|
[1]
|
Performance evaluation of abrasive water jet machining on spent garnet reinforced hybrid composite
|
|
Materials Today …,
2024 |
|
|
|
[2]
|
Shear properties and failure mechanisms of adhesive bonded composite joint: Effect of glass particle reinforcement
|
|
Polymer Composites,
2024 |
|
|
|
[3]
|
Low-velocity Impact performance of 3D-printed PLA/Epoxy/Glass fibers of composite structures and latches
|
|
Areqi, B Aloyaydi, S Sivasankaran… - Materials Today …,
2024 |
|
|
|
[4]
|
Intelligent self‐healable electroactive carboxymethyl cellulose hydrogel containing conductive polythiophene and acid hydrolyzed cellulose
|
|
Journal of Applied …,
2024 |
|
|
|
[5]
|
Mechanothermal assessment of outdoors aged hybrid glass fibre reinforced polymer composite filled with fly ash as industrial waste
|
|
Journal of …,
2024 |
|
|
|
[6]
|
Comparative Study of the Mechanical Properties of a Novel Epoxy Composite Material Reinforced by Bidirectional Woven Carbon Fabric and Hybrid Kevlar/E-Glass
|
|
… Research in Africa,
2024 |
|
|
|
[7]
|
Mechanical Properties of Alkaline Modified Snail and Groundnut Shells Fillers Reinforced Glass Fiber Epoxy Composites
|
|
NIPES-Journal of Science and Technology …,
2024 |
|
|
|
[8]
|
Performance of Fibreglass Mat and Woven for Prosthetic Leg Socket Application
|
|
… in Materials Science …,
2023 |
|
|
|
[9]
|
Mechanical Behaviour of Polymer Matrix Composite Reinforced by Silicon Carbide Particles
|
|
Journal of Techniques,
2023 |
|
|
|
[10]
|
Mechanical properties of hybrid composite glass fiber and kevlar fiber reinforcement with nano alumina
|
|
AIP Conference …,
2023 |
|
|
|
[11]
|
Impact of ZnO nanoparticles on mechanical and dielectric properties of epoxy resin composites
|
|
AIP Conference …,
2023 |
|
|
|
[12]
|
Mechanical and Tribological behaviour of Tungsten carbide nanoparticles filled Carbon-Epoxy polymer hybrid Nanocomposites
|
|
2023 |
|
|
|
[13]
|
Mechanical analysis of multilayer composite materials with duroplastic matrix after exposure to low temperatures
|
|
Archives of Materials Science and …,
2023 |
|
|
|
[14]
|
Friction and wear mechanism of polymers, their composites and nanocomposites
|
|
Tribology of Polymers, Polymer Composites, and …,
2023 |
|
|
|
[15]
|
Thermal, Mechanical and Flame Retardant Properties of Antimony Trioxide-Titania Aerogel Composite (ATAC) Reinforced Epoxy Matrix
|
|
Journal of Inorganic and …,
2023 |
|
|
|
[16]
|
Investigation of mechanical properties of glass fibre/SiC-B4C reinforced hybrid polymer composite
|
|
Materials Today: Proceedings,
2023 |
|
|
|
[17]
|
Macrostructure and Fracture Behaviour of Rice Husk and MWCNT Dispersion Strengthened Alkali Treated Banana Fiber Matrix Hybrid Composites
|
|
Materials Science Forum,
2023 |
|
|
|
[18]
|
Adsorption mechanism of E‐glass fiber/Aluminum particles/MWCNT filled epoxy matrix polymer composite in electronic applications
|
|
Environmental Quality …,
2023 |
|
|
|
[19]
|
Effect of hybridization on natural fiber reinforced polymer composite materials–A review
|
|
Polymer …,
2023 |
|
|
|
[20]
|
Enhancement in Fatigue Performance of FRP composites with various fillers: A review
|
|
Composite Structures,
2023 |
|
|
|
[21]
|
Waste iron filings to improve the mechanical and electrical properties of glass fiber-reinforced epoxy (GFRE) composites
|
|
Journal of Composites Science,
2023 |
|
|
|
[22]
|
Biobased hybrid composite design for optimum hardness and wear resistance
