Author(s)

U. S. Mbamara, O.O. Akinwumi, E.I. Obiajunwa, I.A.O. Ojo, E.O.B. Ajayi

Centre for Energy Research and Development, Obafemi Awolowo University, Ile-Ife, Nigeria.
Department of Chemistry, Obafemi Awolowo University, Ile-Ife, Nigeria.
Department of Physics, Federal University of Technology, Owerri, Nigeria.
Department of Physics, Obafemi Awolowo University, Ile-Ife, Nigeria.

The synthesis and comprehensive analysis of nitrogen-doped zinc oxide thin films grown from a compound precursor of zinc acetate and ammonium acetate has been reported. The precursor was processed in different ratios of the zinc acetate-ammonium acetate additives, and each combination was used to deposit a thin film using metalorganic chemical vapour deposition (MOCVD) method. The produced thin films were characterised using Rutherford backscattering (RBS) spectroscopy, uv-visible spectrometry, x-ray diffractometry, four point probe measurements and optical microscopy. The deposited thin films showed a fairly consistent zinc:oxygen:nitrogen ratio of 4.4:3.7:1, the film structures were quasicrystalline and the sheet resistivities were high, while other familiar characteristics like optical transmittance, bandgap, thermal stability, etc. were maintained in the grown films. Applications in device fabrication and active sensor devices were hence envisaged as the emergent potentials of the thin films.

Zinc Oxide; Thin Films; N-Doping; Precursor; Characterisation

U. Mbamara, O. Akinwumi, E. Obiajunwa, I. Ojo and E. Ajayi, "Deposition and Characterisation of Nitrogen-Doped Zinc Oxide Thin Films by MOCVD Using Zinc Acetate—Ammonium Acetate Precursor," Journal of Modern Physics, Vol. 3 No. 8, 2012, pp. 652-659. doi: 10.4236/jmp.2012.38089.