Author(s)

Mohammed A. Eslami, John R. Rzasa, Stuart D. Milner, Christopher C. Davis^*

Department of Electrical and Computer Engineering, University of Maryland, College Park, USA.

This paper presents a real-time, dynamic system that uses high resolution gimbals and motorized lenses with position encoders on their zoom and focus elements to “recalibrate” the system as needed to track a target. Systems that initially calibrate for a mapping between pixels of a wide field of view (FOV) master camera and the pan-tilt (PT) settings of a steerable narrow FOV slave camera assume that the target is travelling on a plane. As the target travels through the FOV of the master camera, the slave cameras PT settings are then adjusted to keep the target centered within its FOV. In this paper, we describe a system we have developed that allows both cameras to move and extract the 3D coordinates of the target. This is done with only a single initial calibration between pairs of cameras and high-resolution pan-tilt-zoom (PTZ) platforms. Using the information from the PT settings of the PTZ platform as well as the precalibrated settings from a preset zoom lens, the 3D coordinates of the target are extracted and compared to those of a laser range finder and static-dynamic camera pair accuracies.

Surveillance, PTZ Cameras, Cooperating Cameras

Eslami, M. , Rzasa, J. , Milner, S. and Davis, C. (2015) Dual Dynamic PTZ Tracking Using Cooperating Cameras. Intelligent Control and Automation, 6, 45-54. doi: 10.4236/ica.2015.61006.