|
|
Composites Part C …,
2023 |
|
|
|
[23]
|
Importance of Fiber-/Nanofiller-Based Polymer Composites in Mechanical and Erosion Performance: A Review
|
|
Journal of …,
2023 |
|
|
|
[24]
|
Measurement of surface roughness in drilling on epoxy matrix composite reinforced with E-Glass fibre and calophyllum inophyllum powder in comparison with plain GFRP epoxy composite
|
|
International Journal of Mechanical Engineering,
2022 |
|
|
|
[25]
|
Additive manufacturing and characterisation of biomedical materials
|
|
Advanced Materials for Biomechanical …,
2022 |
|
|
|
[26]
|
Study of fiber delamination on silane modified ramie fiber/OMMT nano‐clay epoxy composite under low‐velocity impact, shear load, and high‐speed drilling
|
|
Polymer …,
2022 |
|
|
|
[27]
|
Experimentation on Enhancing Mechanical Characteristics of E-glass Fiber-Strengthened Epoxy Resins with Fillers
|
|
Journal of The Institution of …,
2022 |
|
|
|
[28]
|
Fly ash composites: A review
|
|
arXiv preprint arXiv:2202.11167,
2022 |
|
|
|
[29]
|
Experimental investigation of Mode-I fracture behavior of nano alumina filler reinforced hybrid composites
|
|
Materials Today: Proceedings,
2022 |
|
|
|
[30]
|
Improvement of impact strength of epoxy matrix composites reinforced with E-glass fiber and novel calophyllum inophyllum filler in comparison with plain GFRP …
|
|
Materials Today: Proceedings,
2022 |
|
|
|
[31]
|
Wear and tensile properties of polyester resin modified by lemon peels particle/chopped carbon fibers
|
|
AIP Conference …,
2022 |
|
|
|
[32]
|
On this page
|
|
Advances in Polymer Technology,
2022 |
|
|
|
[33]
|
Fiber Inclusions-Based Epoxy Composites and Their Applications
|
|
Epoxy-Based Composites,
2022 |
|
|
|
[34]
|
Fabrication and Mechanical Characterization of Glass Fiber Reinforced Epoxy with CFA and SiC
|
|
IOP Conference …,
2022 |
|
|
|
[35]
|
Evaluation of mechanical properties of Banyan/glass fiber reinforced epoxy composites
|
|
AIP Conference …,
2022 |
|
|
|
[36]
|
Effect of nanosilica on mechanical, thermal, fatigue, and antimicrobial properties of cardanol oil/sisal fiber reinforced epoxy composite
|
|
Polymer Composites,
2022 |
|
|
|
[37]
|
Investigation of Compression properties on E-Glass fiber reinforced polymer matrix composites used for micro wind turbine blades
|
|
2022 |
|
|
|
[38]
|
Impact Behavior of Glass and Carbon-Fiber-Based Reinforced Polymer Composites
|
|
Modern Manufacturing Systems,
2022 |
|
|
|
[39]
|
Experimental Research on the Effect of Fiberglass on the Performance of Epoxy Asphalt Concrete
|
|
Sustainability,
2022 |
|
|
|
[40]
|
Mechanical characteristics of glass epoxy composites with Yttrium powder fillers
|
|
Materials Today …,
2022 |
|
|
|
[41]
|
Experimental Investigation of Tensile and Impact Response of Nano-Alumina-Filled Epoxy Hybrid Composites Reinforced with Carbon-Kevlar and Carbon-Glass …
|
|
Arabian Journal for …,
2022 |
|
|
|
[42]
|
Mechanical and thermo-mechanical properties of glass fiber reinforced epoxy composites with boron carbide nanofiller
|
|
Proceedings of the Institution of …,
2022 |
|
|
|
[43]
|
Mechanical properties of polymer matrix/glass fiber composites containing metal/hybrid nanoparticles-an overview
|
|
High Performance …,
2022 |
|
|
|
[44]
|
Research Article Mechanical Properties of Epoxy Composite Using Papaya Slice Biochar and Areca Nut Chopped Fibre
|
|
2022 |
|
|
|
[45]
|
