Journal of Flow Control, Measurement & Visualization

Volume 2, Issue 4 (October 2014)

ISSN Print: 2329-3322   ISSN Online: 2329-3330

Precise Positioning of Pneumatic Artificial Muscle Systems

HTML  XML Download Download as PDF (Size: 3847KB)  PP. 138-153  
DOI: 10.4236/jfcmv.2014.24016    3,669 Downloads   5,714 Views  Citations

ABSTRACT

Pneumatic artificial muscles (PAMs) currently possess a high power-to-weight ratio, a high power-to-volume ratio, and a high degree of safety. They have therefore been applied to many power assist devices and positioning mechanisms such as bionic robots, welfare devices, and parallel manipulators. However, the significant nonlinear characteristics of PAM mechanisms limit their positioning accuracies. The accuracies are generally lower than 5 μm, which preclude the PAM from precision systems. Nevertheless, enhancing the positioning accuracy is desired to extend the application fields of PAMs. This study aims to clarify a practical controller design method to achieve the precise positioning of PAM systems. As the first step of this research, a linear motion mechanism with a pair of McKibben PAMs was constructed and a conventional dynamic model for this system is introduced. The dynamic model is used to explain the basic characteristics of the PAM mechanism and discuss the necessary characteristics for precise positioning. Then open-loop step and sinusoidal responses of the PAM mechanism were examined by experimental and simulated results. Next, for precise positioning, the practical controller design procedure is discussed and determined based on the measured open-loop responses. The proposed controller design procedure can be easily implemented into PAM mechanisms without an exact dynamic model. The positioning performance of such a system was experimentally evaluated. The experimental results show that although the positioning accuracy depends on the target position, the positioning error is lower than 1 μm even in the worst case and the positioning resolution can be set to 0.5 μm.

Share and Cite:

Wang, S. , Sato, K. and Kagawa, T. (2014) Precise Positioning of Pneumatic Artificial Muscle Systems. Journal of Flow Control, Measurement & Visualization, 2, 138-153. doi: 10.4236/jfcmv.2014.24016.

Cited by

[1] MOTION CHARACTERIZATION OF A SWITCHED RELUCTANCE ACTUATOR–A SIGNAL DRIVEN APPROACH
Jurnal Teknologi, 2021
[2] Bio-inspired Modeling and Position Control for Pneumatic Artificial Muscle
2020
[3] Design, Modeling and Control of Bionic Knee in Artificial Leg.
2019
[4] Design, modeling and control of bionic knee in artificial leg
2019
[5] Applications of UKF and EnKF to estimation of contraction ratio of McKibben pneumatic artificial muscles
2017
[6] Design of EMG Acquisition Circuit to Control an Antagonistic Mechanism Actuated by Pneumatic Artificial Muscles PAMs
International Journal of Mechanical & Mechatronics Engineering, 2017
[7] Characterization of Pneumatic Artificial Muscle System in an Opposing Pair Configuration
2016
[8] Tracking Control of Vertical Pneumatic Artificial Muscle System Using PID
2016
[9] High-precision motion control of a stage with pneumatic artificial muscles
Precision Engineering, 2015
[10] Discrete first and second order sliding mode controllers for a pneumatic artificial muscles robot manipulator
2015 4th International Conference on Electrical Engineering (ICEE), 2015

Copyright © 2025 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.