Composite Materials,
2017 |
|
|
|
[562]
|
Optimal Design of Topology and Gradient Orthotropic Material
|
|
2017 |
|
|
|
[563]
|
Mechanical characterization of Polymer matrix composites produced by 3D printing
|
|
2017 |
|
|
|
[564]
|
Tensile and fatigue failure of 3D printed parts with continuous fibre reinforcement
|
|
International Journal of Rapid Manufacturing,
2017 |
|
|
|
[565]
|
The Effect of Tow Shearing on Reinforcement Positional Fidelity in the Manufacture of a Continuous Fiber Reinforced Thermoplastic Matrix Composite via Pultrusion …
|
|
2017 |
|
|
|
[566]
|
Influence of Embedding Process on Mechanical Properties of Material Extrusion Parts
|
|
2016 |
|
|
|
[567]
|
Fused Deposition Modeling of Fiber-Reinforced Thermoplastic Polymers: Past Progress and Future Needs
|
|
2016 |
|
|
|
[568]
|
3D プリントによる製造を対象とした面内曲線状炭素繊維配置最適化設計
|
|
M&M 材料力学カンファレンス,
2016 |
|
|
|
[569]
|
Additive manufacturing of carbon fiber-reinforced plastic composites using fused deposition modeling: Effects of process parameters on tensile properties
|
|
Journal of Composite Materials,
2016 |
|
|
|
[570]
|
Rapid prototyping of continuous carbon fiber reinforced polylactic acid composites by 3D printing
|
|
Journal of Materials Processing Technology,
2016 |
|
|
|
[571]
|
Fiber Line Optimization in Single Ply for 3D Printed Composites
|
|
2016 |
|
|
|
[572]
|
3D printing of polymer matrix composites: A review and prospective
|
|
Composites Part B: Engineering,
2016 |
|
|
|
[573]
|
3D printing of fibre reinforced honeycomb structured composite materials
|
|
2016 |
|
|
|
[574]
|
An anisotropic topology optimization method for carbon fiber-reinforced Fused Filament Fabrication.
|
|
2016 |
|
|
|
[575]
|
Exploration of the design freedom of 3D printed continuous fibre-reinforced
|
|
Mater. Res,
2014 |
|
|
|
[576]
|
The flexural and compressive properties of sandwich composites with different 3D-printed core structures
|
|
|
|
|
|
[577]
|
Microcracking Resistance of 3D Printed Fibre Composites at Cryogenic Temperatures
|
|
|
|
|
|
[578]
|
Investigations on the Mechanical Characterization of Additively Manufactured Polymer Composite Materials Fabricated Via MEX
|
|
|
|
|
|
[579]
|
Experimental analysis of 3D printed continuous carbon/glass hybrid fiber reinforced PLA composites: Revealing synergistic mechanical properties and failure …
|
|
|
|
|
|
[580]
|
AN INVESTIGATION INTO 3D PRINTING OF FIBER REINFORCED THERMOPLASTIC COMPOSITES
|
|
|
|
|
|
[581]
|
Учредители: Новосибирский государственный архитектурно-строительный университет
|
|
|
|
|
|
[582]
|
Advanced 3D Printing Materials: A Short Review of Polymers and their Composites
|
|
|
|
|
|
[583]
|
Influence of void contour on the elastic behaviour of additively manufactured acrylonitrile butadiene styrene
|
|
|
|
|
|
[584]
|
FUSED FILAMENT FABRICATION 3D PRINTING OF CONTINUOUS CARBON FIBER REINFORCED THERMOPLASTIC: RELATION BETWEEN CROSS …
|
|
|
|
|
|
[585]
|
Comparative study of the influences of international standards on structural performance and fracture behaviour of 3D printed long fiber composite structures
|
|
|
|
|
|
[586]
|
Mechanical behavior analysis of additive manufactured KFR composites
|
|
|
|
|
|
[587]
|
Mechanical and physical study on stainless steel alloys fabricated by metal Material Extrusion
|
|
|
|
|
|
[588]
|
Concept of 3D Printing of Wooden Structures
|
|
|
|
|
|
[589]
|
3D PRINTING TECHNOLOGY: MATERIAL USED FOR FABRICATION AND ITS APPLICATIONS
|
|
|
|
|
|
[590]
|
A Novel Carbon Fibre Reinforced Polymer (Cfrp) Manufacturing Method-Double Point Incremental Forming (Dpif) with Direct Electrical Curing (Dec)
|
|
|
|
|
|
[591]
|
3D PRINTING TECHNOLOGY AND NANOMATERIALS
|
|
|
|
|