Textiles à base de fibres naturelles d'origine marocaine pour application matériaux composites
|
|
2021 |
|
|
|
[46]
|
Effect of fillers in glass matrix composite material suitable for light weight and high thermal strength applications
|
|
Materials Today: Proceedings,
2021 |
|
|
|
[47]
|
Impact of Water Particles on Fly Ash–Filled E-Glass Fiber–Reinforced Epoxy Composites
|
|
Advanced Materials and …,
2021 |
|
|
|
[48]
|
Introduction to Epoxy Composites
|
|
2021 |
|
|
|
[49]
|
Geopolymers and Fiber-Reinforced Concrete Composites in Civil Engineering
|
|
2021 |
|
|
|
[50]
|
Influence of cotton waste and flame-retardant additives on the mechanical, thermal, and flammability properties of phenolic novolac epoxy composites
|
|
2021 |
|
|
|
[51]
|
The effects of diammonium phosphate concentration on mechanical properties of coir reinforced polymer composites
|
|
2021 |
|
|
|
[52]
|
Study of thermo mechanical properties of surface modified graphene on E-glass composite
|
|
2021 |
|
|
|
[53]
|
Fabrication and mechanical property evaluation of non-woven banana fibre epoxy-based polymer composite
|
|
2021 |
|
|
|
[54]
|
Advances, limitations and prospects of nondestructive testing and evaluation of thick composites and sandwich structures: A state-of-the-art review
|
|
Composite …,
2021 |
|
|
|
[55]
|
Mechanical and abrasive wear performance of titanium di-oxide filled woven glass fibre reinforced polymer composites by using taguchi and edas approach
|
|
Materials,
2021 |
|
|
|
[56]
|
Effect of Span Length on Flexural Strength of Glass Fiber Reinforced Polymer Matrix Composite
|
|
2021 |
|
|
|
[57]
|
Cenosphere powder filled basalt fiber reinforced epoxy composite: Physical, mechanical, and thermal conductivity analysis
|
|
2021 |
|
|
|
[58]
|
X-band radar-absorbing structures based on MWCNTs/NiZn ferrite nanocomposites
|
|
2021 |
|
|
|
[59]
|
A study on glass fiber reinforced composite filled with polypropylene and nanoparticles: Anti-riot jackets
|
|
International Journal of Mechanical Engineering,
2021 |
|
|
|
[60]
|
Effect of Silicon Carbide Fillers on the Mechanical Properties of Glass Fibre Reinforced Epoxy Polymer Composite
|
|
2021 |
|
|
|
[61]
|
Mechanical Properties Hybrid Composite Glass Fiber, Kevlar Fiber Reinforcement with Nano Alumina
|
|
2021 |
|
|
|
[62]
|
Effects of recovered brown alumina filler loading on mechanical, hygrothermal and thermal properties of glass fiber–reinforced epoxy polymer composite
|
|
Polymers and …,
2021 |
|
|
|
[63]
|
Mechanical and Tribological Behaviour of Hybrid Multi Fibre Reinforced Nylon 6-6 Nanocomposites
|
|
MATERIALE …,
2021 |
|
|
|
[64]
|
Additive Manufacturing of Short Fiber Reinforced Thermoset Composites
|
|
2020 |
|
|
|
[65]
|
Dielectric and Magnetic Properties of Epoxy with Dispersed Iron Phosphate Glass Particles by Microwave Measurement
|
|
2020 |
|
|
|
[66]
|
Impact of Al2O3 and Mg (OH) 2 on Thermal Properties of E-glass/S-glass Polypropylene Epoxy Composites
|
|
2020 |
|
|
|
[67]
|
Validation of E-Glass Epoxy Composite Leaf Spring as an alternate to Conventional Leaf Springs
|
|
2020 |
|
|
|
[68]
|
Investigation of bending properties of E-Glass fiber reinforced polymer matrix composites for applications in micro wind turbine blades
|
|
2020 |
|
|
|
[69]
|
Optimization of Test Parameters that Influence on Dry Sliding Wear Performance of Steel Embedded Glass/Epoxy Hybrid Composites by Using the Taguchi Approach.
|
|
2020 |
|
|
|
[70]
|
Investigation on Thermo-Mechanical Behaviour of E Glass Fibre and Iron Oxide Filler Particles Reinforced Epoxy Composite
|
|
2020 |
|
|
|
[71]
|
Fabrication, characterization and some mechanical properties of graphene–kevlar epoxy hybrid
|
|
2020 |
|
|
|
[72]
|
Influence of filler incorporation on the mechanical and wear behaviour of synthetic fiber reinforced polymer matrix composites-A review
|
|
2020 |
|
|
|
[73]
|
The effect of inter laminate layer on flexural strength for unsaturated polyester resin reinforced hybrid fabric composite
|
|
2020 |
|
|
|
[74]
|
Exploring the Potential to Uniquely Manufacture Curved VARTM Epoxy Composites Using Cost-Effective FDM Molds
|
|
2020 |
|
|
|
[75]
|
Bending behavior of glass fiber reinforced composite overwrapping pvc plastic pipes
|
|
2020 |
|
|
|
[76]
|
maxlogL: A general computational procedure for Maximum Likelihood estimation in R
|
|
2020 |
|
|
|
[77]
|
Experimental evaluation of glass fiber composite reinforced with cellulose nanoparticles
|
|
2020 |
|
|
|
[78]
|
Optimization of test parameters that influence on dry sliding wear performance of steel embedded glass/epoxy hybrid composites by using the taguchi approach
|
|
Tribology in Industry,
2020 |
|
|
|
[79]
|
Mechanical performance of glass-and biofibre-reinforced hybrid composites
|
|
Glass fibre-reinforced polymer composites,
2020 |
|
|
|
[80]
|
1 Mechanical performance of glass-and biofibre-reinforced hybrid composites
|
|
2020 |
|
|
|
[81]
|
MECHANICAL BEHAVIOUR OF CARBON AND GLASSFIBRE REINFORCED EPOXY BASED COMPOSITES
|
|
2020 |
|
|
|
[82]
|
Fabrication and characterization of e glass fibrereinforced ferric oxide particle added epoxy resin hybrid composite
|
|
2019 |
|
|
|
[83]
|
Robotic Manufacturing of Fibrous Structures in Space
|
|
2019 |
|
|
|
[84]
|
Fabrication and characterization of silanized echinoidea fillers and kenaf fibre-reinforced Azadirachta-indica blended epoxy multi-hybrid biocomposite
|
|
2019 |
|
|
|
[85]
|
The Effect of Inter Laminate Layer on Flexural Strength for Unsaturated Polyester Resin Reinforced Hybrid Fabric Composite.
|
|
2019 |
|
|
|
[86]
|
EXPERIMENTAL INVESTIGATION OF ARECA/JUTE/GLASS FIBER REINFORCED HYBRID COMPOSITE PLATES
|
|
INTERNATIONAL JOURNAL OF INFORMATION AND COMPUTING SCIENCE,
2019 |
|
|
|
[87]
|
Evaluation of fracture toughness of epoxy-nickel coated carbon fiber composites with Al2O3 nano filler
|
|
2019 |
|
|
|
[88]
|
Mechanical, thermal stability and water uptake behaviour of silane-modified chitosan particle and morinda-citrifolia fibre-reinforced epoxy bio-composite
|
|
2019 |
|
|
|
[89]
|
Multi-response optimization of the mechanical properties of pultruded glass fiber composite using optimized hybrid filler composition by the gray relation grade …
|
|
2019 |
|
|
|
[90]
|
Enhancing Mechanical Properties of E-glass/Epoxy and Bagasse fiber/Epoxy Composites with Fly ash Filler
|
|
2019 |
|
|
|
[91]
|
Stress-Strain Analysis and Deformation behaviour of fibre reinforced Styrene-Ethylene-Butylene-Styrene Polymer Hybrid Nanocomposites.
|
|
2019 |
|
|
|
[92]
|
Experimental Studies on the Effect of Basalt Powder Inclusion on Mechanical Properties of Hybrid Epoxy and Polyester Composites Reinforced with Glass Fiber
|
|
2019 |
|
|
|
[93]
|
Influence of Coir Fiber Diameter and Length on Mechanical Behavior of Coconut Shell Powder–Based Polyester Resin Composites
|
|
2019 |
|
|
|
[94]
|
Mechanical properties of hybrid woven roving and chopped strand mat glass fabric reinforced polyester composites
|
|
2019 |
|
|
|
[95]
|
Preparation of polyarylene ether nitriles/fullerene composites with low dielectric constant by cosolvent evaporation
|
|
Journal of Materials Science: Materials in Electronics,
2019 |
|
|
|
[96]
|
Effect of Fiber Orientation on the Flexural Properties of Glass Fiber Reinforced, Epoxy-Matrix Composite
|
|
2019 |
|
|
|
[97]
|
The influence of the powder additive upon selected mechanical properties of a composite
|
|
2019 |
|
|
|
[98]
|
Effect of micro-crystalline cellulose particles on mechanical properties of alkaline treated jute fabric reinforced green epoxy composite
|
|
Cellulose,
2019 |
|
|
|
[99]
|
Influence of Ca 2 SiO 4 as fillers on Mechanical Properties of Epoxy Polymer Matrix Composites
|
|
International Journal of Engineering Research & Technology (IJERT),
2019 |
|
|
|
[100]
|
Trends and Challenges on the Development of Hybridized Natural Fiber Composites
|
|
2019 |
|
|
|
[101]
|
Mechanical Behavior of Epoxy Nano composites
|
|
2019 |
|
|
|
[102]
|
Experimental Analysis on Mechanical Behaviour of E-Glass Fiber Reinforced with Polyaromatic Hydrocarbon Composites
|
|
2019 |
|
|
|
[103]
|
Experimental Analysis on Mechanical Behaviour of E-Glass Fiber Reinforced with Polyaromatic Hydrocarbon Composites.
|
|
2019 |
|
|
|
[104]
|
FABRICATION AND CHARACTERIZATION OF E-GLASS FIBRE-REINFORCED FERRIC OXIDE PARTICLE ADDED EPOXY RESIN HYBRID COMPOSITE
|
|
2019 |
|
|
|
[105]
|
Mechanical Property Evaluation of Woven Glass/Basalt Fiber Reinforced Epoxy Resin Composites
|
|
International Journal of Engineering Research & Technology (IJERT),
2018 |
|
|
|
[106]
|
Synthesis and Characterization of Epoxy based Hybrid Composite Reinforced with Glass Fiber and Milled Carbon
|
|
Materials Today: Proceedings,
2018 |
|
|
|
[107]
|
OPTIMIZING THE FORMULATION OF E-GLASS FIBER AND COTTON SHELL PARTICLES HYBRID COMPOSITES FOR THEIR MECHANICAL BEHAVIOR BY …
|
|
2018 |
|
|
|
[108]
|
Synthesis and Characterization of Non-Halogenic Fire Retardant Composite with Epoxy Resin and Additive Combination Al (OH) 3/Mg (OH) 2
|
|
The 24th Regional Symposium on Chemical Engineering (RSCE 2017),
2018 |
|
|
|
[109]
|
Mechanical properties of fly ash composites—A review
|
|
Energy Sources Part A Recovery Utilization and Environmental Effects,
2018 |
|
|
|
[110]
|
Evaluation of Mechanical Properties of Epoxy Based Hybrid Composites & MCDM Technique for Composite Selection
|
|
2018 |
|
|
|
[111]
|
Effect of Fillers on Mechanical Properties of Polymer Matrix Composites
|
|
Materials Today: Proceedings,
2018 |
|
|
|
[112]
|
Fabrication and Charactarization of Hybrid Polymer Composite
|
|
International Journal of Advanced Research in Science, Engineering and Technology,
2018 |
|
|
|
[113]
|
Evaluation of Mechanical Properties of Glass Fiber Reinforced Epoxy Polymer Composites with Alumina, Titanium dioxide and Silicon Carbide Fillers
|
|
Materials Today: Proceedings,
2018 |
|
|
|
[114]
|
Three point bending of hand laminated fiber composites
|
|
Composites Theory and Practice,
2018 |
|
|
|
[115]
|
Influence of surface treatments on chopped strand mat E-glass fiber reinforced with Epoxy polymer matrix composites
|
|
2018 |
|
|
|
[116]
|
BUCKLING BEHAVIOUR OF WOVEN GLASS FIBER COMPOSITE LAMINATE WITH DIFFERENT CUTOUTS
|
|
International Journal of Pure and Applied Mathematics,
2018 |
|
|
|
[117]
|
Pengaruh Komposisi Pengisi Serta Tekanan Compression Molding Terhadap Sifat Mekanik Komposit Berpengisi Partikel Zinc Oxide (Zno)
|
|
2018 |
|
|
|
[118]
|
Development of E-glass woven fabric/polyester resin polymer matrix composite and study of mechanical properties
|
|
2018 |
|
|
|
[119]
|
Nutraceuticals: New Concept of Medicines
|
|
International Journal of Trend in Scientific Research and Development (IJTSRD),
2018 |
|
|
|
[120]
|
Optimizing the formulation Of E-glass fiber and cotton shell particles hybrid composites for their mechanical behavior by mixture design analysis
|
|
2018 |
|
|
|
[121]
|
Mechanical Strength Behaviour of Silane Treated E-glass Fibre/Al 6061 & SS-304 Wire Mesh Reinforced Epoxy Resin Hybrid Composite
|
|
Silicon,
2018 |
|
|
|
[122]
|
Mechanical, wear and thermal behaviour of hemp fibre/egg shell particle reinforced epoxy resin bio composite
|
|
Transactions of the Canadian Society for Mechanical Engineering,
2018 |
|
|
|
[123]
|
Effect of basalt powder on mechanical properties and dynamic mechanical thermal analysis of hybrid epoxy composites reinforced with glass fiber
|
|
Journal of the Chinese Advanced Materials Society,
2018 |
|
|
|
[124]
|
Cracking Behaviour of Glass Fibre-Reinforced Polymers under Combined Compression-Shear Cyclic Loading
|
|
2018 |
|
|
|
[125]
|
Mercerization Treatment Parameter Effect on Coir Fiber Reinforced Polymer Matrix Composite
|
|
Materials Research Express,
2018 |
|
|
|
[126]
|
Experimental study wear rate of glass fibre reinforced epoxy polymer composites filled with aluminium powder
|
|
Materials Today: Proceedings,
2017 |
|
|
|
[127]
|
Effect of Coconut Shell Powder as Filler on the Mechanical Properties of Coir-polyester Composites
|
|
2017 |
|
|
|
[128]
|
Study of mechanical property and wear behaviour of GFRP composite filled with carbon nano fiber
|
|
Materials Today: Proceedings,
2017 |
|
|
|
[129]
|
To study of mechanical testing's for walnut shell and polyester resin with fiber glass composites
|
|
International Advanced Research Journal in Science, Engineering and Technology,
2017 |
|
|
|
[130]
|
Influence of fiber surface treatments on physico-mechanical behaviour of jute/epoxy composites impregnated with aluminium oxide filler
|
|
Journal of Composite Materials,
2017 |
|
|
|
[131]
|
Effect of Various Fillers on Mechanical Properties of Glass Fiber Reinforced Polymer Composites: A Review
|
|
International Journal of Emerging Trends in Science and Technology,
2017 |
|
|
|
[132]
|
Mechanical Characterization of Glass Fiber (Woven Roving/Chopped Strand Mat E-Glass Fiber) Reinforced Polyester Composites
|
|
2017 |
|
|
|
[133]
|
FABRICATION AND CHARECTERIZATION OF MULTILAYER GFRP COMPOSITES WITH DIFFERENT ORIENTATIONS
|
|
2017 |
|
|
|
[134]
|
Investigation of Mechanical Properties of Aluminium Reinforced Glass Fibre Polymer Composites
|
|
2017 |
|
|
|
[135]
|
Comparative study on Mechanical properties of E-glass/Epoxy laminates filled with Silicon carbide, Activated charcoal and Mica
|
|
International Research Journal of Engineering and Technology,
2017 |
|
|
|
[136]
|
Flexural and Charpy impact behaviour of epoxy/glass fabric treated by nano-SiO2 and silane blend
|
|
Pharmaceutical Biology,
2017 |
|
|
|
[137]
|
GUIDELINES FOR AN OPTIMIUM BLADE LAY-UP SCHEDULE
|
|
2017 |
|
|
|
[138]
|
Mechanical and Dynamic Behaviour of Epoxy/Mwcnts and Epoxy/Al2O3 Nanocomposites
|
|
2017 |
|
|
|
[139]
|
Synthesis and Characterisation of Unsaturated Polyester Resin/Aluminium Hydroxide/Magnesium Hydroxide Fire Retardant Composite
|
|
2017 |
|
|
|
[140]
|
Synthesis and characterization of non halogen fire retardant composite through combination of epoxy resin, Al(OH)3 additive and filler
|
|
AIP Conference Proceedings,
2017 |
|
|
|
[141]
|
Strength characterization of glass-carbon hybrid reinforcements-an experimental investigation
|
|
2017 |
|
|
|
[142]
|
Synthesis and characterization of non halogen fire retardant composite through combination of epoxy resin, Al (OH) 3 additive and filler
|
|
AIP Conference Proceedings,
2017 |
|
|
|
[143]
|
Is Kevlar 29/Epoxy Composite an Alternate for Drive Shaft
|
|
2016 |
|
|
|
[144]
|
Effect of various fillers on mechanical properties of Glass Fibre Reinforced Polymer Composites: A review
|
|
2016 |
|
|
|
[145]
|
Development of a photocurable glass-fiber reinforced epoxy-amine/thiol-ene composite
|
|
Journal of Polymer Research,
2016 |
|
|
|
[146]
|
Polyphenylene sulphide/carbon fiber composites: study on their thermal, mechanical and microscopic properties
|
|
Iranian Polymer Journal,
2016 |
|
|
|
[147]
|
Mechanical, Thermal, and Microscopic Profile of Novel Glass Fiber‐Reinforced Polyester Composites as a Function of Barium Sulfate Loading
|
|
Advances in Polymer Technology,
2016 |
|
|
|
[148]
|
Thermo-mechanical characterization of siliconized E-glass fiber/hematite particles reinforced epoxy resin hybrid composite
|
|
Applied Surface Science,
2016 |
|
|
|
[149]
|
Mechanical, physical and dynamical properties of glass fiber and waste fishnet hybrid composites
|
|
Polymer Bulletin,
2016 |
|
|
|
[150]
|
Evaluation of Mechanical Properties of Synthetic Fiber Reinforced Polymer Composites by Mixture Design Analysis
|
|
Polymers and Polymer Composites,
2016 |
|
|
|
[151]
|
Is Kevlar29/Epoxy Composite an Alternate for Drive Shaft?
|
|
2016 |
|
|
|
[152]
|
Review on Development of Glass Fiber/Epoxy Composite Material and its Characterizations
|
|
International Journal of Science, Engineering and Technology Research (IJSETR),
2016 |
|
|
|
[153]
|
Development and Comparison of Mechanical Properties of Uni-Directional E-Glass/Epoxy Composite with Coal Ash as Filler
|
|
2016 |
|
|
|
[154]
|
Properties of Glass Fiber Hybrid Composites: A Review
|
|
Mineral Processing and Extractive Metallurgy Review,
2016 |
|
|
|
[155]
|
Inter laminar shear strength behavior of acid, base and silane treated E-glass fibre epoxy resin composites on drilling process
|
|
Defence Technology,
2016 |
|
|
|
[156]
|
PLY WISE FAILURE ANALYSIS OF MONO LEAF SPRING USING HYBRID C-GFRP COMPOSITES
|
|
2016 |
|
|
|
[157]
|
Characterisation of the structural properties of ECNF embedded pan nanomat reinforced glass fiber hybrid composites
|
|
2016 |
|
|
|
[158]
|
Morphology and thermomechanical properties of epoxy composites highly filled with waste bulk molding compounds (BMC)
|
|
Journal of Polymer Engineering,
2015 |
|
|
|
[159]
|
Fabrication and Study of Mechanical Properties of Sisal, Glass Fiber and MWCNTS Reinforced Polymer
|
|
International Journal of Innovative Research in Science, Engineering and Technology,
2015 |
|
|
|
[160]
|
Effect of Epoxy modifiers (Bagasse fiber/Bagasse ash/Coal powder/Coal Fly ash) on mechanical properties of Epoxy/Glass fiber hybrid composites
|
|
2015 |
|
|
|
[161]
|
Synthesis and characterization of zinc oxide (ZnO) filled glass fiber reinforced polyester composites
|
|
Materials & Design,
2015 |
|
|
|
[162]
|
EXPERIMENTAL INVESTIGATION OF TENSILE PROPETIES OF STITCHED GLASS FIBER EPOXY COMPOSITE
|
|
Int. J. Engg. Res. & Sci. & Tech,
2015 |
|
|
|
[163]
|
Passive Control of Aerodynamic Load in Wind Turbine Blades
|
|
2015 |
|
|
|
[164]
|
Tensile properties of polymer repair materials-effect of test parameters
|
|
2015 |
|
|
|
[165]
|
Effect of silicon carbide and calcium sulphate on E-glass/epoxy composites
|
|
2015 |
|
|
|
[166]
|
Effect of Fillers on Mechanical, Thermal and Fire Resistance Properties of E-Glass/Epoxy Composites
|
|
International Journal of Engineering Research & Technology,
2015 |
|
|
|
[167]
|
Investigation of Mechanical Properties on Epoxy, Fly Ash and E-Glass Fiber Reinforcement Composite Material
|
|
International Journal of Machine and Construction Engineering,
2015 |
|
|
|
[168]
|
Fabrication and Study of Mechanical Properties of Sisal, Glass Fiber and MWCNT Reinforced Polymer
|
|
2015 |
|
|
|
[169]
|
Fabrication and Evaluation of Mechanical Properties of Fe2O3 Particulate Filled Hybrid Composites
|
|
Journal of Advance …,
2015 |
|
|
|
[170]
|
Mechanical Properties Testing of Uni-directional and Bi-directional Glass Fibre Reinforced Epoxy Based Composites
|
|
2014 |
|
|
|
[171]
|
TENSILE AND FLEXURAL STRENGTH OF GLASS FIBER EPOXY COMPOSITES
|
|
International Conference on Advanced Materials and manufacturing Technologies (AMMT),
2014 |
|
|
|
[172]
|
Study of ber delamination on silane modified ramie ber/OMMTnano-clay epoxy composite under low-velocity impact, shear load, and high-speeddrilling
|
|
|
|
|
|
[173]
|
Composites Part C: Open Access
|
|
|
|
|
|
[174]
|
Measurement of surface roughness in drilling on epoxy matrix composite reinforced with E-Glass fibre and calophyllum inophyllum powder in comparison with …
|
|
|
|
|
|
[175]
|
Influence of Ca2SiO4 as fillers on Mechanical Properties of Epoxy Polymer Matrix Composites
|
|
|
|
|
|
[176]
|
Partikül dolgulu fiber takviyeli polimer esaslı kompozit malzemelerin düşük hızlı darbe davranışlarının incelenmesi
|
|
|
|
|